• 대한조선학회논문집
• /
• 제43권5호
• /
• pp.619-629
• /
• 2006

The safety assessment of the structure related to people has become the most important part in the process of the design. Especially, in the case of a ship, as regulations about the safety of passengers and the pollution in the ocean are strictly reinforcing, the safety assessment has become the most important part in the process of the design. In this paper, we suggested network-based simulation system framework using HLA (High Level Architecture) among many kind of simulations to assess the safety of the ship. In addition, the visualization method which is composed of graphic user interface for ship modeling and the visualization of ship motion is presented.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권2호
• /
• pp.188-197
• /
• 2016

Offshore substructures have been developed to support structures against complex offshore environments. The load at offshore substructures is dominated by waves, and deformation of waves caused by interactions with the current is an important phenomena. Wave load simulation of fixed offshore substructures in waves with the presence of uniform current was carried out by numerical wave tank technique using the commercial software, FLUENT. The continuity and Navier-Stokes equations were applied as the governing equations for incompressible fluid motion, and numerical wavemaker was employed to reproduce offshore wave environment. Convergence test against grids number was carried out to investigate grid dependency and optimized conditions for numerical wave generation were derived including investigation of the damping effect against length of the damping domain. Numerical simulation of wave and current interactions with fixed offshore substructure was carried out by computational fluid dynamics, and comparison with other experiments and simulations results was conducted.

• 한국조경학회지
• /
• 제29권5호
• /
• pp.20-27
• /
• 2001

The purpose of this study is to investigate and compare the validity and the reliability of the visual simulation method using the internet. For this. the evaluation of the artificial and natural landscape through the medium of color slides are compared with the internet survey. Data is analysed through the comparison of t-test between the two media by landscape type, and spatial image is analysed by factor analysis algorithm. Principle component analysis using Varimax Method is applied for extraction and factor rotation respectively. The results of this study can be summarized as follows; There are no statistical differences between the two methods with artificial and natural landscape in the total data that included second tests. Factors covering the spatial image are found to be \`aesthetic\`, \`spatial shape\`, and \`familiarity\`. Total variance is obtained as 66.4%. There are no statistical differences between the two methods in 2/3 of the cases. In the case of far view of artificial landscape, the results of the t-test show that the two methods are exactly the same. Especially in the case of the artificial far landscape shows no difference of all factors between two methods. There are no differences between first and second tests of the same media and the same landscape type. And it shows the reliability of this method. These results suggest that the probability that the internet can be used as a medium of landscape evaluation and gathering information on anyone\`s landscape image. Simulation techniques with the internet survey method should be further developed for practical application.

• 한국해양공학회지
• /
• 제32권3호
• /
• pp.166-176
• /
• 2018

This paper presents a numerical sensitivity analysis for the simulation of the motion performance of an offshore structure in waves using computational fluid dynamics (CFD). Starting with 2D wave simulations with varying numerical parameters such as grid spacing and CFL value, proper numerical conditions were found for accurate wave propagation that avoids numerical diffusion problems. These results were mapped on 2D error distributions of wave amplitude and wave length against the numbers of grids per wave length and per wave height under a given CFL condition. Finally, the 2D numerical sensitivity result was validated through CFD simulation of the motion of a FPSO in waves showing good accuracy in motion RAOs compared with existing potential flow solutions.

• Geomechanics and Engineering
• /
• 제20권5호
• /
• pp.447-459
• /
• 2020

Based on the literature statistical method, the paper publication status of the isolated working face and the distribution of the rockburst coal mine were obtained. The numerical simulation method is used to study the stress distribution law of working face under different mining range. In addition, based on the similar material simulation test, the overlying strata failure modes and the deformation characteristics of coal pillars during the mining process of the isolated working face with thick-hard key strata are analyzed. The research shows that, under the influence of the key strata, the overlying strata formation above the isolated working face is a long arm T-type spatial structure. With the mining of the isolated working face, a series of damages occur in the coal pillars, causing the key strata to break and inducing the rockburst occurs. Combined with the mechanism of rockburst induced by the dynamic and static combined load, the source of dynamic and static load on the isolated working face is analyzed, and the rockburst monitoring methods and the prevention and control measures are proposed. Through the above research, the occurrence probability of rockburst can be effectively reduced, which is of great significance for the safe mining of deep coal mines.

• Wind and Structures
• /
• 제29권6호
• /
• pp.389-403
• /
• 2019

In this study, two original spectral representations of stationary stochastic fields, say the continuous proper orthogonal decomposition (CPOD) and the frequency-wavenumber spectral representation (FWSR), are derived from the Fourier-Stieltjes integral at first. Meanwhile, the relations between the above two representations are discussed detailedly. However, the most widely used conventional Monte Carlo schemes associated with the two representations still leave two difficulties unsolved, say the high dimension of random variables and the incompleteness of probability with respect to the generated sample functions of the stochastic fields. In view of this, a dimension-reduction model involving merely one elementary random variable with the representative points set owing assigned probabilities is proposed, realizing the refined description of probability characteristics for the stochastic fields by generating just several hundred representative samples with assigned probabilities. In addition, for the purpose of overcoming the defects of simulation efficiency and accuracy in the FWSR, an improved scheme of non-uniform wavenumber intervals is suggested. Finally, the Fast Fourier Transform (FFT) algorithm is adopted to further enhance the simulation efficiency of the horizontal stochastic wind velocity fields. Numerical examplesfully reveal the validity and superiorityof the proposed methods.

• 한국시뮬레이션학회논문지
• /
• 제17권1호
• /
• pp.23-32
• /
• 2008

본 논문에서 한미 워게임 모델 상호운용성의 현 실태와 향후 비전에 대해 연구하고 미래의 페더레이션 구조를 제안한다. 한국군과 미군은 1999년부터 작전요구를 충족하기 위한 한미 워게임 모델의 상호운용성 향상을 위해 노력해 왔다. 현 상태에서 목표를 달성하기 위해 아직도 수행해야 할 과정이 더 남아 있지만 최종목표에 어느 정도 근접한 상태이다. 한미 워게임 체계의 기술적인 장점과 시스템 가용도를 고려한 향후 한미 워게임 체계 상호운용성 향상을 위한 시스템 구조를 제시한다. 이러한 새로운 체계는 한국군이 주도하는 향후 한미 연합연습과 한국군 자체 합동연습시 운용될 시뮬레이션 구조라고 할 수 있다.

• 한국해양공학회지
• /
• 제21권1호
• /
• pp.64-68
• /
• 2007

Recently, there has been considerable research in the field of application of Laser-Arc hybrid welding for superstructures, such as ship-structures, transport vehicles etc. However, the study on heat distribution and welding residual stress of hybrid weld by numerical simulation leaves much to be desired. Therefore, in this study, an optimized welding condition and numerical simulation for hybrid welding, using previous numerical analysis to calculate the heat source for hybrid welding, has been analyzed. For this purpose, fundamental welding phenomena of the hybrid process, using Laser and, is investigated. In order to calculate temperature and residual stress distribution in hybrid welds, a finite element heat source model is developed on the basis of experimental results and characteristics of temperature. Residual stress distribution in hybrid welds are understood from the result of simulation, and compared with the experimental values.

• 한국정보처리학회논문지
• /
• 제4권10호
• /
• pp.2553-2561
• /
• 1997

본 논문에서는 영상인식을 위한 직선 HT(Hough transform) 알고리즘 연산의 하드웨어 구조를 제안하였다. 이 연산기는 기울기연산을 위한 필터링부위와 HT 연산부위로 이루어졌으며, 이때 각도에 관한 정보는 메모리 테이블에 저장하였다. 제안된 구조는 C 언어를 이용한 알고리즘 시뮬레이션을 수행하며 동작의 확인과 계산의 정밀도를 결정한 다음, 전체블록에 대하여 VHDL 언어에 의한 아키텍쳐 시뮬레이션을 수행하였다. 각 실험결과에 의하면, 연산된 데이타 값이 유사하게 얻어졌으며, 영상의 선명도와 사용 비트수가 커질수록 연산값의 차이가 적어짐을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.293-296
• /
• 2004

This paper proposes an architecture of channel estimation for multi-band OFDM UWB systems presented to IEEE 802.15.3a by Multi-band OFDM alliance(MBOA). The multi-band OFDM (MB-OFDM) systems should have channel estimation for compensation of signal distortion by multi-band channel. The moving-averaging estimation algorithm and multi-band equalization architecture for MB-OFDM UWB systems proposed in this paper was verified by the simulation. Simulation results show that MB-OFDM system with the proposed architecture have the performance improved by about 3.4 dB compared to system with no channel estimation in 0.1$\pi$ phase-rotated channel.