• 조명전기설비학회논문지
• /
• 제22권2호
• /
• pp.142-147
• /
• 2008

제한적인 환경에서 동작하는 무선 센서네트워크 환경에서 가장 중요한 목표 중 하나는 자원의 효율적인 사용을 통한 네트워크의 수명 연장이다. 본 논문에서는 이를 위해 동적인 클러스터헤드 선택 방법과 최단거리 전송기법을 사용하여 효과적인 다중-홉 라우팅 알고리즘을 제안한다. 대표적인 클러스터링 알고리즘인 LEACH 알고리즘과의 비교를 위해 Network Simulator 2을 통해 시뮬레이션 해본 결과, 무선 센서노드의 수명이 최대 37.71[%] 증가하였음을 확인하였다.

• ETRI Journal
• /
• 제14권4호
• /
• pp.19-27
• /
• 1992

Since. as is well known, direct computation of the reliability for a large-scaled and complex net work generally requires exponential time, a variety of alternative methods to estimate the network reliability using simulation have been proposed. Monte Carlo sampling is the major approach to estimate the network reliability using simulation. In the paper, a dynamic Monte Carlo sampling method, called conditional minimal cut set (CMCS) algorithm, is suggested. The CMCS algorithm simulates a minimal cut set composed of arcs originated from the (conditional) source node until s-t connectedness is confirmed, then reduces the network on the basis of the states of simulated arcs. We develop the importance sampling estimator and the total hazard estimator and compare the performance of these simulation estimators. It is found that the CMCS algorithm is useful in reducing variance of network reliability estimator.

• 한국정밀공학회지
• /
• 제14권7호
• /
• pp.29-38
• /
• 1997

A closed-loop system modeling of an active/semiactive suspension system has been accomplished through an artificial neural network. A 7DOF full model as a system's equation of motion has been derived and an output feedback linear quadratic regulator has been designed for control purpose. A training set of a sample data has been obtained through a computer simulation. A 7DOF full model with LQR controller simulated under several road conditions such as sinusoidal bumps and rectangular bumps. A general multilayer perceptron neural network is used for dynamic modeling and target outputs are fedback to the a layer. A backpropagation method is used as a training algorithm. Model validation of new dataset have been shown through computer simulations.

• 한국시뮬레이션학회논문지
• /
• 제8권4호
• /
• pp.125-136
• /
• 1999

In the forthcoming public ATM/B-ISDN, the efficient resource management with pre-planned transit networking which public domain NNI signaling is essential to maintain high network utilization and to assure QoS to the multimedia service users. For this purpose the transit networks must be managed according to the bearer service capability which is defined by ATM Forum and ITU-T. In this paper, we introduce an implementation of ATM transit networking with ATM VP-XC(Virtual Path cross-connect) and US(Network Management System). The functions of ATM VP-XC and NMS have been simulated with OPNET 6.1 modules. We implemented the F4 OAM functions of ATM VP connection according to the ITU-T 1.610 recommendation. Also, the ATM VP transit networking is managed by the NMS according to the connection management architecture of the TWN(Telecommunications Management Network) /TINA ( Telecommunications Information Networking Architecture).

• 제어로봇시스템학회논문지
• /
• 제14권1호
• /
• pp.1-6
• /
• 2008

The ubiquitous sensor network technique is widely applied to variety of information fields such as home automations, logistics, traffic controls, public administrations, health and environment monitoring and etc. It is particularly useful in the areas where energy consumption is minimal and where continuous monitoring of the surrounding environments, which generates streams of data, are required. In this study, we have designed and implemented a living environment automatic control system which collects the streams of temperature, humidity, light and noise data of a simulated house setting in real-time fashion, then controls the home environment based on the collected data according to the users favorites. In order to differentiate the proposed system from the currently existing similar system, we have demonstrated not only the feasibility of collecting data using sensor network in the controlled environment but also the ability to control the various household equipments through wireless communications.

• 전기학회논문지
• /
• 제57권2호
• /
• pp.221-228
• /
• 2008

This paper presents a new method for world wide network motor controlled system. It uses disturbance observer to present high precision position control algorithm to disturbance change, and to apply this to induction motors. It shows that proposed algorithm is strong in induction motor precision control for disturbance change. This system with disturbance observer used deadbeat control, which have high benefit, is good for quick disturbance compensation. To show these effectiveness the whole process is simulated by simulink, and also experimented by DSP6416 with TCP-IP network board.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.668-672
• /
• 2009

In wireless ad-hoc network, knowing the available bandwidth of the time varying channel is imperative for live video streaming applications. This is because the available bandwidth is varying all the time and strictly limited against the large data size of video streaming. Additionally, adapting the encoding rate to the suitable bit-rate for the network, where an overlarge encoding rate induces congestion loss and playback delay, decreases the loss and delay. While some effective rate controlling methods have been proposed and simulated well like VTP (Video Transport Protocol) [1], implementing to cooperate with the encoder and tuning the parameters are still challenging works. In this paper, we show our result of the implementation experiment of VTP based encoding rate controlling method and then introduce some techniques of our parameter tuning for a video streaming application over wireless environment.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1998년도 추계학술발표 논문집
• /
• pp.189-194
• /
• 1998

Design factors are very important and deterministic in determining the first impression of products and environment. The final 30 number of channel button were chosen as a design factors at the Audio Unit. Then, we made the 8 types of prototype. with combining the design factors for experiment. Subjects rated the SD(Semantic Differential) evaluation sheets which have the 30 adjectives after watching each prototype. With the evaluated values, we simulated to identify the relation between the design factors and the adjectives using Neural Network. As a results, we could abstract the affective adjectives on each 8 types. Therefore, this research suggested the possibilities that we can infer the optimal design factors and types using Neural Network, if adjectives were given.

• 한국통신학회논문지
• /
• 제12권3호
• /
• pp.254-266
• /
• 1987

분할법은 대규모회로망을 부분회로망으로 나누어서 해석하는 것으로 그 개념은 개회로와 폐회로에 대한 그래프 이론에 근거를 두고 있다. 본 논문에서는 대형회로망 고유값의 특성방정식을 분할법에 의하여 수식화 하고 반복법을 적용하여 간편하게 특성방정식의 해를 구함으로서 분할하지 않고 해석하는 방법에 비하여 효율적으로 처리할 수 있었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권2호
• /
• pp.53-57
• /
• 2001

This paper presents the new methods of fault diagnosis through multiple alarm processing of protective relays and circuit breakers in power systems using probabilistic neural networks. In this paper, fault section detection neural network (FSDNN) for fault diagnosis is designed using the alarm information of relays or circuit breakers. In contrast to conventional methods, the proposed FSDNN determines the fault section directly and fast. To show the possibility of the proposed method, it is simulated through simulation panel for Sinyangsan substation system in KEPCO (Korea Electric Power Corporation) and the case studies show the effectiveness of the probabilistic neural network mehtod for the fault diagnosis.