• Smart Structures and Systems
• /
• 제21권6호
• /
• pp.727-740
• /
• 2018

Tuned mass dampers (TMDs) are passive damping devices widely employed to mitigate the pedestrian-induced vibrations on footbridges. The TMD design must ensure an adequate performance during the overall life-cycle of the structure. Although the TMD is initially adjusted to match the natural frequency of the vibration mode which needs to be controlled, its design must further take into account the change of the modal parameters of the footbridge due to the modification of the operational and environmental conditions. For this purpose, a motion-based design optimization method is proposed and implemented herein, aimed at ensuring the adequate behavior of footbridges under uncertainty conditions. The uncertainty associated with the variation of such modal parameters is simulated by a probabilistic approach based on the results of previous research reported in literature. The pedestrian action is modelled according to the recommendations of the Synpex guidelines. A comparison among the TMD parameters obtained considering different design criteria, design requirements and uncertainty levels is performed. To illustrate the proposed approach, a benchmark footbridge is considered. Results show both which is the most adequate design criterion to control the pedestrian-induced vibrations on the footbridge and the influence of the design requirements and the uncertainty level in the final TMD design.

• Journal of Communications and Networks
• /
• 제8권1호
• /
• pp.116-122
• /
• 2006

Most of the multimedia applications require strict quality of service (QoS) guarantee during the communication between a single source and multiple destinations. This gives rise to the need for an efficient QoS multicast routing strategy. Determination of such QoS-based optimal multicast routes basically leads to a multi-objective optimization problem, which is computationally intractable in polynomial time due to the uncertainty of resources in Internet. This paper describes a network model for researching the routing problem and proposes a new multicast tree selection algorithm based on genetic algorithms to simultaneously optimize multiple QoS parameters. The paper mainly presents a QoS multicast routing algorithm based on genetic algorithm (QMRGA). The QMRGA can also optimize the network resources such as bandwidth and delay, and can converge to the optimal or near-optimal solution within few iterations, even for the networks environment with uncertain parameters. The incremental rate of computational cost can close to polynomial and is less than exponential rate. The performance measures of the QMRGA are evaluated using simulations. The simulation results show that this approach has fast convergence speed and high reliability. It can meet the real-time requirement in multimedia communication networks.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.402-410
• /
• 2013

In this paper, a novel and robust Power System Stabilizer (PSS) is proposed as an effective approach to improve stability in electric power systems. The dynamic performance of proposed PSS has been thoroughly compared with Conventional PSS (CPSS). Both the Real Coded Genetic Algorithm (RCGA) and Particle Swarm Optimization (PSO) techniques are applied to optimum tune the parameter of both the proposed PSS and CPSS in order to damp-out power system oscillations. Due to the high sufficiency of both the RCGA and PSO techniques to solve the very non-linear objective, they have been employed for solution of the optimization problem. In order to verify the dynamic performance of these devices, different conditions of disturbance are taken into account in Single Machine Infinite Bus (SMIB) power system. Moreover, to ensure the robustness of proposed PSS in damping the power system multi-mode oscillations, a Multi Machine (MM) power system under various disturbances are considered as a test system. The results of nonlinear simulation strongly suggest that the proposed PSS significantly enhances the power system dynamic stability in both of the SMIB and MM power system as compared to CPSS.

• 전산구조공학
• /
• 제9권3호
• /
• pp.179-186
• /
• 1996

본 연구에서는 구조체의 위상학적 최적화를 위한 비선형 formulation(NLP)가 개발, 검토되었다. 이 NLP는 multiple-loading하에서 임의의 오브젝티브 함수, 응력, 변위 제약조건들을 쉽게 다룰 수가 있다. 또한 이 NLP는 해석과 최적화 디자인을 동시에 실시함으로써 요소 사이즈가 영으로 접근함에 따른 강성 매트릭스의 singularity를 피할 수 있다. 즉, 평형 방정식을 등제약조건으로 치환함으로써 강성 매트릭스 그 자체나 그의 역매트릭스를 구할 필요도 없어진다. 이 NLP는 multiple-loading conditon하에서 테스트되었으며, 이를 통해 이 NLP가 다양한 제약조건하에서 강력하게 작용함이 입증되었다.

• 한국IT서비스학회지
• /
• 제19권2호
• /
• pp.109-124
• /
• 2020

Facing the 4^th Industrial Revolution era, researches on artificial intelligence have become active and attempts have been made to apply machine learning in various fields. In the field of finance, Robo Advisor service, which analyze the market, make investment decisions and allocate assets instead of people, are rapidly expanding. The stock price prediction using the machine learning that has been carried out to date is mainly based on the prediction of the market index such as KOSPI, and utilizes technical data that is fundamental index or price derivative index using financial statement. However, most researches have proceeded without any explicit verification of the prediction rate of the learning data. In this study, we conducted an experiment to determine the degree of market prediction ability of basic indicators, technical indicators, and system risk indicators (AR) used in stock price prediction. First, we set the core parameters for each financial indicator and define the objective function reflecting the return and volatility. Then, an experiment was performed to extract the sample from the distribution of each parameter by the Markov chain Monte Carlo (MCMC) method and to find the optimum value to maximize the objective function. Since Robo Advisor is a commodity that trades financial instruments such as stocks and funds, it can not be utilized only by forecasting the market index. The sample for this experiment is data of 17 years of 1,500 stocks that have been listed in Korea for more than 5 years after listing. As a result of the experiment, it was possible to establish a meaningful trading strategy that exceeds the market return. This study can be utilized as a basis for the development of Robo Advisor products in that it includes a large proportion of listed stocks in Korea, rather than an experiment on a single index, and verifies market predictability of various financial indicators.

• 한국수자원학회논문집
• /
• 제52권4호
• /
• pp.291-300
• /
• 2019

상수관망시스템 내 관로가 파손될 경우, 수리를 위해 파손 관로와 인접한 밸브를 차폐하게 된다. 이때, 밸브 차폐로 인해 관망의 일부분이 고립되어 용수공급이 차단되는 단수구역이 발생하게 된다. 단수구역은 파손 관을 포함한 직접고립지역과 직접고립지역으로 인해 의도치 않게 수원으로부터 물 공급이 차단되는 간접고립지역으로 구분된다. 따라서, 관 파손에 의한 단수구역 및 단수용량은 시스템 내 설치된 밸브의 개수와 위치에 크게 영향을 받게 된다. 본 연구에서는 상수관망시스템 내 최적의 밸브위치를 결정하기 위해 최적화 모형을 개발하고 적용하였다. 예시 관망을 대상으로 단수용량 최소화를 목적함수로 설정한 단목적 최적화와 단수용량과 밸브 설치비용을 동시에 최소화하는 다목적 최적화를 각각 수행하였으며, 두 가지 모형을 통해 도출된 최적 밸브설치 결과를 비교, 분석하였다.

• 한국경영과학회지
• /
• 제41권2호
• /
• pp.129-139
• /
• 2016

This paper presented a robust ship scheduling model using the quadratic programming problem. Given a set of available carriers under control and a set of cargoes to be transported from origin to destination, a robust ship scheduling that can minimize the mean-variance objective function with the required level of profit can be modeled. Computational experiments concerning relevant maritime transportation problems are performed on randomly generated configurations of tanker scheduling in bulk trade. In the first stage, the optimal transportation problem to achieve maximum revenue is solved through the traditional set-packing model that includes all feasible schedules for each carrier. In the second stage, the robust ship scheduling problem is formulated as mentioned in the quadratic programming. Single index model is used to efficiently calculate the variance-covariance matrix of objective function. Significant results are reported to validate that the proposed model can be utilized in the decision problem of ship scheduling after considering robustness and the required level of profit.

• 한국동물생명공학회지
• /
• 제37권4호
• /
• pp.226-230
• /
• 2022

The sheep can be reproduced by natural mating as well as applied reproductive biotechnology, embryo transfer (ET). However, this method in sheep is influenced by several factors such as season, photoperiod, latitude, temperature, nutrition, and breed. In addition, there is still less research on assisted reproductive technologies in small ruminants, compared to other livestock species such as cattle and pigs. Because there has been a need for an optimization and a continuous improvement of ET techniques in small ruminants. the main objective of this study was to evaluate the conception rate obtained after ET in Mongolian sheep (Dorper breed). After embryo recover, code 1 and 2 embryos (morula or blastocyst stage) for ET in the present study were 63% (63/100) and 24% (24/100), respectively. Then Each single embryo was transferred to a synchronized recipient who prepared by estrous synchronization protocol with fluorogestone acetate-cloprostenol sodium. The results demonstrated that an average conception rate and lambing rate was 35.6% (31/87) and 33.3% (29/87), respectively. Further study is still necessary, but these results indicated that single embryo of Mongolian sheep with the present protocol was enough to conducting ET when the genetically superior sheep were necessary to be expanded.

• Journal of applied mathematics & informatics
• /
• 제25권1_2호
• /
• pp.217-229
• /
• 2007

In this paper, Genetic Algorithm (GA) is used to find the Maximum Weight Independent Set (MWIS) of a graph. First, MWIS problem is formulated as a 0-1 integer programming optimization problem with linear objective function and a single quadratic constraint. Then GA is implemented with the help of this formulation. Since GA is a heuristic search method, exact solution is not reached in every run. Though the suboptimal solution obtained is very near to the exact one. Computational result comprising an average performance is also presented here.

• 품질경영학회지
• /
• 제28권1호
• /
• pp.78-94
• /
• 2000

The ever increasing demands for enhanced competitiveness of engineered products require a "designing-in-quality" strategy that can effectively and efficiently incorporate concepts of uncertainty, quality, and robustness into design. Engineered design optimization approaches that are typically carried out with respect to a single objective become inadequate to address these multiple set of requirements. This paper presents a design metric for a multi-attribute robust design problem with designer′s preferences on the performance accuracy and the performance precision. The use of this design metric as the robust optimal design criterion in multi-stage experimentation and modeling technique is presented. The effectiveness of the overall design procedure and the performance of the proposed design metric are tested with the aid of IC design and the results are discussed.