• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.977-983
• /
• 2007

최근 근거리에서 수신 모듈에 무선으로 전력을 전달하는 시스템이 많아지고 있다. 무선으로 전력을 공급할 때, 수신 공간의 효율적인 사용을 위하여 ferrite core 주변에 코일을 감아 유도기 전력을 얻는다. 본 논문에서는 100kHz 균일한 단방향의 자계 환경 내에 위치한 페라이트 코어 내부의 자계 분포를 분석한다. 수치 분석을 위 한 시뮬레이터는 유한요소 기법을 적용한 Ansoft사의 Maxwell Tool을 사용하였다. 페라이트 코어의 비투자율의 변화에 따라 집속되는 자속 밀도의 변화를 알아보고, 코일의 권선을 위해 코어의 일부를 잘라내었을 시 총자속의 변화량을 알아보았다. 계산 결과, 100 kHz 자계 환경 내에서 작은 페라이트 코어를 이용하면 코어 내에 약 $3.5{\sim}4$배의 자속 밀도가 증강됨을 확인하였다. 비투자율이 800이면서 반지름의 길이가 4.75 mm인 페라이트 코어의 가장자리에 0.5mm를 도려내었을 때 총 자속은 23% 감소함을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.176-176
• /
• 2010

One of the critical issues for applications of flexible organic thin film transistors (OTFTs) for flexible electronic systems is the electrical stabilities of the OTFT devices, including variation of the current on/off ratio (Ion/Ioff), leakage current, threshold voltage, and hysteresis under repetitive mechanical deformation. In particular, repetitive mechanical deformation accelerates the degradation of device performance at the ambient environment. In this work, electrical stability of the pentacene organic thin film transistors (OTFTs) employing multi-stack hybrid encapsulation layers was investigated under mechanical cyclic bending. Flexible bottom-gated pentacene-based OTFTs fabricated on flexible polyimide substrate with poly-4-vinyl phenol (PVP) dielectric as a gate dielectric were encapsulated by the plasma-deposited organic layer and atomic-layer-deposited inorganic layer. For cyclic bending experiment of flexible OTFTs, the devices were cyclically bent up to 105 times with 5mm bending radius. In the most of the devices after 105 times of bending cycles, the off-current of the OTFT with no encapsulation layers was quickly increased due to increases in the conductivity of the pentacene caused by doping effects from $O_2$ and $H_2O$ in the atmosphere, which leads to decrease in the Ion/Ioff and increase in the hysteresis. With encapsulation layers, however, the electrical stabilities of the OTFTs were improved significantly. In particular, the OTFTs with multi-stack hybrid encapsulation layer showed the best electrical stabilities up to the bending cycles of $10^5$ times compared to the devices with single organic encapsulation layer. Changes in electrical properties of cyclically bent OTFTs with encapsulation layers will be discussed in detail.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.250-250
• /
• 2012

Recently, multiferroic materials have attracted much attention due to their fascinating fundamental physical properties and potential technological applications in magnetic/ferroelectric data storage systems, quantum electromagnets, spintronics, and sensor devices. Among single-phase multiferroic materials, $BiFeO_3$, in particular, has received considerable attention because of its very interesting magnetoelectric properties for application to spintronics. Enhanced ferromagnetism was found by Fe-site ion substitution with magnetic ions. In this study, $BiFe_{1-x}Ni_xO_3$ (x=0 and 0.05) bulk ceramic compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Fe_3O_4$ and NiO powders were mixed with the stoichiometric proportions, and calcined at $450^{\circ}C$ for 24 h to produce $BiFe_{1-x}Ni_xO_3$. Then, the samples were directly put into the oven, which was heated up to $800^{\circ}C$ and sintered in air for 20 min. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The Raman measurements were carried out with a Raman spectrometer with 514.5-nm-excitation Ar+-laser source under air ambient condition on a focused area of $1-{\mu}m$ diameter. The field-dependent magnetization and the temperature-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The x-ray diffraction study demonstrates the compressive stress due to Ni substitution at the Fe site. $BiFe_{0.95}Ni_{0.05}O_3$ exhibits the rhombohedral perovskite structure R3c, similar to $BiFeO_3$. The lattice constant of $BiFe_{0.95}Ni_{0.05}O_3$ is smaller than of $BiFeO_3$ because of the smaller ionic radius of Ni3+ than that of Fe3+. The field-dependent magnetization of $BiFe_{0.95}Ni_{0.05}O_3$ exhibits a clear hysteresis loop at 300 K. The magnetic properties of $BiFe_{0.95}Ni_{0.05}O_3$ were improved at room temperature because of the existence of structurally compressive stress.

• 분석과학
• /
• 제16권5호
• /
• pp.391-398
• /
• 2003

하나로의 즉발감마선 방사화분석 장치를 이용하여 생물시료중의 붕소의 정량을 위한 기초연구를 수행하였다. 측정조건에 대한 특성조사를 위해 시료에 대한 중성자 조사 위치에서 중성자속 및 균질도를 측정하였다. 시료위치에서 열중성자 빔의 크기가 $2{\times}2cm^2$ 되도록 집속하였으며, 측정된 선속은 $1.0{\sim}6.5{\times}10^7n{\cdot}cm^{-2}{\cdot}s^{-1}$ 범위를 나타냈으며, 중심부로부터 반경 4.5 mm 이내 및 9 mm 이내에서 각각 $5.77{\pm}0.71{\times}10^7n{\cdot}cm^{-2}{\cdot}s^{-1}$, $4.68{\pm}1.64{\times}10^7n{\cdot}cm^{-2}{\cdot}s^{-1}$이었다. 따라서 양질의 균일한 조사를 위해서 시료의 크기를 10 mm 이내로 조정하였다. 검출 시스템은 컴프턴 산란에 의한 백그라운드 요인을 억제하고 분석감도를 높이기 위해 설계되었으며, 감마선 계측 시스템의 에너지 교정과 컴프턴 억제율을 조사하기 위해 NaCl 표준체를 이용하여 단일 및 컴프턴 모드로 백그라운드를 측정하였다. 또한 정확한 붕소의 측정을 위해 시료의 매질효과로서 발생하는 분광학적 Na의 472 keV 피이크에 대한 간섭효과를 결정하였으며, 세 가지 인증표준물질 (NIST SRM 1570a, 1547, 1573a)을 이용한 붕소농도 측정시험을 두 가지 모드로 실시한 후 결과를 비교하였다.

• 천문학회지
• /
• 제41권3호
• /
• pp.65-76
• /
• 2008

We have investigated the optical properties of the global haze on Titan from spectra recorded between 7100 and $9200{\AA}$, where $CH_4$ absorption bands of various intensities occur. The Titan spectra were obtained on Feb. 23, 2005 (UT), near the times of the Cassini T3 flyby and Huygens probe, using an optical echelle spectrograph (BOES) on the 1.8-m telescope at Bohyunsan Observatory in Korea. In order to derive the optical properties of the haze as a function of altitude, we developed an inversion radiative-transfer program using an atmospheric model of Titan and laboratory $CH_4$ absorption coefficients available from the literature. The derived extinction coefficients of the haze increase toward the surface, and the coefficients at shorter wavelengths are greater than those at longer wavelengths for the 30 - 120 km altitude range, indicating that the Titanian haze becomes optically thin toward the longer wavelength range. Total optical depths of the haze are estimated to be 1.4 and 1.2 for the 7270 - $7360{\AA}$ and 8940 - $9150{\AA}$ ranges, respectively. Based on the Huygens/DISR data set, Tomasko et al. (2005) reported total optical depths of 2.5 - 3.5 at $8290{\AA}$, depending on the assumed fractal aggregate particle model. The total optical depths based on our results are smaller than those of Tomasko et al., but they partially overlap with their results if we consider a large uncertainty from possible variations of the $CH_4$ mixing ratio over Titan's disk. We also derived the single scattering albedo of the haze particles as a function of altitude: it is less than 0.5 at altitudes higher than ${\sim}150\;km$, and approaches 1.0 toward the surface. This behavior suggests that, at altitudes above ${\sim}150\;km$, the average particle radius is smaller than the wavelengths, whereas near the surface, it becomes comparable or greater.

• 한국방재학회 논문집
• /
• 제8권1호
• /
• pp.9-14
• /
• 2008

곡선교의 경우 구조적인 기능이나 미관을 고려하여 강상자형교의 사용이 증가하고 있다. 강상자형교는 비틀림에 대한 강성이 뛰어나고 폐합단면을 가지므로 개단면에 비해 부식에 대해서 유리하며 가설 시에도 안정성을 갖는 장점이 있다. 곡선 강상자형교의 설계는 관용적으로 가로보의 강성을 이용하여 윤하중 횡분배를 유도하는 격자해석으로 실시되고 있다. 본 연구에서는 곡선강상자형교에 대하여 유한요소 해석을 실시하여 곡률, 가로보 및 다이아프램이 윤하중의 횡분배에 미치는 영향에 분석하였다. 해석결과 곡선교에서 곡률은 횡분배에 큰 영향을 미쳤으며 곡률이 증가할수록 분배계수가 증가하는 것을 알 수 있었다. 지점부 다이아프램 외에 지간 중앙에 설치되는 다이아프램 1개는 윤하중의 횡분배와 구조적 안정성에 크게 기여하였으나 추가적인 다이아프램의 설치는 하중의 횡분배에 크게 영향을 주지 못하였다. 콘크리트 슬래브 강성은 가로보에 의한 횡분배 효과보다 크게 나타난 것으로 곡선 강박스교 설계 시에는 콘크리트 슬래브 강성의 횡분배 효과를 고려하여야 할 것이다.

• 한국정보통신학회논문지
• /
• 제19권2호
• /
• pp.272-278
• /
• 2015

본 논문은 ISM (Industry Science and Medical) 대역에서 동시 다발적으로 운용 가능성이 높은 무선 헤드셋 수신기 시스템과 WiFi (Wireless Fidelity) 시스템간의 간섭 영향을 분석하였다. WiFi는 IEEE (Institute of Electrical and Electronic Engineers ) 802.11b 규격을 바탕으로 하여 특성 및 파라미터를 적용하였으며, 분석방법으로는 최소결합 손실(MCL; Minimum Coupling Loss) 방법과 몬테카를로(MC; Monte Carlo) 방법을 사용하였다. MCL 방법을 통해서 무선 헤드셋의 수신기와 WiFi기기의 송신기 간의 보호이격거리를 도출하였으며, 통계적 분석을 바탕으로 한 MC 방법을 이용해서 5 %이하의 간섭 확률을 만족시켜 주기 위한 단일 간섭원에 따른 보호이격거리 도출 및 희생원의 셀 반경에 따른 허용 가능한 최대 간섭원 수를 도출하였다. 분석 결과는 ISM 대역에서 사용되고 있는 무선 헤드셋 시스템 및 기타 소출력 기기들의 공유방안으로 활용될 것으로 기대된다.

• 한국방사선학회논문지
• /
• 제13권4호
• /
• pp.645-652
• /
• 2019

폴리 인산염 모체에 이온 반경이 유사한 Sr과 Eu 치환에 적합한 형광체를 찾아 단일 희토류 이온이 첨가된 형광체를 합성하고 후처리를 통해 형광 영역이 변화를 연구하였다. 고상법을 이용하여 Eu 이온이 첨가된 $NaSr(PO_3)_3$형광체를 합성하고 탄소열환원법을 통하여 $NaSr(PO_3)_3:Eu^{2+}$ 형광체를 완성하였다. 두 형광체 모두 X선 회절 측정을 통하여 결정상을 확인하였다. $NaSr(PO_3)_3:Eu^{3+}$의 여기 및 방출 스펙트럼 모두 $Eu^{3+}$ 농도가 증가할수록 형광 강도가 증가하였고 농도소광을 확인하였다. 방출스펙트럼에서 $Eu^{3+}$ 농도가 높아질수록 $Eu^{3+}$ 주변 환경의 국부적 대칭성이 높아지는 것 알 수 있었다. $NaSr(PO_3)_3:Eu^{2+}$ 농도별 방출스펙트럼에서 $Eu^{2+}$ 이온 농도 증가에 따른 $Eu^{2+}$ 이온 사이의 임계 거리가 가장 가까운 $Eu^{2+}$ 사이의 에너지 전달에 의해 형광이 감소하는 농도소광의 메커니즘을 확인하였다. 단일 희토류 이온이 첨가된 형광체의 후처리를 통해 형광 영역 변화가 가능하며 형광체 내 $Eu^{3+}$ 주변 환경의 국부적 대칭성과 $Eu^{2+}$ 이온간 거리에 따른 에너지 전달 및 농도소광 메커니즘 연구를 통하여 형광 특성 응용에 적합하고 효율성이 높은 형광체 개발에 좋은 모체 결정으로 사용 될 것으로 기대된다.

• 대한건축학회논문집:계획계
• /
• 제35권1호
• /
• pp.73-81
• /
• 2019

The purpose of this study is to draw safe environmental project factors for enhancing the safety of children in peripheral space around children's park and suggest environmental project measures for peripheral spaces around children's parks, based on the survey of children's park users' consciousness on peripheral spaces. Physical space range for this study was limited to low-rise housing area wihtin the radius of 250m, as peripheral spaces around children's parks in which children's playgrounds were built. In addition, the target areas for examining users' consciousness on peripheral spaces around children's parks were selected according to following criteria. 1)areas with highter portion of children; 2) those with higher portion of single-family houses/multi-housing/tenement houses, which constitute low-rise housing areas; and 3) those with higher safety accident rate of children, which was measured based on criminal and traffic accidents. The finding are as follows: first, users' consciousness on safety accidents that are likely to occur in peripheral spaces around children's parks was examined to show that there is most prominent difference between satisfaction and necessity. This result suggests that users are clearly conscious of the necessity of environmental improvement rather than the satisfaction with the current peripheral environment around children's park.; second, for the difference between satisfaction with and necessity of environmental project factors for access/boundary spaces around children's pakrs, there is most significant difference between the satisfaction with and the necessity of establishment of facilities against illegal parking for clear visibility of community roads, for access spaces, and the separate establishment of bicycle racks around main entry into parks, for boundary spaces. Users' necessity of the establishment of them is judged to be derived from the fact that the safety of children and even adults is threatened, because bicycles invaded into the deep inside of children parks. This study analyzed a correlation between satisfaction and necessity through factor and IPA analysis, and should be initially considenred if the future environmental improvement project would be conducted to promote safe environment in peripheral spaces around children's parks in the future. It will be necessary to provide practical environmental project factors through a field investigation.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1362-1369
• /
• 2018

A method aimed at improving the beam-wave interaction efficiency by changing the coupling slot configuration has been proposed in the study of extended interaction oscillators (EIOs). The dispersion characteristics, coupling coefficient and interaction impedance of the high-frequency structure based on different types of coupling slots have been investigated. Four types of coupled cavity structures with different layouts of the coupling slots have been compared to improve the beam-wave interaction efficiency, so as to analyze the beam-wave interaction and practical applications. In order to determine the improvement of the coupling slot to a coupled cavity circuit in an EIO, we designed four nine-gap EIOs based on the coupled cavity structure with different coupling slot configurations. With different operating frequencies and voltages takes into consideration, beam voltages from 27 to 33 kV have been simulated to achieve the best beam-wave interaction efficiency so that the EIOs are able to work in the $2{\pi}$ mode. The influence of the Rb and the ds on the output power is also taken into consideration. The Rb is the radius of the electron beam, and the ds is the width of the coupling slot. The simulation results indicate that a single-slot-type EIO has the best beam-wave interaction efficiency. Its maximum output power is 2.8 kW and the efficiency is 18% when the operating voltage is 31 kV and electric current is 0.5 A. The output powers of these four EIOs that were designed for comparison are not less than 1.7 kW. The improved coupling-slot configurations enables the extended interaction oscillator to meet the different engineering requirements better.