• 한국안광학회지
• /
• 제4권2호
• /
• pp.165-169
• /
• 1999

시료의 한 부분에 순간적으로 가열하여 시료의 특정 부분의 온도변화를 조사함으로써 시료의 열 확산도를 측정하였다. $Pb_5Ge_3O_{11}$ 단결정의 환산 열 확산도는 trigonal 구조인 $30^{\circ}C$에서는 $0.0117cm^2/^{\circ}C$, curie point 근방인 $178^{\circ}C$에서는 $0.0105cm^2/^{\circ}C$이며 hexagonal 구조인 $180^{\circ}C$에서는 0.0112cm로 각각 나타났다. 이는 $Pb_5Ge_3O_{11}$ 단결정을 같은 열량으로 가열하였을 때, 실온에서 curie 온도쪽으로 갈 때 가열 효과가 적었으며 curie point에서 최소가 되었다가 curie 온도 이상에서는 갑자기 증가하여 일정하게 되었다. 따라서 $Pb_5Ge_3O_{11}$ 단결정의 상전이 용도가 1m 근방임을 확인하였다.

• 한국농공학회논문집
• /
• 제59권3호
• /
• pp.97-110
• /
• 2017

This study investigates the efficiencies of machine learning models, including artificial neural network (ANN), generalized regression neural network (GRNN), adaptive neuro-fuzzy inference system (ANFIS) and random forest (RF), for reservoir water level forecasting in the Chungju Dam, South Korea. The models' efficiencies are assessed based on model efficiency indices and graphical comparison. The forecasting results of the models are dependent on lead times and the combination of input variables. For lead time t = 1 day, ANFIS1 and ANN6 models yield superior forecasting results to RF6 and GRNN6 models. For lead time t = 5 days, ANN1 and RF6 models produce better forecasting results than ANFIS1 and GRNN3 models. For lead time t = 10 days, ANN3 and RF1 models perform better than ANFIS3 and GRNN3 models. It is found that ANN model yields the best performance for all lead times, in terms of model efficiency and graphical comparison. These results indicate that the optimal combination of input variables and forecasting models depending on lead times should be applied in reservoir water level forecasting, instead of the single combination of input variables and forecasting models for all lead times.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1565-1570
• /
• 2020

Photons with the energy of 60 keV are regularly used for some kinds of bone density examination devices, like the single photon absorptiometry (SPA). This article reports a flexible and lightweight rare earth/polymer composite for enhancing shielding efficiency against photon radiation with the energy of 60 keV. Lead oxide (PbO) and several rare earth element oxides (La₂O₃, Ce₂O₃, Nd₂O₃) were dispersed into natural rubber (NR) and the photon radiation shielding performance of the composites were assessed using monte carlo simulation method. For 60 keV photons, the shielding efficiency of rare earthbased composites were found to be much higher than that of the traditional lead-based composite, which has bad absorbing ability for photons with energies between 40 keV and 88 keV. In comparison with the lead oxide based composite, Nd₂O₃-NR composite with the same protection standard (the lead equivalent is 0.25 mmPb, 0.35 mmPb and 0.5 mmPb, respectively), can reduce the thickness by 35.29%, 37.5% and 38.24%, and reduce the weight by 38.91%, 40.99% and 41.69%, respectively. Thus, a flexible, lightweight and lead-free rare earth/NR composite could be designed, offering efficient photon radiation protection for the users of the single photon absorptiometry (SPA) with certain energy of 60 keV.

• 산업경영시스템학회지
• /
• 제38권4호
• /
• pp.109-116
• /
• 2015

This paper is concerned with the single vendor single buyer integrated production inventory problem. To make this problem more practical, space restriction and lead time proportional to lot size are considered. Since the space for the inventory is limited in most practical inventory system, the space restriction for the inventory of a vendor and a buyer is considered. As product's quantity to be manufactured by the vendor is increased, the lead time for the order is usually increased. Therefore, lead time for the product is proportional to the order quantity by the buyer. Demand is assumed to be stochastic and the continuous review inventory policy is used by the buyer. If the buyer places an order, then the vendor will start to manufacture products and the products will be transferred to the buyer with equal shipments many times. The mathematical formulation with space restriction for the inventory of a vendor and a buyer is suggested in this paper. This problem is constrained nonlinear integer programming problem. Order quantity, reorder points for the buyer, and the number of shipments are required to be determined. A Lagrangian relaxation approach, a popular solution method for constrained problem, is developed to find lower bound of this problem. Since a Lagrangian relaxation approach cannot guarantee the feasible solution, the solution method based on the Lagrangian relaxation approach is proposed to provide with a good feasible solution. Total costs by the proposed method are pretty close to those by the Lagrangian relaxation approach. Sensitivity analysis for space restriction for the vendor and the buyer is done to figure out the relationships between parameters.

• 한국융합학회논문지
• /
• 제12권1호
• /
• pp.105-110
• /
• 2021

의료기관에서 최근 많이 사용되고 있는 친환경 소재 방사선 차폐체는 시트 형태로 제작되어 Apron의 재료로 활용되고 있다. 친환경 Apron의 차폐성능은 납당량을 기준으로 제시되고 있으며, 납당량은 0.25~0.50mmPb로 제시되고 있다. 납이 주재료 사용되는 차폐체인 경우 납의 우수한 가공성으로 인해 두께로 차폐성능을 조절할 수 있다. 그러나 친환경 차폐시트는 차폐재료의 함량, 베이스 재료인 고분자 물질의 물성, 공정과정의 기술적 차이에 따라 차폐성능이 변화되어 두께 기준의 차폐성능을 제어하기가 어렵다. 본 연구에서는 이러한 문제점을 해결하고자 두께를 기준으로 차폐시트를 제작하여 차폐성능을 평가, 비교하였다. 동일한 시트 제작공정을 제시하여 두께를 제어할 수 있는 캘린더 공정의 압연 기술을 적용하였고 여러층의 적층 구조와 단일 구조로 제작된 두 시트의 두께별 차폐성능을 비교하여 5%대의 차이를 관찰하였다. 그 결과 여러 층으로 차폐한 적층 구조 차폐시트가 더 효과적임을 증명하는 동시에 두께 중심의 차폐성능의 가능성을 제시하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1908-1916
• /
• 2018

This paper proposes a controller design method for suppressing the resonance generated in the slave motor in the middle and low speed operation range, according to the load and parameter differences between two motors, during parallel operation using the master and slave method that controls two surface permanent magnet synchronous motors connected in parallel by a single inverter. The proposed resonance suppression controller is directly obtained by analyzing the resonance characteristics, using the lead controller method. Therefore, it is possible to fundamentally reduce trial and error to set the controller gain. In addition, because the proposed resonance suppression controller was designed as a lead controller, the stability region of the system increased owing to the added zero point, making the system robust with respect to parametric variations. Simulations and experiments confirmed the usefulness of the proposed method and the system's robustness with respect to parametric variations.

• Journal of Communications and Networks
• /
• 제13권2호
• /
• pp.113-124
• /
• 2011

Electrocardiography (ECG) is a widely accepted approach for monitoring of cardiac activity and clinical diagnosis of heart diseases. Since cardiologists have been well-trained to accept 12-lead ECG information, a huge number of ECG systems are using such number of electrodes and placement configuration to facilitate fast interpretation. Our goal is to design a wireless ECG system which renders conventional 12-lead ECG information.We propose the three-pad ECG system (W3ECG). W3ECG furthers the pad design idea of the single-pad approach. Signals obtained from these three pads, plus their placement information, make it possible to synthesize conventional 12-lead ECG signals.We provide one example of pad placement and evaluate its performance by examining ECG data of four patients available from online database. Feasibility test of our selected pad placement positions show comparable results with respect to the EASI lead system. Experimental results also exhibit high correlations between synthesized and directly observed 12-lead signals (9 out of 12 cross-correlation coefficients higher than 0.75).

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.462-469
• /
• 2018

The background spectrum of a $3^{{\prime}{\prime}}{\times}3^{{\prime}{\prime}}$ NaI(Tl) well-type scintillation SILENA detector was measured without shielding, in 6 cm thick lead shielding, and with 2 mm thick electrolytic copper covering the detector inside the lead shielding. The relative remaining background of the lead shield lined with copper was found to be ideal for low-level environmental radioactive spectroscopy. The background total count rate in the (20-2160 KeV) was reduced 28.7 times by the lead and 29 times by the Cu + Pb shielding. The effective reduction of background (1.04) by the copper mainly appeared in the energy range from X-ray up to 500 KeV, while for the total energy range the ratio is 1.01 relative to the lead only. In addition, a strong relation between the full-energy peak absolute efficiency and the detector well height was found using gamma-ray isotropic radiation point sources placed inside the detector well. The full-energy peak efficiency at a midpoint of the well (at 2.5 cm) is three times greater than that on the detector surface. The energy calibrations and the resolution of any single energy line are independent of the locations of the gamma source inside or outside of the well.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.802-804
• /
• 2002

An analysis of the skeleton type BLDC motor is presented. The single phase skeleton type BLDC motor consists of the stator, rotor with the permanent magnet, and drive circuit with hall sensors that detect the rotor position. The major factors for the initial starting, efficiency, and torque ripples of the skeleton type BLDC motor are the detent groove of the stator and the lead angle of the phase voltage. The performance characteristics according to the angle and height of the detent groove is analyzed. The optimum lead angles of the phase voltage with the torque ripple and motor efficiency is described using the finite element method.

• 대한산업공학회지
• /
• 제17권1호
• /
• pp.51-58
• /
• 1991

This paper presents a single-echelon, single item, stochastic lead time and static demand inventory model for situations in which, during the stockout period, a fraction ${\beta}$ of the demand is backordered and the remaining fraction $(1-{\beta})$ is lost. In this situations, an objective function representing the average annual cost of inventory system is obtained by defining a time-proportional backorder cost and a fixed penalty cost per unit lost. The optimal operating policy variables minimizing the average annual cost are calculated iteratively. At the extremet ${\beta}=1$, the model presented reduces to the usual backorder case. A numerical example is solved to illustrate the algorithm developed.