• 제어로봇시스템학회논문지
• /
• 제14권2호
• /
• pp.111-117
• /
• 2008

This paper presents a new continuation-based quasi-steady-state(CQSS) time-domain simulation algorithm incorporating a multiplicative aggregated load model for power systems. The authors' previous paper introduced a CQSS algorithm, which has the robust convergent characteristic near the singularity point due to the application of a continuation method. The previous CQSS algorithm implemented the load restoration in power systems using the exponent-based load recovery model that is derived from the additive dynamic load model. However, the reformulated exponent-based model causes the inappropriate variation of short-term load characteristics when switching actions occur, during time-domain simulation. This paper depicts how to incorporate a multiplicative load restoration model, which does not have the problem of deforming short-term load characteristics, into the time simulation algorithm, and shows an illustrative example with a 39-bus test system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.145-147
• /
• 2008

In this paper, the implementation of the Permanent Magnet Synchronous Machine (PMSM) model based on the Matlab/Simulink is described. Due to the analysis of the mathematical dq-modeling, a vector controlled PMSM drive simulation is approached. With the simulated system, unlike in black block models, all machine parameters are accessible for control and verification. Based on the Matlab/Simulink, the model of the PMSM with load torque is established, the simulation is studied and some conclusions are given.

• 대한임베디드공학회논문지
• /
• 제12권5호
• /
• pp.287-293
• /
• 2017

The naval unmanned surface vehicle (USV) conducts the surveillance operations, based on the mission plan set by the user. For setting the mission planning, the user needs to analyze the suitability of the operation for the mission planning. In this paper, we proposed a simulation program that estimates the probability of detecting targets of the mission planning in the analysis. In the simulation analysis, we design the USV's maneuvering characteristics, radar detection operational performance equipped on the USV, and targets infiltrating into surveillance area in the simulation experiment scenario. Based on the simulation results, we evaluated the mission planning suitability and find a mission planning solution recursively.

• 한국통신학회논문지
• /
• 제33권11B호
• /
• pp.989-997
• /
• 2008

The reverse acknowledgment (RA) scheme supports a fast loss recovery for negative acknowledgment (NAK)-based selective repeat automatic repeat request (SR-ARQ) by detecting a retransmission failure quickly before a retransmission timer expires. In this paper, we evaluate the performance of a NAK-based SR-ARQ protocol with the RA scheme and compare it with the conventional NAK-based SR-ARQ protocol. Particularly, we propose a simple analysis model for the transport delay of the NAK-based SR-ARQ protocol considering the traffic condition, the retransmission persistence, the timer-based retransmissions and the RA scheme's behavior. Both NAK-based SR-ARQ protocols with and without the RA scheme are implemented by using the OPNET simulator. We verified the analysis model's accuracy through the simulation results. Also, we evaluate the performance of the NAK-based SR-ARQ protocol with the RA scheme based on analysis and simulation results.

• 시스템엔지니어링학술지
• /
• 제15권1호
• /
• pp.9-15
• /
• 2019

DIRCM is a device that deception missiles by directing the light source to missile seeker with infra-red laser based turret. The effectiveness of the device is affected by changes of the turret's Field of View (FoV), and also influence of the interference devices determines the effect of the DIRCM's effectiveness. Therefore finding mounting location for DIRCM is critical parameter for the DIRCM's effectiveness. so we applied stiffness review, interference analysis, FoV analysis and simulation analysis method to Multi-purpose helicopter for the find DIRCM location. As a result, in case of 1 DIRCM mounted at helicopters bottom shows 30~40% survivability. case of 2 DIRCM mounted at both side shows 70~80% survivability.

• 한국CDE학회논문집
• /
• 제20권3호
• /
• pp.221-229
• /
• 2015

M&S (Modeling & Simulation) based design is widely accepted for the development of the future weapon system with better performance in a cheaper and faster way. Integrated simulation environment (ISE) is needed for the M&S based design. On the ISE, system engineers can not only verify design options but also validate system requirements. In this paper, we propose architectural models of the integrated simulation environment (ISE) which incorporates mission effectiveness M&S (Modeling & Simulation), system performance M&S, the optimization model of integrated performances, digital mockup and virtual prototype. The ISE architectural models may be used to implement the ISE for the development of the future unmanned ground combat vehicle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.917-918
• /
• 2012

• 한국안전학회지
• /
• 제32권3호
• /
• pp.54-59
• /
• 2017

This paper presents an efficient finite analysis model and a simulation-based reliability analysis method for stowage device system failure of a container crane with respect to lateral load. A quasi-static analysis model is introduced to simulate the nonlinear resistance characteristics and failure of tie-down and stowage pin, which are the main structural stowage devices of a crane. As a reliability analysis method, a subset simulation method is applied considering the uncertainties of later load and mechanical characteristic parameters of stowage devices. An efficient Markov chain Monte Carlo (MCMC) method is applied to sample random variables. Analysis result shows that the proposed model is able to estimate the probability of failure of crane system effectively which cannot be calculated practically by crude Monte Carlo simulation method.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.331-337
• /
• 2015

The power flow analysis of electrified railway is required complicated calculation, because of variable load. Train runs trough rail supplied by electric power therefore, the load value in electrified railway system fluctuates along time. The power flow algorithm in electrified railway system is different from general power system, and the power flow simulation is peformed by the particular simulation software. Powerail is simulation software for analysis of traction power supply system developed by KRRI, in 2008. This consists of load forecasting module, including TPS and time scheduling, and power flow module. This software was verified by measured current under normal feeding condition, however, has not been verified by voltage on the condition of extended feeding. This paper presents the verification of PowerRail based on voltage drop under extended feeding condition. This is performed by comparing simulation result with field test. Field test and simulation is done in commercial railway line.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.517-523
• /
• 2010

Recently, the rapid evolution of computational fluid dynamics (CFD) has enabled its key role in industries and predictive sciences. From diverse research disciplines, however, are there strong needs for integrated analytical tools for multi-phenomena beyond simple flow simulation. Based on the concurrent simulation of multi-dynamics, multi-phenomena beyond simple flow simulation. Based on the concurrent simulation of multi-dynamics, multi-physics and multi-scale phenomena, the multi-phenomena CFD technology enables us to perform the flow simulation for integrated and complex systems. From the multi-phenomena CFD analysis, the high-precision analytical and predictive capacity can enhance the fast development of industrial technologies. It is also expected to further enhance the applicability of the simulation technique to medical and bio technology, new and renewable energy, nanotechnology, and scientific computing, among others.