• 오토저널
• /
• 제11권1호
• /
• pp.51-56
• /
• 1989

This study was performed to investigate the effect of defect on fatigue strength under the stress of rotary bending. The specimens were made of low carbon steel having artificial microholes, namely, single micro-hole and two adjacent micro-holes as natural defects, and the effects of the diameter of hole and the distance between the holes on fatigue strength have been investigated. The obtained result can be summarized as follows: 1, The critical defect means the largest size of defect that does not affect fatigue limit, and correspondes to the size of defect leading to final fracture under fatigue limit of smooth specimen. The size of defect which has an effect on fatigue limit is larger than that of critical defect. 2, The defect larger than the critical defect affects fatigue strength for as a kind of size effect, and the physical meaning of size effect of defect is considered same as the one of notch effect.

• 대한기계학회논문집
• /
• 제5권4호
• /
• pp.354-361
• /
• 1981

This study aims to compare stress concentratior factors in a loaded elastic body of the infinite plate with pressure coefficients of a fluid in the potential flow. First in view of hydrodynamics, when a single elliptic cylinder in the form of a bluff body stands in the potential flow, the pressure distribution(doefficient, C$\_$p/around the elliptic cylicder which is changed according to the position(angular displacements)is theoretically analyzed and calulated; secondly, in view of theory of elasticity, when an eliptic hole which is made on a flat plate gets tension, the stress distribution(factor) around the elliptic hole which is changed according to the position(angular displacements )is theoretically(K$\_$t/) and experimentally (K$\_$e/) measured; and finally. The results are compard and examined.

• 대한기계학회논문집B
• /
• 제32권11호
• /
• pp.878-883
• /
• 2008

The spray characteristics of a high pressure 6-hole injector were examined in a single cylinder optical direct injection spark ignition (DISI) engine. The effects of injection timing, in-cylinder charge motion, fuel injection pressure and coolant temperature were investigated using the 2-dimensional Mie scattering technique. It was confirmed that the in-cylinder charge motion played a major role in the fuel spray distribution during the induction stroke while the propagation of fuel spray was restrained during the compression stroke by the increasing pressure and the upward moving piston. In additions, it was confirmed that the liquid fuel droplets existing at the sprays edges were vaporized by the increase of the coolant temperature.

• 식물병연구
• /
• 제6권1호
• /
• pp.10-14
• /
• 2000

1998년 나주와 밀양에서 재배중인 복숭아와 자두에서 세균성 구멍병이 발생하였다. 복숭아와 자두의 병반으루부터 분리한 균주의 세균학적 특성을 조사한 결과, 병원세균 중 2균주는 Xanthomonas campestris pv. pruni로, 3균주는 Erwinia nigrifluens로 동정되었다. E. nigrifluens는 국내에서는 복숭아와 자두의 세균성 구멍병으루 처음 분리되었다. 이 균주는 X. campestris pv. pruni에 의한 병징과 구분하기가 곤란하고, 2종류의 병워세균이 동시에 침입하여 발병하는 것으루 관찰되었다. 이와 같은 이유로, E. nigrifluens와 X. compestris pv. pruni에 의한 복숭아와 자두의 세균병을 각각 \"복숭아, 자두의 세균성구멍병\"로 명명할 것을 제안한다.할 것을 제안한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1136-1139
• /
• 2002

The circular cavity resonator which can measure the dielectric properties of dielectrics in the Ka-band(26.5GHz~40GHz) frequency range was designed and fabricated. A structure of the resonator is divided into two equal parts of the length and the dielectric plate sample is placed between two halves. Exciting and detecting of the resonator is performed by WR28 rectangular waveguides using Bethe's small hole coupling. The GaAs plate sample, whose permittivity is known to be 13 in millimeter wave range, was used for the verification of the performance of the fabricated circular cavity resonator. In the measurement of GaAs single crystal using that resonator, the resonant frequency of the dominant $TE_{011}$ mode, the permittivity and $Q{\times}f_0$ were measured as 26.69GHz, 12.9 and 124,000GHz, respectively.

• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.435-442
• /
• 2000

The present study is conducted to investigate the local heat/mass transfer characteristics for flow through perforated plates. A naphthalene sublimation method is employed to determine the local heat/mass transfer coefficients on the effusion plate. Two parallel perforated plates are arranged for the two different ways: staggered and shifted in one direction. The experiments are conducted for hole pitch-to-diameter ratios of 6.0, for gap distance between the perforated plates of 0.33 to 10 hole diameters, and for Reynolds numbers of 5,000 to 12,000. The result shows that the high transfer region is formed at stagnation region and at the mid-line of the adjacent impinging jets due to secondary vortices and flow acceleration to the effusion hole. For flows through the perforated plates, the mass transfer rates on the surface of the effusion plate are about six to ten times higher than for effusion cooling alone (single perforated plate). More uniform and higher heat/mass transfer characteristic is obtained in overall region with small gap between two perforated plates.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.176-176
• /
• 2012

다수 홀 전극을 이용한 RF Capcitively Coupled Plasma는, 평판 전극을 이용할 때에 비해, 전자 밀도를 향상시키는 것으로 알려져 있다. 이와 같은 전자 밀도의 증가는 일반적으로 공정의 속도를 증가시키며, 박막 태양전지의 Microcrystalline Silicon 증착 공정등 공정의 속도가 중요시되는 공정에서는 공정속도를 향상 시키는 것이 중요한 공정의 요구사항으로, 이와 같은 방법으로 전자 밀도를 향상시켜 공정의 속도를 향상시키는 연구가 진행되어 왔다. 그러나 공정에 사용하는 RF 전력의 파장의 유한성으로 인해, 공정의 면적을 증가시킬 경우, 방전의 균일도가 하락하게 되며 넓은 면적에 일정한 공정이 이루어지지 않게 되어 공정의 품질이 하락하게 된다. 이러한 문제에 대한 해결책의 하나로 본 발표에서는 다중 Multi-hole 전극을 이용한 방전을 제시하고자 한다. 다중 Multi-hole 전극은, 복수의 구획으로 나뉘어진 다수의 홀이 있는 전극으로 각각의 구획은 분리되어, 각 구획 별로 서로 다른 복수의 홀이 10 mm 깊이로 뚫린 전극 구획으로 나누어지며, 각 구획을 결합하여 하나의 전극을 이루도록 한 전극이며 이를 이용하여 위치 별 플라즈마 밀도를 제어하고자 하는 목적으로 설계되어진 전극 구조이다. 본 학회에서 발표하는 실험에서는 가장 단순한 형태인, 두 개의 구획으로 나뉘어진 전극을 이용하여 내부와 외부에, 평 전극 구획 혹은 5 mm 지름의 다수 홀이 존재하는 전극 구획을 조합하여 다양한 전극 구조를 만들었으며 이를 통해, 다중 Multi-hole 전극을 이용하는 위치 별 플라즈마 밀도의 제어 방법의 가능성을 확인하고자 하였다. 위치 별 플라즈마 밀도의 측정을 위해, 전극에 대해 수평하게 이동하는 RF compensated Single Langmuir Probe를 이용하여, 전자 밀도를 측정하였으며 50 mTorr의 낮은 압력 범위 및 500 mTorr의 높은 압력 범위에서 위치 별 플라즈마 밀도를 측정하여, 압력에 따라 달라지는 홀 방전의 특성을 이용하고자 하였다.

• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1085-1089
• /
• 2002

The circular cavity resonator which can measure the dielectric properties of dielectrics in the Ka-band(26.5GHz∼400Hz) frequency range was designed and fabricated. A structure of the resonator is divided into two equal parts of the length and the dielectric plate sample is placed between two halves. Exciting and detecting of the resonator is Performed by WR28 rectangular waveguides using Bethe's small hole coupling. The GaAs plate sample, whose performance is known to be 13 in millimeter wave range, was used for the verification of the performance of the fabricated circular cavity resonator In the measurement of GaAs single crystal using that resonator, the resonant frequency of the dominant TE$\sub$011/ mode, the permittivity and Q${\times}$f$\sub$0/ were measured as 26.69GHz, 12.9 and 124,000GHz, respectively.

• 천문학회보
• /
• 제41권1호
• /
• pp.70.4-71
• /
• 2016

The links between super-massive black hole masses and their host galaxy properties are observed, indicating that black hole growth and host galaxy evolution are closely related. Reverberation mapping, which uses the time delay from the central black hole to broad line regions, is one of the best methods to estimate masses of black holes of active galactic nuclei (AGNs). However, only masses of about 50 black holes have been determined in reverberation mapping studies so far, and most of them are limited to optical luminosities below 10^45 erg/s due to the challenges of long-term time domain observations in both photometry and spectroscopy. In this project, we expand reverberation mapping samples to higher luminosities of > 10^44.5 erg/s at 0.1 < z < 0.35, that have expected time lags of 40 - 250 light days. Photometric (using LOAO 1-m and MDM 1.3-m) and spectroscopic (using MDM 2.4-m and Lick 3-m) monitoring campaigns are being conducted for a 3 year duration and 20 day cadence. Precedent photometric observations in 2015B show some targets with variability and follow-up spectroscopic observations are on-going. In this presentation, we introduce our project, present reverberation mapping simulation results, and preliminary results on photometry. These reverberation mapping masses of relatively high luminous AGNs will provide a strong constraint on black hole mass calibration, e.g., the single-epoch mass estimation.

• 터널과지하공간
• /
• 제18권4호
• /
• pp.280-288
• /
• 2008

발파진동은 암반 및 인근 구조물에 심각한 문제를 야기할 수 있기 때문에 시공 전 발파진동의 예측과 안전성 평가가 반드시 선행되어야 한다. 최근 발파진동 영향평가를 위하여 시추공이나 시험발파를 통해 획득한 실측진동파형을 이용한 동적수치해석이 증가하고 있다. 하지만 시추공 발파 진동파형은 실제 발파현장에서 측정된 진동파형과 진동수준이나 진동지속시간에서 다소 차이가 있으며 이는 단일공 파형과 유사한 특성을 가진다. 따라서 본 연구에서는 단일공 파형의 중첩모델링을 통해 발파조건 변화에 따른 진동파형을 획득하고 이 파형을 이용한 동적수치해석을 수행하였다.