• Membrane and Water Treatment
• /
• 제11권1호
• /
• pp.79-85
• /
• 2020

A single-stage deammonification with a sequencing batch reactor (SBR) that simultaneous nitritation, anaerobic ammonia oxidation (anammox), and denitrification (SNAD) occur in one reactor has been widely applied for sidestream of wastewater treatment plant. For the stable and well-balanced SNAD, a feeding strategy of influent wastewater is one of the most important operating factors in the single-stage deammonification SBR. In this study, single-stage deammonification SBR (working volume 30L) was operated to treat a high-strength ammonium wastewater (1200 mg NH₄⁺-N/L) with different feeding strategies (single feeding and nine-step feeding) under the condition without COD. Each cycle of the step feeding involved 6 sub-cycles consisted of aerobic and anoxic periods for partial nitritation (PN) and anammox, respectively. Contrary to unstable performance in the single feeding, the step feeding showed better deammonification performance (0.565 kg-N/m³/day). Under the condition with COD, however, the nitrogen removal rate (NRR) decreased to 0.403 kg-N/m³/day when the Nine-step feeding strategies had an additional denitrification period before sub-cycles for PN and anammox. The NRR was recovered to 0.518 kg-N/m³/day by introducing an enhanced multiple-step feeding strategy. The strategy had 50 cycles consisted of feed, denitrification, PN, and anammox, instead of repeated sub-cycles for PN and anammox. The multiple-step feeding strategy without sub-cycle showed the most stable and excellent deammonification performance: high nitrogen removal efficiency (98.6%), COD removal rate (0.131 kg-COD/m³/day), and COD removal efficiency (78.8%). This seemed to be caused by that the elimination of the sub-cycles might reduce COD oxidation during aerobic condition but increase the COD utilization for denitrification period. In addition, among various sensor values, the ORP pattern appeared to be applicable to monitor and control each reaction step for deammonification in the multiple-step feeding strategy without sub-cycle. Further study to optimize the number of multiple-step feeding is still needed but these results show that the multiple-step feeding strategy can contribute to a well-balanced SNAD for deammonification when treating high-strength ammonium wastewater with COD in the single-stage deammonification SBR.

• 한국가금학회지
• /
• 제21권4호
• /
• pp.257-266
• /
• 1994

Three protein feeding systems for egg-type pullets involving conventional step-down protein 18-15-12%), step-up protein(12-15-18%) and single-stage low protein (13-13-13%) with an iso-energy level of 2,900 ME kcal /kg were compared to examine the effect on pullet growth and subsequent laying performance. During the growing period, pullets subjected to the step-up and single-stage low protein feeding systems were lighter in body weight and consumed less feed and netabolizable energy than those on the conventional step-down protein feeding system(P<0.05). 3ut the pullets on the step-up protein diet consumed more protein, and those on the single-stage low protein diet consumed less protein than those on the step-down protein diet(P<0.05). Also, he feed cost was less in pullets on the single-stage low protein diet than in those on the other systems(P<0.05). During the laying period, sexual maturity was later in hens reared on the step-up and single-stage low protein diets than in those on the step-down protein diet(P<0.05), however, average hen-day egg production and egg weight were not significantly affected by the protein feeding systems in the growing period. Daily feed intake and feed required per egg were significantly reduced in hens on the single-stage low protein diet compared to those on conventional protein feeding system(P<0.05). It was concluded that the 13% single-stage low protein feeding system produced smaller pullets with less feed, energy, protein, and feed cost during the growing period, and hens reared on that system consumed less feed during the laying period without any impairment of production compared to the conventional rearing system.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.261-264
• /
• 1997

A single action press robot, which consists of a driving unit, rotator, up-down feed base and feed bar, is developed and applied for the press automation. The driving unit is made up with a face cam and blade cam, which have a phase angle. The feeding system consists of a double speed-up apparatus and linear motion guides, and has a fast motion characteristics. A horizontal feeding speed of the feed bar is increased twice by the double speed-up apparatus. The driving mechanism could be simplified due to the speed-up of the feeding unit.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1621-1627
• /
• 2013

This paper compares power losses between voltage controlled before and after using power conversion device in AC feeding system. For this purpose we present voltage control procedures and criteria and model high speed line and train using PSCAD/EMTDC to compare power losses in various feeding condition. Power losses of the simulation result in power control before and after in single point feeding system was reduced maximum 0.37 MW(23.8 %) and average 0.23 MW(20.5 %) when one vehicle load operates maximum load condition. When three vehicles operate maximum load condition in one feeder section, power losses after voltage control was reduced 1.03 MW(49.5%) compared to before voltage control. And, power loss of parallel feeding system is reduced the average 0.08 MW(7.2 %) compared to the single feeding system. In conclusion, adaptive voltage control method using power conversion device can reduce power losses compared with existing method.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권12호
• /
• pp.1758-1762
• /
• 2001

Equal number of red jungle fowl (JF) and commercial broiler chickens (CB), raised in battery cages, were provided a single complete diet (control) or a choice of a complete diet, ground corn and ground soybean from 21 to 56 days of age. There were significant genotype ${\times}$ feeding regimen interactions for several traits measured suggesting CB and JF responded differently to the two feeding regimens. The single fed CB had better growth and feed conversion ratios (FCR) than those under choice feeding. However, the body weight and FCR of JF were not affected by feeding regimen. While the single fed and choice-fed JF consumed similar amount of protein during days 21 to 55, the protein intake of the choice-fed CB was lower than the control. From days 21 to 55, irrespective of genotype, choice-fed chicks consumed less energy than their single fed counterparts. Regardless of genotype, the trend in the proportion of each feed consumed was similar with complete diet>corn>soybean. In conclusion, while choice-fed JF were capable to select nutrient necessary for maximum growth, choice feeding was detrimental to growth and feed conversion ratio in CB.

• 환경생물
• /
• 제31권4호
• /
• pp.458-470
• /
• 2013

Haliotis discus, a useful abalone of herbivorous gastropod, shows feeding preference to marine algae depending upon their growth stage and recognition of taste. This study was carried out to investigate this abalone's algal preferences and the presence of feeding stimulants. In single-choice experiments the small (S) group generally preferred Ulva pertusa (Chlorophyta), whereas the medium (M) and large (L) group preferred both Laminaria japonica (Phaeophyta) and Undaria pinnatifida (Phaeophyta). In multi-choice experiments using 4 algal species of L. japonica, U. pertusa, U. pinnatifida and Ecklonia cava (Phaeophyta), the results were same as in the single-choice experiments; the S group preferred U. pertusa the most, while the M and L group preferred both U. pinnatifida and L. japonica. However E. cava was not preferred by any groups. In order to examine the presence of feeding stimulant, chemical compounds from algae used as feed were isolated and identified. The abalone responded to water soluble matters of L. japonica, U. pinnatifida and U. pertusa, but those of E. cava and Sargassum sagamianum (Phaeophyta) were not attractive to them. In feeding stimulant experiments using fat soluble matters, the S group preferred the fat soluble matter of U. pertusa the most, while the M group and the L group preferred those of U. pertusa and U. pinnatifida, and those of L. japonica, respectively. However the fat soluble matter of S. sagamianum was not attractive to the abalone. The results of feeding stimulant experiments were same as those of single-choice or multi-choice experiments, which showed that compound lipids in fat soluble matter might act as feeding-stimulant.

• 한국가금학회지
• /
• 제21권2호
• /
• pp.101-111
• /
• 1994

From the observations of dietary self-selection by growing pullets, step-up protein or reverse protein and single-stage low protein pullet feeding systems were developed. They offered another pullet feeding concept that appears to control the body weight effectively and to reduce the consumption of feed and nutrients without impairment of subsequent laying performance. It is obvious from the feed and nutrient consumption pattern of layers fed diets for self-selection of energy, protein and calcium that they have a daily cyclic requirement rather than a constant requirement for nutrients. It seems that a practical self-selective feeding system is needed to meet the daily cyclic requirement for nutrients without consuming an excess of energy and protein at certain times of the day as compared to the complete or single diet where layers have to consume extra energy and protein in the afternoon when they have a specific appetite mainly for calcium.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1121-1127
• /
• 2016

In this paper, modeling of overcurrent relay(OCR) to protect domestic AC electric railway Auto Transformer(AT) feeding system and operation characteristic analysis on overload condition are described. The target system of this paper is actual site where overload trip of circuit breaker occurs frequently. Because this AT feeding system is made of parallel single track which had a load(electric train) respectively, and is connected with only T phase of Scott Transformer. In addition, this system has been feeding 66kV voltage by KEPCO, not 154kV. We focus on protective coordination of Scott Transformer primary side and secondary side OCR for Korea single track AC electrical railway system in operation currently. We modeled single track AT feeding system and OCR. Also we performed faults and overload analysis for verification of OCR's setting values and system modeling. To analyze above mentioned research, we used PSCAD/EMTDC software tool.

• 전기학회논문지
• /
• 제64권12호
• /
• pp.1659-1665
• /
• 2015

In general, AT(Auto-transformer) is used to improve voltage sag and inductive interference in power lines and communication lines in AC electrical railway feeding system. Especially, Korean AT feeding system has different composition compared to other countries like Japan or France, so that it has some special characteristics. However, relays imported from other countries have been used in Korea, and settings of these relays should be modified and reflect distinct characteristics of Korean AT feeding system. Therefore, study about fault analysis based on modeled AT feeding system is important. In this paper, we modeled a single track AT feeding system by using PSCAD and analyzed fault current flow in case of trolley-rail short circuit fault. Finally, we presented current magnitude of each branch expressed by boosting current of AT.

• 한국전자파학회논문지
• /
• 제13권4호
• /
• pp.393-400
• /
• 2002

본 논문에서는 원형편파를 발생시키기 위한 여러 가지 방법 중 단일 급전 십자개구 결합 방식이 가지는 협대역의 축비 대역폭을 개선하기 위해 단일 급전으로 하이브리드 급전의 효과를 가져을 수 있는 직렬 급전 십자개구 결합 마이크로스트립 안테나를 제안하고, 기존에 발표된 단일 급전 십자개구 결합 안테나와의 축비 대역폭, 이득, 방사패턴, 그리고 임피던스 대역폭 등과 비교하여 개선된 축비 대역폭 특성을 제시하여 제안된 안테나의 타당성을 보였다. 또한 제안된 단일 안테나를 이용해 2$\times$2 배열 안테나로 확장하는 과정에서 시퀀셜 로테이션 기법을 적용함으로써 더욱 넓은 축비 대역폭을 화보할 수 있도록 하였다. 직렬급전 단일 안테나와 2$\times$2 배열 안테나의 측정된 축비 대역폭은 110 MHz(4.6 %)와 420 MHz(17.5 %)를 보였고, 측정된 임피던스 대역폭 (VSWR<1.5)은 240 MHz(10%)와 500 MHz(20.8%)출 가졌으며, 이득 측정결과에서는 단일 안테나와 2$\times$2 배열 안테나 모두 3 dB 이득 대역폭에서 400 MHz(16.7%) 이상의 평탄 특성을 가지며 최대이득에서는 8.2 ㏈i와 12.5 ㏈i의 이득특성을 보여주었다.