• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.3
• /
• pp.173-179
• /
• 2022

The satellite navigation deception technology disturbs the navigation solution of the receiver by generating a deceptive signal simulating the actual satellite for the satellite navigation receiver mounted on the unmanned aerial vehicle, which is the target of deception. A single spoofing technique that creates a single deceptive position and velocity can be divided into a synchronized spoofing signal that matches the code delay, Doppler frequency, and navigation message with the real satellite and an unsynchronized spoofing signal that does not match. In order to generate a signal synchronized with a satellite signal, a very sophisticated and high precision signal generation technology is required. In addition, the current position and speed of the UAV equipped with the receiver must be accurately detected in real time. Considering the detection accuracy of the current radar technology that detects small UAVs, it is difficult to detect UAVs with an accuracy of less than one chip. In this paper, we assume the asynchrony of a single spoofing signal and propose a region defense technique using multiple spoofing signals.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.4
• /
• pp.165-172
• /
• 2016

A Global Navigation Satellite System (GNSS), which is typically exemplified by the Global Positioning System (GPS), employs a open signal structure so it is vulnerable to spoofing electronic attack using a similar malicious signal with that used in the GPS. It is necessary to require a spoofing test evaluation environment to check the risk of spoofing attack and evaluate the performance of a newly developed anti-spoofing technique against spoofing attacks. The present paper proposed a simulation method of spoofing environment based on simulator that can be implementable in a test room and analyzed the spoofing simulation performance using commercial GPS receivers. The implemented spoofing simulation system ran synchronized two GPS simulator modules in a single scenario to generate both of spoofing and GPS signals simultaneously. Because the signals are generated in radio frequency, a commercial GPS receiver can be tested using this system. Experimental test shows the availability of this system, and anti-spoofing performance of a commercial GPS receiver has been analyzed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2424-2441
• /
• 2012

In this paper, we propose a fake iris detection method that combines the optical and textural features of the human eye. To extract the optical features, we used dual Purkinje images that were generated on the anterior cornea and the posterior lens surfaces based on an analytic model of the human eye's optical structure. To extract the textural features, we measured the amount of change in a given iris pattern (based on wavelet decomposition) with regard to the direction of illumination. This method performs the following two procedures over previous researches. First, in order to obtain the optical and textural features simultaneously, we used five illuminators. Second, in order to improve fake iris detection performance, we used a SVM (Support Vector Machine) to combine the optical and textural features. Through combining the features, problems of single feature based previous works could be solved. Experimental results showed that the EER (Equal Error Rate) was 0.133%.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.580-586
• /
• 2017

The establishment of big data service environment requires both cloud-based network technology and clustering technology to improve the efficiency of information access. These cloud-based networks and clustering environments can provide variety of valuable information in real-time, which can be an intensive target of attackers attempting illegal access. In particular, attackers attempting IP spoofing can analyze information of mutual trust hosts constituting clustering, and attempt to attack directly to system existing in the cluster. Therefore, it is necessary to detect and respond to illegal attacks quickly, and it is demanded that the security policy is stronger than the security system that is constructed and operated in the existing single system. In this paper, we investigate routing pattern changes and use them as detection information to enable active correspondence and efficient information service in illegal attacks at this network environment. In addition, through the step-by -step encryption based on the routing information generated during the detection process, it is possible to manage the stable service information without frequent disconnection of the information service for resetting.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.412-414
• /
• 2005

Because a sensor node must operate on a tiny battery, the goal to eliminate energy inefficiencies leads the current researchers excavating for new techniques to advocate. As sensor networks edge closer towards wide spread deployment, security issues become a central concern. So far much research has focused on making sensor networks feasible and useful, and has not concentrated much on security issues especially computationally inexpensive techniques. In this paper we introduce a simple scheme relying on one-way hash-functions that greatly enhances location privacy by changing traceable identifiers on every read getting by with only a single, unreliable message exchange. Thereby the scheme is safe from many threats like eavesdropping, message interception, spoofing, and replay attacks.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.5
• /
• pp.47-55
• /
• 2019

As the damage caused by GPS jamming has been increased, researches for detecting and preventing GPS jamming is being actively studied. This paper deals with a GPS jamming detection method using multiple GPS receiving channels and three-types machine learning techniques. Proposed multiple GPS channels consist of commercial GPS receiver with no anti-jamming function, receiver with just anti-noise jamming function and receiver with anti-noise and anti-spoofing jamming function. This system enables user to identify the characteristics of the jamming signals by comparing the coordinates received at each receiver. In this paper, The five types of jamming signals with different signal characteristics were entered to the system and three kinds of machine learning methods(AB: Adaptive Boosting, SVM: Support Vector Machine, DT: Decision Tree) were applied to perform jamming detection test. The results showed that the DT technique has the best performance with a detection rate of 96.9% when the single machine learning technique was applied. And it is confirmed that DT technique is more effective for GPS jamming detection than the binary classifier techniques because it has low ambiguity and simple hardware. It was also confirmed that SVM could be used only if additional solutions to ambiguity problem are applied.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.5
• /
• pp.1007-1017
• /
• 2019

Currently, most biometrics system authenticates users by using single biometric information. This method has many problems such as noise problem, sensitivity to data, spoofing, a limitation of recognition rate. One method to solve this problems is to use multi biometric information. The multi biometric authentication system performs information fusion for each biometric information to generate new information, and then uses the new information to authenticate the user. Among information fusion methods, a score-level fusion method is widely used. However, there is a problem that a normalization operation is required, and even if data is same, the recognition rate varies depending on the normalization method. A rank-level fusion method that does not require normalization is proposed. However, a existing rank-level fusion methods have lower recognition rate than score-level fusion methods. To solve this problem, we propose a rank-level fusion method with higher recognition rate than a score-level fusion method using correlation coefficient. The experiment compares recognition rate of a existing rank-level fusion methods with the recognition rate of proposed method using iris information(CASIA V3) and face information(FERET V1). We also compare with score-level fusion methods. As a result, the recognition rate improve from about 0.3% to 3.3%.