• Journal of Environmental Science International
• /
• v.14 no.12
• /
• pp.1093-1102
• /
• 2005

Effects of abscisic acid(ABA) and temperature on the anthocyanin accumulation and phenylalanine ammonia Iyase(PAL) activity were investigated in seedlings of Arabidopsis thaliana. In time course study, exogenous application of ABA $(50-1000\;{\mu}M)$ led to a noticeable increase in anthocyanin pigments which persisted over the following 5 days. Anthocyanins increased in concert with the chlorophyll loss. The activity of PAL, a key enzyme in the phenylpropanoid pathway, increased on exposure to ABA and reached maximum on the 4th day, This result shows that anthocyanin synthesis and PAL activity have a close physiological relationships. In the effects of temperatures ($10^{\circ}C,\;17^{\circ}C,\;25^{\circ}C$and $30^{\circ}C$) on anthocyanin accumulation and PAL activity in seedlings, a moderate-low temperatures ($17^{\circ}C$) enhanced both anthocyanin content and PAL activity, whereas elevated temperatures ($30^{\circ}C$) showed low levels of anthocyanin and PAL activity, suggesting a correlation between temperature-induced anthocyanin synthesis and the accumulation of PAL mRNA. Simultaneous application of ABA with temperatures Induced higher anthocyanin synthesis and PAL activity in seedlings than ABA or temperature stress alone. Moderate-low temperature with ABA exposure elicited the maximal induction of anthocyanin synthesis and PAL activity. Therefore, ABA treatment significantly increased thermotolerance in .A. thalinan seedlings. Ethephon and ABA showed similar mode of action in physiological effects on anthocyanin accumulation and PAL activity. Our data support that anthocyanins may be protective in preventing damage caused by environmental stresses and play an important role in the acquisition of freezing tolerance.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.277-279
• /
• 2005

Recently, due to the increase of power conversion devices and nonlinear loads with the development of information, communication and control technologies, the instantaneous minute interruption factors such as voltage & current harmonics, surge occurring frequency, instantaneous voltage variation, voltage unbalance, flicker etc. have greatly threatened the power quality, and the deterioration of electric power facilities and the functional error of controllers are increasing. As such an instantaneous minute interruption appears to be small and local, accurate evaluation with measurement is difficult and total analysis system is required through a wide range of power quality effect analysis such as the simultaneous measurement on various power supply phenomena and the analysis on the interrelation with system loads. Most of conventional power quality diagnosis equipments have beer developed and applied, which were able to measure the stability rate of frequency, the stability rate of voltage, the electricity-failure duration etc, However, they were insufficient to analyze the system present situation, understand the cause of the failure occurred by the problem of power quality and analyze out the phenomena. Accordingly, this study will address the development of the system for a wide range of power quality diagnosis over the present level, the system for supporting the determination such as the analysis on risk factors, failure mode and impact, the system for harmonic evaluation based on international standards(IEC 61000 Series) and the total power quality diagnosis network & system with the extension and openness as a local and national-scale broadband power quality diagnosis system.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.7
• /
• pp.1187-1194
• /
• 2007

The three major active isoflavonoids (calycosin-7-O-β -glucoside, isomucronulatol 7-O-β-glucoside, formononetin) and two main saponins (astragaloside I, astragaloside IV) in an extract of Radix Astragali were determined using rapid, sensitive, reliable HPLC/UV and LC-ESI-MS/MS methods. The separation conditions employed for HPLC/UV were optimized using a phenyl-hexyl column (4.6 × 150 mm, 5 μm) with the gradient elution of acetonitrile and water as the mobile phase at a flow rate of 1.0 mL/min and a detection wavelength of 230 nm. The specificity of the peaks was determined using a triple quadrupole tandem mass spectrometer equipped with an electrospray ionization (ESI) source that was operated in multiple reaction monitoring (MRM) in the positive mode. These methods were fully validated with respect to the linearity, accuracy, precision, recovery and robustness. The HPLC/UV method was applied successfully to the quantification of three major isoflavonoids in the extract of Radix Astragali. The results indicate that the established HPLC/UV and LC-ESI-MS/MS methods are suitable for the quantitative analysis and quality control of multi-components in Radix Astragali.

• Korean Journal of Veterinary Service
• /
• v.27 no.1
• /
• pp.17-29
• /
• 2004

A multiresidual analysis was performed to determine 12 sulfonamides(sulfacetamide, sulfadiazine, sulfisomidine, sulfathiazole, sulfapyridine, sulfamerazine, sulfamethazine, sulfamonomethoxine, sulfisoxazole, sulfamethoxazole, sulfaquinoxaline, and sulfadimethoxine) in beef and pork simultaneously. The multiresidual analysis for the sulfonamides currently used was able to analyze 5 kinds of sulfonamides at the same time. The method of this 12 sulfonamides multiresidual analysis in this study was matrix solid-phase dispersion(MSPD) by high performance liquid chromatography (HPLC) and liquid chromatography mass spectrometry (LC/MS). The recovery rate of the materials was measured by MSPD method with 3 different extraction solvents; Dichloromethane, DCM: Ethylacetate(3:1), DCM:EA(9:1). Also, samples (84 beef and 205 pork samples) which were positive by EEC-4 plate test from 2001 to 2003 were tested to investigate the kinds of sulfonamides using HPLC. The results from the study were as follows; 1. The recovery rate of the materials was measured by MSPD method with 3 different extraction solvents; Dichloromethane, DCM:Ethylacetate(3:1), DCM:EA(9:1). The method of extraction solvent with DCM:ethyl acetate(9:1) was the most excellent(87.7∼99.3%) in separation and reappearance. 2. In the LC/MS analysis. of sulfonamides, signal to noise ratio was showed relatively high in the positive mode and special ion in the quality analysis was determined via [M+H]$\^$+/ and m/z 156. A spectrum of sulfonamides was showed from all 12 sulfonamides. 3. The samples positive by the EEC-4 plate, a screening test method, were categorized by sulfonamides through Charm II and confirmed the kinds of sulfonamides through HPLC. 1) Among 84 beef samples positive by EEC-4 plate, 20 samples were positive by Charm II and identified as 7 sulfamethazine, 9 sulfadimethoxine, 1 sulfamonomethoxine and 3 unknown status. 2) Among 205 pork samples positive by EEC-4 plate, 42 samples were positive by Charm II and identified as 19 sulfamethazine, 1 sulfadimethoxine, 4 sulfamonomethoxine and 5 unknown status.

• Korean Journal of Veterinary Service
• /
• v.30 no.1
• /
• pp.13-21
• /
• 2007

An atmospheric pressure chemical ionization (APcI) LC/MS/MS method was developed for the simultaneous analysis of fluoroquinolones (norfloxacin, ciprofloxacin, enrofloxacin, danofloxacin) residues in eggs. The spiked and blank samples were extracted from whole eggs using 50mM phosphate buffer (pH 7.4). The extract was cleaned up by passage though $Oasis^{(R)}$ MAX extraction cartridge for solid-phase extraction followed by elution with 4% formic acid in methanol. The extract of sample was separated on a Waters $Atlantis^{TM}$ $dC_{18}$ reversed-phase column ($4.6{\times}150mm,\;5{\mu}m$) and analyzed by APcI positive mode mass spectrometry. The mobile phase consists of aqueous 0.2% nonafluoropentanoic acid (NFPA) and methanol. Multiple reaction monitoring (MRM) using the precursor to product ion combinations of m/z $320\;{\dashrightarrow}\;302,\;332\;{\dashrightarrow}\;314,\;360\;{\dashrightarrow}\;342$ and m/z $358\;{\dashrightarrow}\;340$ were used to quantify norfloxacin (NOR), ciprofloxacin (CIP), enrofloxacin (ENR) and danofloxacin (DAN), respectively. The limits of quantification (LOQ) were 7.8ppb for NOR, 8.5ppb for CIP, 8.9ppb for ENR, and 4.8ppb for DAN. Average recoveries of fortified sample at levels of 0.025 to 0.1 ppm were estimated 71.29% for NOR, 75.27% for CIP, 85.51% for ENR and 81.22% for DAN. These results could be applied for the confirmation and quantification in eggs.

• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.240-245
• /
• 2018

A flexible dispersion-managed link configuration is proposed by using single-mode fibers (SMFs) and dispersion-compensating fibers (DCFs) with irregular dispersion coefficients and lengths over all fiber spans for compensating of WDM channels distortion due to the group velocity dispersion and nonlinear effects of optical fibers. The flexibility of link is enabled by artificially distributing of these fibers based on the dispersion coefficients of DCFs in each half transmission section. The simultaneous ascending and descending (AD) distribution of the DCF's coefficients before and after the optical phase conjugator, respectively, best compensates the distorted wavelength division multiplexed signals in the optical link. Therefore, to improve the compensation effect of the distorted WDM channels, AD distribution is needed to choice regardless of fiber lengths and the residual dispersion per span and fiber's dispersion coefficients.

• Microbiology and Biotechnology Letters
• /
• v.15 no.6
• /
• pp.430-435
• /
• 1987

A chitin-immobilized enzyme amyloglucosidase(AMG) and a bacterium Zymomonas mobilis were coentrapped in alginate gel beads. Ethanol production was performed in a packed bed column reactor in a simultaneous saccharification and fermentation(SSF) mode using liquefied sago starch as a substrate. It was found that this process eliminated product inhibition and reverse reaction of glucose enhancing the rate of saccharification and ethanol production. At a low dilution rate of D = 0.11 hr$^{-1}$, the steady-state ethanol concentration was 46.0g/$m\ell$ (96.8 % of theoretical yield). The maximum ethanol productivity was 17.7g/$m\ell$, h at D = 0.83 hr$^{-1}$ when the calculation was based on the total working volume. The continuous production of ethanol was maintained stably over 40 days without problems in this reactor system.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.265-272
• /
• 1999

A simultaneous profile analysis of 19 environmental estrogens, which act like estrogen and may effect the endocrine system by binding to hormone receptors or influencing cell signaling pathways, was attempted. The present method was based on the selected ion monitoring (SIM) mode of gas chromatography/mass spectrometry (GC/MS). It involves solid-liquid extraction, enzyme hydrolysis, liquid-liquid extraction and quantitative conversion into trimethylsilyl (TMS)-ether derivatives. Analytical recovery range was 47.6 ~ 99.5% and the RSD values of within-a-day and day-to-day test were 0.66 ~ 9.33%, 1.66 ~ 16.14%, respectively. The Korean reference values for the evaluation of environmental estrogen effects were established by this method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.4
• /
• pp.480-486
• /
• 2016

Manufacturers have been applying several technologies that can improve the fuel economy of their cars. The regulated voltage control(RVC) system, is one of those technologies being used in passenger cars. In RVC, the voltage of an alternator is controlled depending on the electrical load demand or battery SOC, although each manufacturer differs from another in terms of detail. RVC can reduce the load of an alternator by consuming the stored energy of a battery and simultaneously generate energy. In this paper, a diesel passenger car equipped with an RVC system was tested under FTP-75 and HWFET modes to evaluate fuel economy as their initial battery SOC(100, 90, 80 and 60 %). The test results showed that the initial SOC affects fuel economy only under the FTP-75 mode. FTP-75 fuel economy of the 60% SOC was 13.2 % lower than the 100 % SOC. Also, the simultaneous consumption of the two energy sources did not appear in 60 % SOC.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.114-123
• /
• 2005

A nonlinear speed control of a PMSM using a sequential parameter auto-tuning algorithm for servo equipments is presented. The nonlinear control scheme gives an undesirable output performance under the mismatch of the system parameters and load conditions. Recently, to improve the performance, an adaptive linearization scheme, a sliding mode control and an observer-based technique have been reported. Although a good performance can be obtained, the performance is not satisfactory any more under specific conditions such as a large inertia variation, a fast speed transient or an increased sampling time. The simultaneous estimation of principal parameters giving a direct influence on speed dynamics is generally not simple. To overcome this problem, a a sequential parameter auto-tuning algorithm at start-up is proposed, where dominant parameters are estimated in a prescribed regular sequence based on the method that one parameter is estimated during each interval. The proposed scheme is implemented on a PMSM using DSP TMS320C31 and the effectiveness is verified through simulations and experiments.