• Fisheries and Aquatic Sciences
• /
• v.24 no.12
• /
• pp.415-427
• /
• 2021

Wetland ecosystems act as natural freshwater purification systems, but their rich biodiversity is being threatened with the introduction of the non-native freshwater snail, Pomacea canaliculata. This study was conducted to measure the herbivory effects and growth rate of P. canaliculata on common macrophytes: Ipomoea aquatica, Ipomoea batatas, Pandanus amaryllifolius and Cucurma longa. In separate experiments, the macrophyte species were served as the snails' food as individual species and simultaneously. In the individual treatment, the growth pattern and rate were based on the snails' weight (mg/snail/day; n = 9) while the individual feeding consumption (mg/snail/day) was calculated from the leftover food. In the simultaneous treatment, the herbivory effects were evaluated as the feeding preference (%) from observations every two hours, while the total feeding consumption (mg) was calculated based on the food remaining after a 12-hour experiment (3 replicates: total n = 27). The results indicated that the growth pattern was significant for snails grazing on I. aquatica but not when other macrophyte species were eaten. The individual feeding consumption was higher when using I. aquatica than P. amaryllifolius but the growth rate for snails grazing on I. aquatica and P. amaryllifolius did not differ significantly. Meanwhile, the consumption of C. longa deterred the snails' growth rate. Although the snails consumed all the macrophytes in the individual experiment, when given the species simultaneously, the feeding preference and total feeding consumption were directed significantly more toward I. aquatica than P. amaryfollius and C. longa. We conclude that P. canaliculata is a generalist feeder given a limited choice of food but tends to show a strong feeding preference after being introduced to more food choices. These findings indicate that the introduction of P. canaliculata into wetland ecosystems may increase the herbivory effects on macrophytes, making these ecosystems vulnerable to the impact of eutrophication and biodiversity reduction.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.2
• /
• pp.185-195
• /
• 2015

Glucoamylase is an important industrial enzyme. Glucoamylase production by industrial Aspergillus niger strain featured with two major problems: (i) empirical substrate feeding methods deteriorating the fermentation performance; and (ii) the high raw materials cost limiting the economics of the glucoamylase product with delegated specification. In this study, we first proposed a novel three-stage varied-rate substrate feeding strategy for efficient glucoamylase production in a 5 L bioreactor using the standard feeding medium, by comparing the changing patterns of the important physiological parameters such as DO, OUR, RQ, etc., when using different substrate feeding strategies. With this strategy, the glucoamylase activity and productivity reached higher levels of 11,000 U/ml and 84.6 U/ml/h, respectively. The performance enhancement in this case was beneficial from the following results: DO and OUR could be controlled at the higher levels (30%, 43.83 mmol/l/h), while RQ was maintained at a stable/lower level of 0.60 simultaneously throughout the fed-batch phase. Based on this three-stage varied-rate substrate feeding strategy, we further evaluated the economics of using alternative carbon sources, attempting to reduce the raw materials cost. The results revealed that cornstarch hydrolysate could be considered as the best carbon source to replace the standard and expensive feeding medium. In this case, the production cost of the glucoamylase with delegated specification (5,000 U/ml) could be saved by more than 61% while the product quality be ensured simultaneously. The proposed strategy showed application potential in improving the economics of industrial glucoamylase production.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.803-807
• /
• 1996

In this paper, we perform a mechanism anlysis and optyimal designof the feeding system in a industrial sewing machine. Sewing machines are classified by the transfer mechanism as (1) transferred by feed dog only (2) transferred by feed dog and needle (3) transferred by feed dog, needle and pressure bar. We took the dewing machine classified as (2) which is more efficient in transferring the clothes than the machine classified as (1). In analyzing the mechanism, we divide the feeding mechanism as feed dog mechanism and needle bar mechanism. The two mechanisms are connected with each other kinematically because the clothes are transferred by needle and feed dog simultaneously and stitched by needle which pass through the feed dog in every stitchcycle. We define good stitch as coincidence of stitch between the forward and reverse motion of feeding. And we optimize feeding mechanism for that purpose. It is illustrated that stitching performance of the optimized mechanism is compared to original feeding mechanism.

• Fisheries and Aquatic Sciences
• /
• v.4 no.3
• /
• pp.130-137
• /
• 2001

In the present study, the locomotor and feeding activities of single red sea bream, Pagrus major were simultaneously investigated to examine the existence of such dual behaviour. Seven red sea bream of 13cm body length on average were placed individually in 35L tanks equipped with an infrared sensor and a newly developed demand-feeding device. Fish were exposed to a light: dark 12: 12h cycle and constant darkness (DD) to study endogenous rhythmicity. Under LD 12: 12 h, the daily pattern of behaviour differed between individual fish; some red sea bream were diurnal and others were nocturnal. Futhermore, some of them displayed an extraordinary flexibility in phasing because they were dark active but light feeding, and vice versa. Under DD, red sea bream showed free-running rhythms for locomotor activity and feeding. These results indicate that the type of phasing of locomotor activity did not necessarily decide the feeding phase; much of this is explained by the fact that red sea bream were demand-fed. Flexibility in phasing and a certain degree of independence between locomotor and feeding activities could be seen as an adaptative response of the highly adaptable circadian rhythms of fish.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.2
• /
• pp.50-56
• /
• 2007

Wire forming machine is widely used in industries to make a variety of wire products such as coil springs and links. Along with the rapid development of CNC technologies, the usage of wire forming machine varies from single-purpose machinery to universal CNC machinery. Rotating the wires while feeding them simultaneously, we can improve the performance of the machines with aspects of efficient tooling and complicated geometric forming. In this study, a new gear train is developed for the control of both feeding and rotating wires independently at the same time. The developed mechanism has many benefits as following, making more complicated geometric and precision products, easier tooling, and simpler programming.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.3
• /
• pp.161-171
• /
• 1970

1. The higher the temperature of the sea water, and the smaller the size of the oriental brown shrimp, the higher the feeding rate of the shrimp will be as long as the temperature ranges from $19^{\circ}\;to\;30^{\circ}C$, and each shrimp weighs from 1.6 to 14.9 grams. The average daily feeding rate is between 18 to 44 percent. 2. The nighttime feeding rate is always higher than the daytime feeding rate. However, the daytime feeding rate can be raised to from 22 to 37 percent of the daily feeding rate iii the non-sediment, dark or direct-sunshine-shielded conditions. Growth can thus be accelerated to that extent under such conditions. 3. When anchovy and short-necked clam meats were simultaneously used as food, a greater quantity of anchovy meat was consumed than short-necked clam meat both during the daytime and nighttime. When anchovy and short-necked clam meats were simultaneously given, the averaged daily feeding rates of anchovy and short-necked clam meats were 12.9 percent and 10.3 percent, respectively. 4. The following equation applies to the relationship between the freight of the oriental brown shrimp (W in grams) and their daily growth rate (DGR in percent): log DGR=0.7035-0.7864 log W. The daily growth rate is in inverse proportion to the size of the shrimp. 5. The efficiency of food conversion of the oriental brown shrimp fluctuates between 2.8 and 7.8 percent without extensive difference depending on the size of the shrimp. This was very small as compared with the corresponding figures so far known for fish and cuttlefish.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.10
• /
• pp.35-43
• /
• 1997

In this paper, we perform a mechanism analysis and optimal design of the feeding system in a industrial sewing machine. Sewing machines are classified by the transfer mechanism as (1) transferred by feeddog only (2) transferred by feeddog and needle (3) transferred by feeddog, needle and pressure bar. The sewing machine classified as (2) is studied which is more efficient in transferring fabrics than the machine classified as (1). In analyzing the mechanism, we divide the feeding mechanism as feeddog mechanism and needle bar mechanism. The two mechanisms are conneted with each other kinematically because fabrics are transferred by two needles and a feeddog simultaneously and stitched by two needles which pass through the feeddog in every stitch cycle. We define good stitch as coincidence of stitch between the forward and reverse motion of feeding. We optimize the feeding mechanism for that purpose. It is illustrated that stitching performance of the optimized mechanism is compared to original feeding mechanism.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.373-384
• /
• 2012

Purpose: In EU, the animal welfare regulations are strengthening. Also, in Korea, for strengthening of animal protection laws, animal welfare farm certification scheme is being prepared to enforce. To get the certification of animal welfare farm, especially for sows, individual specific feeding in sow group is necessary in accordance with the animal welfare regulation. Also, liquid feeding is reported to be more effective for farrowing as well as dry sow. Therefore, in this study, a electronic liquid sow feeder using RFID which could be fed to farrowing sow simultaneously is developed. Methods : We manufactured a prototype of appropriate elements which were evaluated in the preliminary test for selecting RFID tag, supply pump, mixing type, etc. With the prototype, the performance test for liquid feeding gilt was done in group raising training barn. Results : The performance test result shows the C.V.(coefficient of variation) of liquid mixing and feeding is 0.77~1.97% and 2.4~5.3%, respectively, which means the system could feed sows uniformly. The feeding time of pneumatically activated ball valve is 2 seconds per 0.9 kg of liquid feed. The eating time for gilt were 65 seconds in average. Conclusions : The prototype could feed sow uniformly, and deliver the liquid feed 9 times for a sow continuously. Also, total eating time for a sow was 18 minutes in one visit to the prototype of feeding station.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.897-903
• /
• 2002

In this paper, a modified feeding structure for microstrip patch antenna is suggested for improving the performances. The proposed antenna has a gap between the transmission line and the recessed part of the radiating patch which makes a capacitive coupling. It shows higher 511(-l4dB) and lower cross polarization level(-2OdB) compare with the conventional inset ftd patch antenna while having a similar characteristics in another evaluating items. Experimental results are examined and considered to apply to the S-Band application, and the effectiveness has been confirmed by FDTD simulation and measurement simultaneously.

• Korean journal of applied entomology
• /
• v.31 no.4
• /
• pp.475-479
• /
• 1992

The non-steroidal ecdysone agonist RH 5849 showed almost similar LC.o values( 18.1-26.5 ppm) at all stages of larval development of the tobacco cutworm, Spodoptera litura, when treated by a leaf-disk dipping method. The feeding-inhibition rate for the 4th instar larvae was dose-dependent, and simultaneously the weight gain of 3rd instar larvae ceased within 48 hour after feeding of the cabbage leafdisk dipped into RH 5849 4.2 ppm solution. The systemic larvicidal effect of RH 5849 was compared at cabbage and tobacco whole plant test. The $LC_{50}$ values below 20 ppm(mg/kg soil) was lasted for 15 days in cabbage, 30 days in tobacco respectively.