• 산업공학
• /
• 제10권3호
• /
• pp.217-222
• /
• 1997

An economic sortie model involving N identical aircrafts attacking a single active target is developed. Using the concepts of Markovian properties, mathematical expressions for the probability of the various events associated with the sortie are obtained. The obtained results are used to derive cost related measures of effectiveness. Then, the most economic sortie time attacking the given target is computed based on maximization of the expected gain of the sortie. A numerical example is provided.

• Nuclear Engineering and Technology
• /
• 제43권1호
• /
• pp.13-18
• /
• 2011

In this study, simulations were done of a 661.6 keV line from a point source of $^{137}Cs$ housed in a lead shield. When increasing the scattering angle from 60 to 120 degrees with a 6061 aluminum alloy target placed at angles of 30 and 45 degrees to the incident beam, the spectra showed that the single scattering component increases and that the multiple scattering component decreases. The investigation of the single and multiple scattering components was carried out using a MCNP5 simulation code. The component of the single Compton scattering photons is proportional to the target electron density at the point where the scattering occurs. The single scattering peak increases according to the thickness of the target and saturates at a certain thickness. The signal-to-noise ratio was found to decrease according to the target thickness. The simulation was experimentally validated by measurements. These results will be used to determine the best conditions under which this method can be applied to testing electron densities or to assess the thickness of samples to locate defects in them.

• 한국표면공학회지
• /
• 제49권4호
• /
• pp.368-375
• /
• 2016

MoN-Cu thin films were prepared to achieve appropriate properties of high hardness and low friction coefficient, which could be applied to automobile engine parts for reducing energy consumption as well as solving wear problems. Composite thin films of MoN-Cu have been deposited by various processes using multiple targets such as Mo and Cu. However, those deposition with multiple targets revealed demerits such as difficulties in exact control of composition and homogeneous deposition. This study is aiming for suggesting an appropriate process to solve those problems. A single alloying target of Mo-Cu (10 at%) was prepared by powder metallurgy methods of mechanical alloying (MA) and spar plasma sintering (SPS). Thin film of MoN-Cu was then deposited by magnetron sputtering using the single alloying target of Mo-Cu (10 at%). Properties of the resulting MoN-Cu thin film were examined and compared to those of MoN-Cu thin films prepared with double targets of Mo and Cu.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.1994-1998
• /
• 2023

This study quantitatively evaluated the source term of a linear accelerator according to target thickness for a 6-20 MeV electron beam using MCNP6. The elements of the target were tungsten and copper, and a composite target and single target were simulated by setting different thickness parameters depending on energy. The accumulation of energy generated through interaction with the collided target was evaluated at 0.1-mm intervals, and F6 tally was used. The results indicated that less than 3% reference error was maintained according to the MCNP recommendations. At 6, 8, 10, 15, 18, and 20 MeV, the energy accumulation peaks identified for each target were 0.3 mm in tungsten, 1.3 mm in copper, 1.5 mm in copper, 0.5 mm in tungsten, 0.5 mm in tungsten, and 0.5 mm in tungsten. For 8 and 10 MeV in a single target consisting only of copper, the movement of electrons was confirmed at the end of the target, and the proportion of escaped electrons was 0.00011% and 0.00181%, respectively.

• 대한산업공학회지
• /
• 제29권2호
• /
• pp.165-171
• /
• 2003

Visual search in an unstructured search field is a fruitful research area for computational modeling. Search models that describe relationship between search time and probability of target detection have been used for prediction of human search performance and provision of ideal goals for search training. Until recently, however, most of models were focused on detecting a single target in a search field, although, in practice, a search field includes multiple targets and search models for multiple targets may differ from search models for a single target. This study proposed a random search model for multiple targets, generalizing a random search model for a single target which is the most typical search model. To test this model, human search data were collected and compared with the model. This model well predicted human performance in visual search for multiple targets. This paper also proposed how to determine optimal stopping time in multiple-target search.

• 한국전자파학회논문지
• /
• 제21권2호
• /
• pp.164-169
• /
• 2010

최근 SAR(Synthetic Aperture Radar) 영상의 거리 및 도플러 해상도가 높아짐에 따라 표적의 탐지 정확도는 향상되고 있지만 처리할 데이터 용량이 급증하고 있다. 기존의 단일 셀 기반 CFAR 검출기는 전체 영상 내에서 모든 거리 셀 데이터를 검사하여야 하므로 CFAR 검출기의 속도 성능 저하를 가져온다. 본 논문에서는 다중셀 기반 CFAR 처리 방법을 2단으로 개선하여 1단계에서는 다중 셀 평균 기반 CFAR 검출을 이용하여 예상 표적 지역을 검출하고, 2단계에서는 예상 표적 지역에 대해서만 단일 셀 기반 CFAR 검출을 수행함으로써 처리 시간을 줄이고 표적의 탐지 성능을 획기적으로 향상시켰다. 제안된 기법에 대한 성능은 실제 SAR 영상을 통하여 기존의 단일 셀 기반 방식과 다중 셀 평균 기반 검출 방식을 비교 분석하였다.

• 대한원격탐사학회지
• /
• 제26권3호
• /
• pp.297-304
• /
• 2010

Since the change in Doppler centroid according to moving targets brings alteration to the phase in azimuth differential signals of synthetic aperture radar (SAR) data, one can measure the velocity of the moving targets using this effect. In this study, we will investigate theoretically measuring the velocity of an object from azimuth differential signals by using range compressed data which is the interim outcome of treatment from the simulated SAR raw data of moving targets on the background of sea clutter. Also, it will provide evaluation for the elements that affect the estimation error of velocity from a single SAR sensor. By making RADARSAT-1 simulated image as a specific case, the research includes comparisons for the means of velocity measurement classified by the directions of movement in the four following cases. 1. A case of a single target without currents, 2. A case of a single target with tidal currents of 0.5 m/s, 1 m/s, and 3 m/s, 3. A case of two targets on a same azimuth line moving in a same direction and velocity, 4. A case of a single target contiguous to land where radar backscatter is strong. As a result, when two moving targets exist in SAR image outside the range of approximately 256 pixels, the velocity of the object can be measured with high accuracy. However, when other moving targets exist in the range of approximately 128 pixels or when the target was contiguous to the land of strong backscatter coefficient (NRCS: normalized radar cross section), the estimated velocity was in error by 10% at the maximum. This is because in the process of assuming the target's location, an error occurs due to the differential signals affected by other scatterers.

• 대한가정학회지
• /
• 제40권3호
• /
• pp.83-97
• /
• 2002

This study estimates the consumption needs of preretired households through target replacement ratio approach. Based on the Life Cycle Model, this study used the household expenditure function to derive the target replacement ratio appropriate for each household. The target replacement ratio is estimated using the 1996 National Survey of family Income and Expenditure by National Statistical Office. The estimated target replacement ratio was 82.4% for married couple households, and 85.1% for single households. Total retirement consumption needs during entire retirement period was 161,620,000 won for married couple households, and 50,532,039 won for single households.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
• /
• pp.479-482
• /
• 2004

In this article we consider a single maneuvering target Tracking algorithm in the presence of missing measurements and high clutter environments for multi-sensor target tracking problem. The tracking algorithm is based on the Particle filtering method to predict and update target states. Proposed is the AMM-PF(Auxiliary Multiple Model Particle Filter)[2] method for maneuvering target tracking to improve performance in track estimate and maintenance with a high level of uncertainty. The algorithm we propose is compared to the Extended Kalman Filter(EKF). A simulation study is included.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.137-144
• /
• 2007

함포의 사격통제장치 성능은 크게 하드웨어(H/W)적인 오차와 소프트웨어(S/W)적인 오차로 구분할 수 있으며, 이중 S/W 오차에 해당하는 표적의 위치, 속도, 가속도 등을 추정하는 추적필터 오차는 탄도계산장치의 성능에 중요한 영향을 미친다. 함포의 정확한 예상탄착점 형성과 사격시 명중률 향상을 위하여 정확한 미래위치의 표적 상태정보가 필요하다. 표적 추적필터 알고리즘은 Single Singer Model, Fixed Gain 필터 알고리즘, IMM, PBIMM등이 있다. 본 논문에서는 최근 국내 함정에 적용예정인 IMM 추적필터를 설계하였다. IMM 추적필터를 위해 CV모델, Song 모델, CTR모델을 사용하여 동역학 모델을 만들었으며, 추적성능을 Monte-Carlo 시뮬레이션을 통해 해석해 보았다.