• 대한의용생체공학회:의공학회지
• /
• 제41권1호
• /
• pp.8-13
• /
• 2020

To develop cardiovascular simulator capable of implementing pulse waves similar to the human body, accurate information about reflection wave is required. However, the conclusion is still not clear and various discussions are underway. In this study, the pulse wave velocity of the tube used in the experiment was first determined by measuring the pressure waves at two points in a single tube system with the experimental device to implement the pulse wave transmission of blood vessels, and the superposition time and characteristics of the reflection wave were confirmed. After that, an air chamber was set at the reflection site, and the effect of the change of air volume on the reflection wave was investigated. Finally, the effect of the number of branches connected to a single tube on the reflection wave was investigated. The superposition time of the reflection wave can be controlled by the air volume of the air chamber, and the magnitude of the reflection wave is influenced by the number of reflection sites that generate the reflection wave. The results of this study may be of practical assistance to simulator researchers who want to implement pulse wave similar to clinical data. It is expected that the more results similar to clinical are provided, the greater the scope of the simulator's contribution to clinical cardiovascular research.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.69-72
• /
• 2011

지상연소시험을 통해 이중펄스모타 성능을 입증하였다. 이중펄스를 구현하기위해 고체로켓모타 내부에 격벽형 펄스분리장치와 독립적인 점화기를 설치하였다. 주요 개발목표는 세부분으로 나뉘어진다. 첫째, 이중펄스 추진기관의 총역적은 동일형상 및 무게를 갖는 고체로켓모타에 비해 총역적이 90% 이상이어야 한다. 둘째, 1단 펄스 종료 후 1 ~ 60초 중 임의의 시간 후 2단 펄스를 점화시킬 수 있어야 한다. 마지막으로, 펄스분리장치는 1단 펄스 작동압력에서 견디며 2단 작동압력의 30% 이하에서 파열되어야 한다. 지상연소시험 결과 이러한 개발목표를 달성하는 것을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제24권3호
• /
• pp.279-284
• /
• 2003

The One Pass Method (OPM) previously presented for the identification of single input single output systems is used to estimate the parameters of a Decentralized Control System (DCS). The OPM is a linear and therefore a simple estimation method. All of the calculations are performed in one pass, and no initial parameter guess, iteration, or powerful search methods are required. These features are of interest especially when the parameters of multi input-output model are estimated. The benefits of the OPM are revealed by comparing its results against those of two recently published methods based on pulse testing. The comparison is performed using two databases from the literature. These databases include single and multi input-output process transfer functions and relevant disturbances. The closed loop responses of these processes are roughly captured by the previous methods, whereas the OPM gives much more accurate results. If the parameters of a DCS are estimated, the OPM yields the same results in multi or single structure implementation. This is a novel feature, which indicates that the OPM is a convenient and practice method for the parameter estimation of multivariable DCSs.

• 정보처리학회논문지C
• /
• 제11C권3호
• /
• pp.395-400
• /
• 2004

본 논문에서는 급증되는 무선통신 서비스의 요구에 맞추어 제안된 UWB 시스템 중 반송파를 사용하지 않은 단일 밴드 UWB 시스템용 임펄스를 제안하였다. 기존의 UWB 시스템의 펄스로 제안된 펄스들의 특성과 문제점을 분석하였고, 이를 토대로 펄스폭의 감쇄기술 없이 초광대역의 신호를 발생시키는 TDMG(Time Delay Multiple Gaussian) 펄스를 제안하였다. 제안한 펄스를 수학적으로 전개하였고, 이를 바탕으로 단일밴드 UWB 시스템용 TDMG 펄스 발생기의 하드웨어 구조를 모델링 하였다. 제안한 TDMG 펄스는 컴퓨터 모와 실험을 통해 기존에 제안되었던 펄스의 성능과 비교하였다. 그 결과 기존의 펄스보다 TDMG 펄스가 중심주파수는 약 1GHz이상 높은 대역으로 이동하였고, l0dB fractional bandwidth는 약 1GHz 이상 넓어졌다. 또 n차로 미분한 경우에도 TDMG 펄스의 중심주파수가 각각 1GHz정도 높은 대역으로 이동하였고, 10dB fractional bandwidth도 각각 1GHz 이상 넓어졌다. 즉 기존에 제안된 펄스보다 TDMG 펄스가 주파수 특성도 우수하고, FCC가 권고한 주파수 대역과 스펙트럼 특성을 만족함으로서 다른 이동 무선 통신시스템과의 간섭이 감소한 것을 확인할 수 있었다.

• Korean Journal of Acupuncture
• /
• 제29권2호
• /
• pp.200-215
• /
• 2012

Objectives : The purpose of this study is to investigate the differences of pulse wave parameter between the non delivery group (single women with no childbirth experience) and the delivery group (married women who gave birth(s) in delivery). Methods : Sixty one healthy (non delivery) nulliparous women and fifty three delivery women participated in this study. We used 3 dimensional pulse analyser(3D MAC, DAEYOMEDI co., Korea), which measures radial pulse waveform non-invasively by way of tonometry method at 5 different applied pressure levels. From 114 subjects enrolled, pulse wave parameters were measured on the six locations of Chon, Kwan and Cheok of each hands. Results : Delivery group's pulse showed larger values in the following pulse wave parameters (Energy, Ap, RAI, As, Aw, h1, h2, h4, h4/h1, t, t1, t2, t4, Wm, Wm/t). Non delivery group's pulse indicated larger values in the pulse wave parameters such as Energy of left Chon, difference pulse energy between left and right hand, Ad, h5, h5/h1, t5. Conclusions : According to the analysis result, delivery group's pulse has bigger values in most part of pulse wave parameters, especially in Kwan and Cheok which correspond to Liver, Kidney, and Myeong-mun. We interpret these results that delivery women are more mature and stable in reproductive organs than non delivery group, as they have experienced delivery(deliveries) and child-caring through married life.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.133-137
• /
• 2010

하나의 고체 추진기관에서 이중펄스 추력을 발생시키는 기술은 기존의 일회성 추력발생 방식에 비하여 여러 가지 장점이 있다. 추진기관에 펄스분리장치를 적용하면 적절한 추력배분을 통하여 유도탄의 사거리 연장 및 종말속도를 향상시킨다. 본 연구에서는 격벽형 펄스분리장치의 성능을 검증하기 위하여 소형 추진기관을 설계, 제작하여 지상연소시험을 수행하였다. 이를 통하여 펄스분리장치의 파열특성, 구조적 안전성 및 내열특성 등을 확인하였으며 향후 실물형 이중펄스 추진기관 설계 시 필요한 데이터 등을 확보하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.245-248
• /
• 2011

다중펄스 로켓모타 기술은 일회성 추력발생 방식에 비하여 여러 가지 장점이 있다. 추진기관에 펄스분리장치를 적용하면 적절한 추력배분을 통하여 유도탄의 사거리 연장 및 종말속도를 향상시킨다. 본 연구에서는 격벽형 펄스분리장치의 성능을 검증하기 위하여 실물형 Heavy-type 추진기관을 설계, 제작하여 지상연소시험을 수행하였다. 지상연소시험 시 계측한 추진기관의 압력, 추력, 진동 결과를 바탕으로 펄스분리장치의 파열특성인 파열시간과 파열압력 분석을 실시하였다. 그 결과, 2단 연소압력의 30% 이하에서 파열되어야 한다는 요구조건을 만족함을 확인할 수 있었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.442-443
• /
• 2011

In this paper, a voltage control method based on DQ transformation and Space Vector Pulse Width Modulation (SVPWM) for a single phase three-level converter is proposed. This control method is designed to use DC values instead of using instantaneous values of current which are usually used in single-phase application, so that it results in a fast and robust voltage control response. Simulation results demonstrate the validity of the control strategies.

• 전력전자학회논문지
• /
• 제27권6호
• /
• pp.526-534
• /
• 2022

The modular multilevel converter (MMC) has been widely applied to various industrial areas because of its various advantages and structural characteristics. Therefore, many methods for synthesizing the output voltage of MMC have been studied. Among these methods, phase-shifted pulse width modulation (PSPWM) is frequently used in MMC systems because it has diverse merits, such as excellent output qualities even with a small number of cells and uniform power distribution among cells. In this study, the total harmonic distortion (THD) of the output voltage is analyzed in accordance with the number of cells in one arm of a single-delta bridge cell MMC in order to compare PSPWM methods in terms of the THD of the output voltage. The physical characteristics of the triangle and sawtooth carrier waves used for the PSPWM and the mathematical modeling of output voltage are introduced. Then, the obtained results are verified through real-time simulation of a 1 MW single-delta bridge cell MMC system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.484-488
• /
• 2001

The grid voltage of commercial utility power source hi Japan and USA is 100rms, but in China and European countries, it is 200rms. In recent years, In Japan 200Vrms out putted single phase three wire system begins to be used for high power applications. In 100Vrms utility AC power applications and systems, an active voltage clamped quasi-resonant Inverter circuit topology using IGBTs has been effectively used so far for the consumer microwave oven. In this paper, presented is a half bridge type voltage-clamped high-frequency Inverter type AC-DC converter using which is designed for consumer magnetron drive used as the consumer microwave oven in 200V utility AC power system. This zero voltage soft switching Inverter can use the same power rated switching semiconductor devices and three-winding high frequency transformer as those of the active voltage clamped quasi-resonant Inverter using the IGBTs that has already been used for 100V utility AC power source. The operating performances of the voltage source single ended push pull type Inverter are evaluated and discussed for consumer microwave oven. The harmonic line current components In the utility AC power side of the AC-DC power converter operating at ZVS­PWM strategy reduced and improved on the basis of sine wave like pulse frequency modulation and sine wave like pulse width modulation for the utility AC voltage source.