• 전기학회논문지
• /
• 제62권2호
• /
• pp.252-256
• /
• 2013

In order to overcome the complexity and performance limit problems of superscalar processors, the multi-core architecture has been prevalent recently. Usually, the number of cores mostly used for the multi-core processor architecture ranges from 2 to 16. However in the near future, more than 32-cores are likely to be utilized, which is called as many-core processor architecture. Using SPEC 2000 benchmarks as input, the trace-driven simulation has been performed for the 32 to 1024 many-core architectures extensively. For 1024-cores, the average performance scores 15.7 IPC, but the performance increase rate is saturated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권3호
• /
• pp.610-625
• /
• 2015

In this paper the wave run-up around a circular column in regular waves is numerically calculated to investigate the applicability of the Modified Marker-Density (MMD) method to prediction of wave run-up around an offshore platform. The MMD method is one of the methods to define the highly nonlinear free surface. The governing equations are the Navier-Stokes equations and the continuity equation which are computed in Cartesian grid system. To validate incident waves generated by numerical simulation, those are compared with the solutions of the Stokes $5^{th}$ order wave theory. The wave run-up simulations are performed varying the steepness and period of incident waves as referred experimental data. The numerical results are compared to the experimental data and the results show good agreements.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.474-481
• /
• 2019

The speed trial of a ship is one of the important elements guaranteeing its performance under the contract between the ship owner and shipbuilding company. A speed trial at sea, where the tidal current and waves are suppressed to the maximum, can prevent measurement errors due to external force conditions. On the other hand, it is difficult to maintain a calm sea state in most sea areas determined by the influence of the tidal current, wave, wind, etc. Therefore, this study evaluated a method of simulating a tidal current, which is one of the external force conditions, at the speed test operation of a ship, and applied the simulation result to the plan of a speed trial.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.835-840
• /
• 2009

Lately, Building Information Modeling (BIM) emerges as the most promising technology, now is expected to bring a great deal of improvement of productivity in every aspect of the construction industry. One of the BIM based scheduling is to use BIM model as a base for applying to schedule analysis and simulation tools. This type of tools may incorporate a various types of information such as the building model, construction method information, resource information, productivity information, rules and constraints to optimize activity sequencing. This paper proposes a framework of BIM based simulating system which can be used to optimize construction processes, especially for the floor construction cycle. For the purpose, all of the necessary components of the system will be defined and represented, and next an algorithm will be introduced to demonstrate the principle of simulating operation. The benefits of this technique are basically two : to test and optimize construction methods in respect of the construction duration and to reduce the floor construction cycle.

• 한국멀티미디어학회논문지
• /
• 제17권4호
• /
• pp.526-534
• /
• 2014

Most of the multiplayer games available online are based on a client-server architecture because this architecture gives better administration control to the game providers than peer-to-peer architecture. In this architecture, the server is responsible for all the communication between the connected clients. The weakness of this architecture is its bandwidth requirement and scalability. Peer-to-peer architectures have then been proposed to solve these issues. In this paper, we propose a hybrid client-server architecture in which the game state is partially shared by the mobile terminal to achieve consistency among different players. Like a peer-to-peer architecture, this architecture uses client-side capacities to reduce bandwidth requirements for the server and improves consistency in wireless networks. Client events have different timeliness and consistency requirements according to their nature in the game world. These requirements lead to tasks with different priorities on CPU processing. In the proposed architecture, either the server or the client applies consistency mechanism according to the priority level. Simulation experiments show that the bandwidth of the server in this architecture is smaller than that of the client-server architecture. As a result, the server in the proposed architecture can accommodate more clients with enhancing the scalability.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1109-1114
• /
• 2003

In this paper, task control architecture is proposed for a mobile robot with behaviors based on cognition theory to endow the robot intelligence. In the task control architecture, task manager is introduced especially for the management of computational resource. The management is based on classical RMS (Rate Monotonic Strategy), but with online rate modulation strategy. The rate modulation is performed using the value variances of behavior execution for the task. Because the values are based on natively uncertain sensor information, they are modeled using PDF (probability Density Function). As a rate modulation process, the range of the rate modulation is defined firstly by real-time constraints of RMS and discrete control stability of behaviors. With the allowable range, rate modulations are performed considering harmonic bases to maintain utilization bound without decrease. To evaluate the efficiency of the proposed rate modulation strategy, a simulation test is performed to compare the efficiency between the control architecture with the proposed strategy and previous one. A performance index with the formalization of propensity of resource allocation is proposed and utilized for the simulation test. To evaluate the appropriateness of the performance index, the performance index is compared with practical one through a practical simulation test.

• 한국조경학회지
• /
• 제35권2호통권121호
• /
• pp.55-63
• /
• 2007

The purpose of this study is to create a planting design for progressive realization. For this, visual preferences as measured via questionnaire were evaluated by the Scenic Beauty Estimation(SBE) and paired comparison methods. The results can be summarized as follows. Through photo observation, the average visual blockage ratio was 38% and the range of degree of the visual blockage ratio was $30{\sim}50%$. The sketch simulation and filtered pattern received the highest preference score and fumed out to be the most practical pattern out of all the patterns evaluated. Also, in the sketch simulation, the high preference values were observed for a distance of 9 to 12m from the view point to the blockage tree with a D/H ratio of 2. The preference score significantly decreased with the increase of the visual blockage ratio having a turning point at $30{\sim}35%$ of the visual blockage ratio, even though the distance parameters were more important than the visual blockage ratio in the scores. An outstanding view must be handled properly to be preserved or accentuated. Framed, open, enclosed, screened or filtered pattern views should be completely revealed only from their best vantage point, not given away at first glimpse. It this sense, parallax spatial beauty with trees could be improved through the visual aspects of plan arrangements and seems to be an effective design technique for landscape planning and planting design.

• Steel and Composite Structures
• /
• 제34권5호
• /
• pp.715-732
• /
• 2020

High-strength steel composite Y-eccentrically braced frame (Y-HSS-EBF) is a novel structural system. In this study, the spatial substructure hybrid simulation test (SHST) method is used to further study the seismic performance of Y-HSS-EBF. Firstly, based on the cyclic loading tests of two single-story single-span Y-HSS-EBF planar specimens, a finite element model in OpenSees was verified to provide a reference for the numerical substructure analysis model for the later SHST. Then, the SHST was carried out on the OpenFresco test platform. A three-story spatial Y-HSS-EBF model was taken as the prototype, the top story was taken as the experimental substructure, and the remaining two stories were taken as the numerical substructure to be simulated in OpenSees. According to the test results, the validity of the SHST was verified, and the main seismic performance indexes of the SHST model were analyzed. The results show that, the SHST based on the OpenFresco platform has good stability and accuracy, and the results of the SHST agree well with the global numerical model of the structure. Under strong seismic action, the plastic deformation of Y-HSS-EBF mainly occurs in the shear link, and the beam, beam-columns and braces can basically remain in the elastic state, which is conducive to post-earthquake repair.

• KIEAE Journal
• /
• 제15권3호
• /
• pp.15-20
• /
• 2015

Purpose: Suggesting a working prototype of a kinetic light shelf unit and revealing its energy efficiency by a series of building performance simulations were presented. Recently, kinetic building envelope has been an emerging technology as an innovative way to control exterior building environment, but products from many researches about the facade could not been reached to the industrialization so far. That is because its initial installation, operation and maintenance costs are still too high to use for the practical field, although buildings using kinetic envelopes could decrease their energy consumption significantly. This narrow point of view needs to be reconsidered, since buildings require great amount of energies to run their functions through the whole life and using better building components can lead to achieve much more benefits in aspects of the lifecycle cost (LCC). Method: A series of certified simulation tools like Ecotect and Green Building Studio that are normally used for researches and developments in the field of architecture were utilized. Result: Based on simulation analyses, the result of the study has showed that the proposed system definitely has adaptability to the professions and positively shows practicability as advanced integrative building envelopes with renewable energy association.

• KIEAE Journal
• /
• 제16권1호
• /
• pp.21-28
• /
• 2016

Purpose: The purpose of this study is to analyze & suggest the variation of energy consumption consequent on thermal insulation performance strengthening from early 2000s when modernization of barracks began until the present targeting a large barracks. Method: To carry out this research, this study surveyed the standard of thermal insulation by year, which is being applied to a barracks by conducting literature search, and selected the standard model for a barracks. Also, this study analyzed energy consumption by year & region by performing simulation(ECO2)of the selected standard model. Result: As a result, it was analyzed that in case of a building which was completed in 2015, the energy consumption for air-conditioning & heating, lighting, and hot water supply over the year 2000 reduced by 11% on the average in central district, 10% on the average in southern district, and 17% on the average in Jeju, respectively.