• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1477-1479
• /
• 2004

Increasing numbers of photovoltaic arrays are being connected to the power utility through the power conditioning systems (PCS). This has raised potential problems of network protection. If, due to the action of the PCS, the local network voltage and frequency remain within regulatory limits when the utility is disconnected, then islanding is said to occur. In this paper, the representative methods to prevent the islanding are described and a PSIM-based model and analysis of the reactive power variation (RPV) method are presented. A novel phase detector using the all-pass filter and digital phase locked loop (DPLL) is proposed especially for the single-phase PCS. Finally, this paper provides the simulation and experimental results with a single-phase 3kW prototype PCS. Islanding test method of IEEE Std. 929-2000 was performed for verification.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.58.4-59
• /
• 2015

We have performed single dish and VLBI monitoring observations of $H_2O$ and SiO masers toward the semi-regular variable star R Crateris using the Korean VLBI Network(KVN) 4 band receiving system. In the case of VLBI observations at 3 epochs, successful superposed maps of $H_2O$ and SiO masers were obtained on 2015 May by adopting the Source Frequency Phase Referencing(SFPR) method. These results enable us to investigate the development of outflow and asymmetric motions from SiO maser to $H_2O$ maser regions according to stellar pulsation which are closely related with a mass-loss process. Single dish monitoring observations were carried out from 2009 June to 2015 May. Intensity variations between $H_2O$ and SiO masers were investigated according to stellar phases together with peak velocity variations. We will compare the VLBI results with those of single dish.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.45-52
• /
• 2005

This paper presents the characterization of through hole vias on printed circuit board (PCB) through the time domain and frequency domain measurements. The time domain measurement was performed on a single via using the TDR, and the model parameters were extracted by the fitting simulation using HSPICE. The frequency domain measurement was also performed by using 2 port VNA, and the model parameters were extracted by fitting simulation with ADS. Using the ABCD matrices, the do-embedding equations were derived probing in the same plane in the VNA measurement. Based on the single via characterization, the differential via characterization was also performed by using TDR measurements. The time domain measurements were performed by using the odd mode and even mode sources in TDR module, and the Parameter values were extracted by fitting with HSPICE. Comparing measurements with simulations, the maximum calculated differences were $14\%$ for single vias and $17\%$ for differential vias.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.2972-2991
• /
• 2016

WLAN is the best choice in the place where complex network is hard to set up. Intelligent terminals are more and more assembled in some areas now. However, according to IEEE 802.11n/802.11ac, the access-point (AP) can only serve one user at a single frequency channel. The spectrum efficiency urgently needs to be improved. In theory, AP with multi-antenna can serve multiple users if these users do not interfere with each other. In this paper, we propose a user clustering scheme that could achieve multi-user selection through the mutual cooperation among users. We focus on two points, one is to achieve multi-user communication with multiple antennas technique at a single frequency channel, and the other one is to use a way of distributed users' collaboration to determine the multi-user selection for user clustering. Firstly, we use the CSMA/CA protocol to select the first user, and then we set this user as a source node using users' cooperation to search other proper users. With the help of the users' broadcast cooperation, we can search and select other appropriate user (while the number of access users is limited by the number of antennas in AP) to access AP with the first user simultaneously. In the network node searching, we propose a maximum degree energy routing searching algorithm, which uses the shortest time and traverses as many users as possible. We carried out the necessary analysis and simulation to prove the feasibility of the scheme. We hope this work may provide a new idea for the solution of the multiple access problem.

• Journal of Broadcast Engineering
• /
• v.14 no.3
• /
• pp.311-321
• /
• 2009

In a single frequency network (SFN) for Advanced Television Systems Committee (ATSC) terrestrial digital television (DTV) system, the interference due to the use of same frequency among multiple transmitters or repeaters is inevitable for receivers. This problem can be solved by adjusting transmit power and time of each transmitter and repeater. To adjust SFNs, the ATSC recommended practice (RP) introduces a transmitter identification (TxID) signal which is embedded in a signal from each transmitter or repeater. This paper proposes an efficient method to estimate the individual reception power from each transmitter or repeater based on the channel profile of SFN and the total reception power. Moreover, field test results are provided to evaluate the performance of the proposed method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1181-1188
• /
• 2007

This paper presents the measured signal performances in the urban environment for the DVB-H parameters such as code rate, burst size, FFT mode and modulation technique to analyze the DVB-H signal performance avaible for the embodiment of single frequency network to improve the frequency efficiency. Measurements were performed for the case for applying and non-applying MPE-FEC technique simultaneously. Results show that the most outstanding performance are found in the case of QPSK modulation, 1/2 code rate, 2 k FFT mode and 512 burst size. In addition, the signal performance by the SFN with 1/8 guard interval becomes superiour in comparision with the measured data from each site and the data from SFN with 1/32 guard interval. The analysis of the results can be instructive for the improvement of the signal performance and broadcasting quality for the terrestrial digital mobile broadcasting service.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.64-72
• /
• 2011

In a Single Frequency Network (SFN) for Advanced Television Systems Committee (ATSC) terrestrial digital television (DTV) system, the interferences induced by the multiple transmitters and/or repeaters using same frequency are unavoidable. To ease the interference handing in the SFN for ATSC DTV system, transmitter identification (TxID) signal is recommended in the ATSC terrestrial DTV system. The TxID signal is embedded in the ATSC DTV signal and transmitted from each transmitter and repeater within the SFN and in ATSC recommended practice (RP) A/111, Kasami sequence is recommended as the TxID signal. In this paper, we propose an additional data transmission scheme using the TxID signal. In the proposed scheme, the Kasami sequence not only acts as the conventional TxID of the SFN for ATSC terrestrial DTV system but also carriers the additional data bits on its polarity and the code phase.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.456-461
• /
• 2022

In this paper, a two-stage single-ended power amplifier (PA) with broadband gain characteristics was presented by utilizing a radio frequency (RF) transformer (TF), which is essential for a differential amplifier. The bandwidth of a PA can be improved by designing TF to have broadband characteristics and then applying it to the inter-stage matching network (IMN) of a PA. For broadband gain characteristics while maintaining the performance and area of the existing PA, an IMN was implemented on an monolithic microwave integrated circuit (MMIC) and a multi-layer printed circuit board (PCB), and the simulation results were compared. As a result of simulating the PA module designed using InGaP/GaAs HBT model, it has been confirmed that the PA employing the proposed design method has an improved fractional bandwidth of 19.8% at a center frequency of 3.3GHz, while the conventional PA showed that of 11.2%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.11
• /
• pp.3935-3949
• /
• 2021

With the rapid development of Internet and big data technology, various online social network platforms have been established, producing massive information every day. Hot topic discovery aims to dig out meaningful content that users commonly concern about from the massive information on the Internet. Most of the existing hot topic discovery methods focus on a single network data source, and can hardly grasp hot spots as a whole, nor meet the challenges of text sparsity and topic hotness evaluation in cross-network scenarios. This paper proposes a novel hot topic discovery method across social network based on an im-proved LDA model, which first integrates the text information from multiple social network platforms into a unified data set, then obtains the potential topic distribution in the text through the improved LDA model. Finally, it adopts a heat evaluation method based on the word frequency of topic label words to take the latent topic with the highest heat value as a hot topic. This paper obtains data from the online social networks and constructs a cross-network topic discovery data set. The experimental results demonstrate the superiority of the proposed method compared to baseline methods.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.5
• /
• pp.227-234
• /
• 2020

In this paper, we propose wav-U-Net to improve speech enhancement in heavy noisy environments, and it has implemented three principal techniques. First, as input data, we use 128 modified Mel-scale filter banks which can reduce computational burden instead of 512 frequency bins. Mel-scale aims to mimic the non-linear human ear perception of sound by being more discriminative at lower frequencies and less discriminative at higher frequencies. Therefore, Mel-scale is the suitable feature considering both performance and computing power because our proposed network focuses on speech signals. Second, we add a simple ResNet as pre-processing that helps our proposed network make estimated speech signals clear and suppress high-frequency noises. Finally, the proposed U-Net model shows significant performance regardless of the kinds of noise. Especially, despite using a single channel, we confirmed that it can well deal with non-stationary noises whose frequency properties are dynamically changed, and it is possible to estimate speech signals from noisy speech signals even in extremely noisy environments where noises are much lauder than speech (less than SNR 0dB). The performance on our proposed wav-U-Net was improved by about 200% on SDR and 460% on NSDR compared to the conventional Jansson's wav-U-Net. Also, it was confirmed that the processing time of out wav-U-Net with 128 modified Mel-scale filter banks was about 2.7 times faster than the common wav-U-Net with 512 frequency bins as input values.