• Culinary science and hospitality research
• /
• v.21 no.4
• /
• pp.16-28
• /
• 2015

The purpose of this study, as a part of developing a new french dressing, was to present the best conditions to make improved kiwi dressing, suitable for the tastes of modern people, the processing and cooking methods of different ratios of green kiwi and gold kiwi have been sought to develop a new type of dressing, then its antioxidant have been defined, and used for producing kiwi dressing. Each 150g of different Kiwi purees, made based on the most preferable combinations from the pre-test were used for kiwi dressing, and thereafter its quality characteristics, and physical properties were investigated, as well as a sensory test was conducted. The highest viscosity of kiwi dressing was test sample GD2, and in general that of combining both types of kiwis were higher than that of either single kiwi. The sugar content was decreased by changing the Gold kiwi portion(p<0.05). The chromaticity in general increased with increases in the Gold kiwi portion, and a-value(brightness) and b-value(redness) of sample GD1 were the highest by -2.75 and 17.50(p<0.05). From the acceptability test, the highest overall acceptability was the dressing sample combining Gold kiwi and Green kiwi at a ratio of 1:1. Based on the study results, it is expected that the dressing, made of kiwi puree, mixing Green kiwi and Gold kiwi by 1:1 ratio, and adding 130g of edible oil, 50g of onion, 40g of sugar, and 5g of salt, would improve the quality and overall acceptability of the dressing.

• Geotechnical Engineering
• /
• v.2 no.1
• /
• pp.27-44
• /
• 1986

The measured soil data are analyzed to the descriptive statistics and classified into the four models of uncorrelated-normal (UNNO), uncorrelated-nonnormal (VNNN), correlatedonnormal(CONN), and correlated-nonnormal(CONN) . This paper presents the comparisons of reliability index and check points using the advanced first-order second-moment method with respect to the four models as well as BASIC Program. A sin91e-mode Performance function is consisted of the basic design variables of bearing capacity and settlements on shallow foundations and input the above analyzed soil informations. The main conclusions obtained in this study are summarized as follows: 1. In the bearing capacity mode, cohesion and bearing-capacity factors by C-U test are accepted for normal and lognormal distribution, respectively, and negatively low correlated to each other. Since the reliability index of the CONN model is the lowest one of the four model, which could be recommended a reliability.based design, whereas the other model might overestimate the geotechnical conditions. 2. In the case of settlements mode, the virgin compression ratio and preccnsolidation pressure are fitted for normal and lognormal distribution, respectively. Constraining settlements to the lower ones computed by deterministic method, The CONN model is the lowest reliability of the four models.

• Progress in Medical Physics
• /
• v.7 no.1
• /
• pp.65-77
• /
• 1996

Using the 2-D and 3-D Hoffman brain phantom, 3-D Jaszczak phantom and Single Photon Emission Computed Tomography, the effects of data acquisition parameter, attenuation, noise, scatter and reconstruction algorithm on image quantitation as well as image quality were studied. For the data acquisition parameters, the images were acquired by changing the increment angle of rotation and the radius. The less increment angle of rotation resulted in superior image quality. Smaller radius from the center of rotation gave better image quality, since the resolution degraded as increasing the distance from detector to object increased. Using the flood data in Jaszczak phantom, the optimal attenuation coefficients were derived as 0.12cm$\^$-1/ for all collimators. Consequently, the all images were corrected for attenuation using the derived attenuation coefficients. It showed concave line profile without attenuation correction and flat line profile with attenuation correction in flood data obtained with jaszczak phantom. And the attenuation correction improved both image qulity and image quantitation. To study the effects of noise, the images were acquired for 1min, 2min, 5min, 10min, and 20min. The 20min image showed much better noise characteristics than 1min image indicating that increasing the counting time reduces the noise characteristics which follow the Poisson distribution. The images were also acquired using dual-energy windows, one for main photopeak and another one for scatter peak. The images were then compared with and without scatter correction. Scatter correction improved image quality so that the cold sphere and bar pattern in Jaszczak phantom were clearly visualized. Scatter correction was also applied to 3-D Hoffman brain phantom and resulted in better image quality. In conclusion, the SPECT images were significantly affected by the factors of data acquisition parameter, attenuation, noise, scatter, and reconstruction algorithm and these factors must be optimized or corrected to obtain the useful SPECT data in clinical applications.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.218-224
• /
• 2014

The small field dosimetry is very important in modern radiotherapy because it has been frequently used to treat the tumor with high dose hypo-fractionated radiotherapy or high dose single fraction stereotactic radiosurgery (SRS) with small size target. But, the dosimetry of a small field (< $3{\times}3cm^2$) has been great challenges in radiotherapy. Small field dosimetry is difficult because of (a) a lack of lateral electronic equilibrium, (b) steep dose gradients, and (c) partial blocking of the source. The objectives of this study were to measure and verify with the various detectors the output factors in a small field (<3 cm) for the 6 MV photon beams. Output factors were measured using the CC13, CC01, EDGE detector, thermoluminescence dosimeters (TLDs), and Gafchromic EBT2 films at the sizes of field such as $0.5{\times}0.5$, $1{\times}1$, $2{\times}2$, $3{\times}3$, $5{\times}5$, and $10{\times}10cm^2$. The differences in the output factors with the various detectors increased with decreasing field size. Our study demonstrates that the dosimetry for a small photon beam (< $3{\times}3cm^2$) should use CC01 or EDGE detectors with a small active volume. And also, Output factors with the EDGE detectors in a small field (< $3{\times}3cm^2$) coincided well with the Gafchromic EBT2 films.

• Sijohaknonchong
• /
• v.20
• /
• pp.113-139
• /
• 2004

This article intends to illuminate how the men. leading agents in Saseol-sijo - musical performers. writers of lyrics, patrons. composers. compilers of Sijo anthologies, audience. etc. - In the Late Choson period, viewed or recognized women and how their understanding of women was reflected in the texts. Working with texts with the theme of 'Love,' this article starts with categorizing two types of love: the first type, 'lovelorn heart' focusing on unilateral pining for a single lover who is absent now and the second type. 'physical love' concentrating on bilateral sexual intercourse. In addition to the types of love, the gender of poetic speakers, distinct from real poets is vital to characterize the discourse of love. According to these two factors. texts in question fall into four groups: texts that a female speaker displays her lovelorn heart('Type 1'), those where she speaks about her sexual experiences('Type 2'), those where a male speaker sings his lovelorn heart('Type 3'), and those where he describes his sexual experiences('Type 4'). Of these. 'Type 2' and 'Type 3' are key to understanding of the men's view of women. With respect to the configuration of the theme of 'Love,' it should be noted that in Korean literary history, the nim or a 'sweetheart' had signified the totality of value or a perfect entity which makes one's life meaningful and that 'Type 1,' the pattern that a female subject expresses her love toward male min, had constituted a traditional way to convey the theme of 'Love.' In terms of this connotation of min. a remarkable increase of 'Type 3' implying the increase of male speakers, reveals the extent to which women, the male speakers' min, accomplished their entry into a 'sacred area' -the position of mm-in which only men had occupied; females are focused and centralized. This article considers this phenomenon as an exhibition of the upgrade of women's significance and weight in the Late Choson society and as an index of 'modernity.' Meanwhile, given that most of the Saseol-sijo poets are men, the emergence of the 'Type 2' texts in which male poets have female speakers disclose their sexual experiences, demonstrates a representative example that women are degraded to be a means of men's pleasure; for this situation gives men more pleasure than when male speakers reveal their sexual experiences. Not only 'Type 2,' but texts group which basically belongs to 'Type I' and conveys the theme of 'Loyalty' through the female voice by substituting rulers-subjects relation for men-women relation, also falls under the same case. For men employ female voice as a poetic device in order to stress the theme of 'Loyalty' This article regards this phenomenon as an index of 'pre-modernity,' in the sense that in a pre-modem society, specifically in Early Choson, male-oriented value system dominates, thereby alienating women. As it is well known, the Late Choson is marked by a transitional period from a pre-modem society to a modem society. Therefore the ambivalence of the premodern and the modem can be found mixed in every segment of the society. The dual aspects of the masculine view of women in Saseol-sijo constitutes one example. The significance of the Saseol-sijo in Korean literary history can be found in this phenomenon.

• Proceedings of the Ginseng society Conference
• /
• 1978.09a
• /
• pp.149-157
• /
• 1978

Ginseng is the English common name for the species in the genus Panax. This article gives a broad botanical review including the morphological characteristics, ecological amplitude, and the ethnobotanical aspect of the genus Panax. The species of Panax are adapted for life in rich loose soil of partially shaded forest floor with the deciduous trees such as linden, oak, maple, ash, alder, birch, beech, hickory, etc. forming the canopy. Like their associated trees, all ginsengs are deciduous. They require annual climatic changes, plenty of water in summer, and a period of dormancy in winter. The plant body of ginseng consists of an underground rhizome and an aerial shoot. The rhizome has a terminal bud, prominent leafscars and a fleshy root in some species. It is perennial. The aerial shoot is herbaceous and annual. It consists of a single slender stem with a whorl of digitately compound leaves and a terminal umbel bearing fleshy red fruits after flowering. The yearly cycle of death and renascence of the aerial shoot is a natural phenomenon in ginseng. The species of Panax occur in eastern North America and eastern Asia, including the eastern portion of the Himalayan region. Such a bicentric generic distributional pattern indicates a close floristic relationship of the eastern sides of two great continental masses in the northern hemisphere. It is well documented that genera with this type of disjunct distribution are of great antiquity. Many of them have fossil remains in Tertiary deposits. In this respect, the species of Panax may be regarded as living fossils. The distribution of the species, and the center of morphological diversification are explained with maps and other illustrations. Chemical constituents confirm the conclusion derived from morphological characters that eastern Asia is the center of species concentration of Panax. In eastern North America two species occur between longitude $70^{\circ}-97^{\circ}$ Wand latitude $34^{\circ}-47^{\circ}$ N. In eastern Asia the range of the genus extends from longitude $85^{\circ}$ E in Nepal to $140^{\circ}$ E in Japan, and from latitude $22^{\circ}$ N in the hills of Tonkin of North Vietnam to $48^{\circ}$ N in eastern Siberia. The species in eastern North America all have fleshy roots, and many of the species in eastern Asia have creeping stolons with enlarged nodes or stout horizontal rhizomes as storage organs in place of fleshy roots. People living in close harmony with nature in the homeland of various species of Panax have used the stout rhizomes or the fleshy roots of different wild forms of ginseng for medicine since time immemorial. Those who live in the center morphological diversity are specific both in the application of names for the identification of species in their communication and in the use of different roots as remedies to relieve pain, to cure diseases, or to correct physiological disorders. Now, natural resources of wild plants with medicinal virtue are extremely limited. In order to meet the market demand, three species have been intensively cultivated in limited areas. These species are American ginseng (P. quinquefolius) in northeastern United States, ginseng (P. ginseng) in northeastern Asia, particularly in Korea, and Sanchi (P. wangianus) in southwestern China, especially in Yunnan. At present hybridization and selection for better quality, higher yield, and more effective chemical contents have not received due attention in ginseng culture. Proper steps in this direction should be taken immediately, so that our generation may create a richer legacy to hand down to the future. Meanwhile, all wild plants of all species in all lands should be declared as endangered taxa, and they should be protected from further uprooting so that a. fuller gene pool may be conserved for the. genus Panax.

• Journal of Korean Society of Archives and Records Management
• /
• v.10 no.2
• /
• pp.75-99
• /
• 2010

Digital resources are widely used in our modern society. However, we are facing fundamental problems to maintain and preserve digital resources over time. Several standard methods for preserving digital resources have been developed and are in use. It is widely recognized that metadata is one of the most important components for digital archiving and preservation. There are many metadata standards for archiving and preservation of digital resources, where each standard has its own feature in accordance with its primary application. This means that each schema has to be appropriately selected and tailored in accordance with a particular application. And, in some cases, those schemas are combined in a larger frame work and container metadata such as the DCMI application framework and METS. There are many metadata standards for archives of digital resources. We used the following metadata standards in this study for the feature analysis me metadata standards - AGLS Metadata which is defined to improve search of both digital resources and non-digital resources, ISAD(G) which is a commonly used standard for archives, EAD which is well used for digital archives, OAIS which defines a metadata framework for preserving digital objects, and PREMIS which is designed primarily for preservation of digital resources. In addition, we extracted attributes from the decision tree defined for digital preservation process by Digital Preservation Coalition (DPC) and compared the set of attributes with these metadata standards. This paper shows the features of these metadata standards obtained through the feature analysis based on the records lifecycle model. The features are shown in a single frame work which makes it easy to relate the tasks in the lifecycle to metadata elements of these standards. As a result of the detailed analysis of the metadata elements, we clarified the features of the standards from the viewpoint of relationships between the elements and the lifecycle stages. Mapping between metadata schemas is often required in the long-term preservation process because different schemes are used in the records lifecycle. Therefore, it is crucial to build a unified framework to enhance interoperability of these schemes. This study presents a basis for the interoperability of different metadata schemas used in digital archiving and preservation.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.61-62
• /
• 2003

Clonal propagation of high-value forest trees through somatic embryogenesis (SE) has the potential to rapidly capture the benefits of breeding or genetic engineering programs and to improve raw material uniformity and quality. A major barrier to the commercialization of this technology is the low quality of the resulting embryos. Several factors limit commercialization of SE for Corsican pine, including low initiation rates, low culture survival, culture decline causing low or no embryo production, and inability of somatic embryos to fully mature, resulting in low germination and reduced vigour of somatic seedlings. The objective was to develop a Corsican pine maturation medium that would produce cotyledonary embryos capable of germination. Treatments were arranged in a completely randomized design. Data were analyzed by analysis of variance, and significant differences between treatments determined by multiple range test at P=0.05. Corsican pine (Pinus nigra var. maritima) cultures were initiated on modified !P6 medium. Modifications of the same media were used for culture multiplication and maintenance. Embryogenic cultures were maintained on the same medium semi solidified with 2.5 g/l Gelrite. A maturation medium, capable of promoting the development of Corsican pine somatic embryos that can germinate, is a combination of iP6 modified salts, 2% maltose, 13% polyethylene glycol (PEG), 5 mg!l abscisic acid (ABA), and 2.5 g/l Gelrite. After initiation and once enough tissue developed they were grown in liquid medium. Embryogenic cell suspensions were established by adding 0.951.05 g of 10- to 14-day-old semisolid-grown embryogenic tissue to 9 ml of liquid maintenance media in a 250ml Erlenmeyer flask. Cultures were then incubated in the dark at 2022$^{\circ}$C and rotated at 120 rpm. After 2.53 months on maturation medium, somatic embryos were selected that exhibited normal embryo shape. Ten embryos were placed horizontally on 20 ml of either germination medium ($\frac{2}{1}$strength Murashige and Skoog (1962) salts with 2.5 g/l activated charcoal) or same medium with copper sulphate adjusted to 0.25 mg/1 to compensate for copper adsorption by activated carbon. 2% and 4% maltose was substituted by 7.5% and 13% PEG respectively to improve the yield of the embryos. Substitution of' maltose with PEG was clearly beneficial to embryo development. When 2% of the maltose was replaced with 7.5% PEG, many embryos developed to large bullet-shaped embryos. At latter stages of development most embryos callused and stopped development. A few short, barrel-shaped cotyledonary embryos formed that were covered by callus on the sides and base. When 4% of the maltose was removed and substituted with 13% PEG, the embryos developed further, emerging from the callus and increasing yield slightly. Microscopic examination of the cultures showed differing morphologies, varying from mostly single cells or clumps to well-formed somatic embryos that resembled early zygotic embryos only liquid cultures with organized early-stag. A procedure for converting and acclimating germinants to growth in soil and greenhouse conditions is also tested. Seedling conversion and growth were highly related to the quality of the germinant at the time of planting. Germinants with larger shoots, longer, straighter hypocotyls and longer roots performed best. When mature zygotic embryos germinate the root emerges, before or coincident with the shoot. In contrast, somatic embryos germinate in reverse sequence, with the cotyledons greening first, then shoot emergence and then, much later, if at all, the appearance of the root. Somatic seedlings, produced from the maturation medium, showed 100% survival when planted in a field setting. Somatic seedlings showed normal yearly growth relative to standard seedlings from natural seed.

• Journal of Korean Home Economics Education Association
• /
• v.21 no.1
• /
• pp.51-69
• /
• 2009

This study is intended to provide fundamental information to improve the quality of student activities presented in the Clothing & Textiles How to Dress Appropriately' section of the current middle school 'Technology Home Economics' textbooks so that Home Economics may better reflect students' interests, making it applicable in real life. The survey was conducted to 154 male and 160 female students on their preferences regarding student activities. The results are as follows. First, students who like clothing & textiles section regard "Opportunities to take part in various kinds of practices and student activities" as the major reason for preference. And the single biggest reason why they dislike the unit was due to "Too much contents to be memorized." Among various contents regarding dress in the unit, "How to Wear Clothes That Look Good on Me, and the Right Ways to Wear Them" attracted the most attention, regardless of what contents they consider necessary, interesting, or helpful in real life. Second, as for the time of implementation of the activities, students preferred "End of each class". They also preferred small-group activities (group size), well-structured problems (type of problems) and tasks that require analysis based on theoretical principles through experiments and practices (methods of implementation). Third, the findings as to the actual experience of conducting the student activities indicated that, in most cases, student activities were conducted in accordance to what was suggested in the textbooks, but not to what the students preferred. Therefore, in order to make home economics more applicable to students, it is desirable to focus on their everyday lives as is favored by the students, and increase small-group activities. Also, suggesting various and comprehensive problematic situations such as non-structured, open-ended problems and encouraging diverse implementation would be helpful in improving students' critical and creative thinking abilities.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8B
• /
• pp.691-700
• /
• 2006

Based on the destination IP address of incoming packets, the Internet routers determine next hops and forward packets toward final destinations through If address lookup. The bandwidth of communication links increases exponentially fast as well as the routing table size grows significant as the number of single host networks attached to the Internet increases. Since packets should be processed at wire-speed, the increased link speed reduces the processing time of a packet in routers, and hence more efficient and fast IP address lookup algorithms and architectures are required in the next generation routers. Most of the previous IP lookup schemes compare routing prefixes of shorter length first with a given input IP address. Since IP address lookup needs to find the most specific route of the given input, search continues until the longest matched prefix is found while it keeps remembering the current test matching prefix. In this paper, based on binary search on prefix length, we proposed a new IP address lookup algorithm which compares longer prefixes first. The proposed scheme is consisted of multiple tries with prefixes on leaves only. The trie composed of the longest prefixes is primarily searched whether there is a match with the given input. This processing is repeated for the trio of the next longer prefixes until there finds a match. Hence the proposed algorithm provides the fast search speed. The proposed algorithm also provides the incremental update of prefixes while the previous binary search on length scheme does not provide the incremental update because of pre-processing requirement. In this paper, we performed extensive simulations and showed the performance comparisons with related works.