• 한국철도학회논문집
• /
• 제13권3호
• /
• pp.309-316
• /
• 2010

철도선형에서 평면곡선과 종곡선의 경합은 차량의 주행안정성, 승차감, 그리고 궤도유지보수비에 많은 영향을 끼친다. 그러나 신선건설 혹은 기존선 개량 시 기존의 고정점(터널, 교량, 분기기, 전차선주 등)들과 예기치 않은 주위 환경조건들에 의해 부득이 부설될 경우가 발생된다. 본 연구에서는 평면곡선과 종곡선 경합 시 승차감 측면에서의 최적 평면선형 설계를 위한 승차감 목적함수를 도출하고 차량동역학 해석을 통해 검증하였다. 또한 제시된 승차감 목적함수를 이용해 승차감이 최대가 되는 선형조건을 간단히 평가할 수 있는 해법알고리즘을 제시하였다.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.439-445
• /
• 2020

In the estimation of the aerosol single fiber efficiency using fibrous filters, there is a size range, where the particles penetrate most effectively through the fibrous collectors, and corresponding minimum single fiber efficiency. For small particles in which the diffusion mechanism is dominant, the Cunningham slip correction factor (C_c) affects the single fiber efficiency and the most penetrating particle size (MPPS). Therefore, for accurate estimation, C_c is essential to be considered. However, many previous studies have neglected this factor because of its complexity and the associated difficulty in deriving the appropriate parameterization particularly for the MPPS. In this study, the expression for the MPPS, and the corresponding expression for the minimum single fiber efficiency are analytically derived, and the effects of C_c are determined. In order to accommodate the slip factor for all particle-size ranges, C_c is simplified and modified. Overall, the obtained analytical expression for the MPPS is in a good agreement with the exact solution.

• 한국분말재료학회지
• /
• 제11권5호
• /
• pp.399-411
• /
• 2004

Crack generation during die compaction and distortion during sintering have been critical problems for the conventional pressing and sintering process. Until now, trial and error approach with engineers' industrial experiences has been only solution to protect the crack generation and distortion. However, with complexity in shape and process it is very difficult to design process conditions without CAE analysis. We developed the exclusive CAE software (PMsolver/Compaction) for die compaction process. The accuracy of PMsolver is verified by comparing the finite element simulation results with experimental results. The simplified procedures to find material properties are proposed and verified with iron based powder and tungsten carbide powder. Based on the accurate simulation result by PMsolver, the optimal process conditions are designed to get uniform density distribution in a powder compact after die compaction process by using a derivative based optimization scheme. In addition, the effect of non-uniform density distribution in a powder compact on distortion during sintering is shown in case of the fabrication of tungsten carbide insert.

• 한국통신학회논문지
• /
• 제19권5호
• /
• pp.833-841
• /
• 1994

본 논문에서는 일반적인 큐잉 시스팀의 큐길이 분포에 대한 근사 이론을 제안하였다. 제안된 근사 이론은 하한치와 상한치를 단계적으로 찾는 2단계 해석적인 근사 방법을 기초로 한다. 이를 이용하면 다양한 트래픽원이 다중화된 모델의 큐길이 분포를 신속히 계산할 수 있다. 본 논문에서는 M+ N D /M / 1 큐잉 시스팀에서 도착하는 고객이나 떠나는 고객이 관측한 큐길이 분포를 계산하고 시뮬레이션을 통해 얻은 결과와 비교하여 제안된 근사이론이 시뮬레이션 결과에 근접함을 확인하였다. 특히 M/M/1큐에 대해 근사이론으로 유도된 공식은 정해와 같았으며, D/M/1 큐에 대해서는 간단한 해석적인 공식을 얻을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.224-227
• /
• 1998

Linear motors are increasingly employed as direct actuators replacing the more conventional systems composed by a rotating motor and a mechanical device. Linear DC motor is useful in a high speed and high accuracy positioning system with a feedback controller. Because of these advantages, linear DC motors have already been used as motors of pen recorders and magnetic disk storage devices, these are moving coil type linear DC motors as these movers are light. Moving magnet type linear DC motor has advantages at long stroke motors because its mover's feeding wires for driving is not necessary. This paper is concerned with the analysis of linear DC motor that is moving magnet type with unipolar. In order to analyze the dynamic behaviour a mathematical model based on a simplified field analysis developed. A two dimensional finite element field solution is employed in order to illustrate the effect of yoke saturation and motor performance. It is deduced the relation between the limit value of the thrust of the linear DC motor and the dimension of the yokes.

• KSBB Journal
• /
• 제5권2호
• /
• pp.183-189
• /
• 1990

1,000l 규모의 인뇨로부터 순수한 urokinase를 정제하는 새로운 공정이 고안되었다. 2가 금속이온인 아연을 첨가하여 선택적으로 urokinase를 침전시켰으며, 이 방법은 뇨 중에 포함된 다른 단백질을 100~1,000배 농축할때도 사용할 수 있으며 10~20배의 경제효과를 얻었다. 침전물 속에 포함된 urokinate를 경제적으로 용출할기 위하여 0.1M EDTA/0.5M glycine, pH 9.0용액이 조성되었고, 용출액속에 포함된 높은 농도의 salt와 ion,뇨색소 등이 CM-Toyopeal column에 의해 신속하고 효과적으로 제거되었다. 최종적으로 사용된 benzamidine-Sepharose chromatog-raphy는 urokinase 정졔에 매우 효과적이었다. 이상의 공정을 통해, 1,000liter의 인뇨로부터 3$\times$$O^6IO$의 urokinase가 순수 정제 되었으며, 수욜은 약 50%, 정제도는 1,300배이었다. 또한 urokinase중에 12~14%의 pro-urokinase가 함유되어 있음이 확인되었다.

• Computers and Concrete
• /
• 제19권2호
• /
• pp.143-152
• /
• 2017

This paper has numerically investigated the changes of loading-induced stress in concrete with the corrosion time in the sulfate-containing environment. Firstly, based on Fick's law and reaction kinetics, a diffusion-reaction equation of sulfate ion in concrete is proposed, and it is numerically solved to obtain the spatial and temporal distribution of sulfate ion concentration in concrete by the finite difference method. Secondly, by fitting the existed experimental data of concrete in sodium sulfate solutions, the chemical damage of concrete associated with sulfate ion concentration and corrosion time is quantitatively presented. Thirdly, depending on the plastic-damage mechanics, while considering the influence of sulfate attack on concrete properties, a simplified chemo-mechanical damage model, with stress-based plasticity and strain-driven damage, for concrete under axial loading and sulfate attack is determined by introducing the chemical damage degree. Finally, an axially compressed concrete prism immersed into the sodium sulfate solution is regarded as an object to investigate the time-varying stress in concrete subjected to the couplings of axial loading and sulfate attack.

• 한국컴퓨터정보학회논문지
• /
• 제13권7호
• /
• pp.247-256
• /
• 2008

본 연구에서는 웹 문서에서의 단순 키워드 매칭으로 검색하는 전자상거래시스템의 문제점을 해결하기 위한 방안으로 도메인 온톨로지를 자동으로 생성하고 이를 기반으로 지능형 에이전트기술을 접목함으로서 의사소통이 단일화된 상품검색시스템을 개발한다. 온톨로지 개발은 국제상품분류코드(UNSPSC)와 귀금속 보석 사이트들의 분류정보를 기반으로 대표용어를 추출하고 유사관계 시소러스 적용하여 표준화된 온톨로지를 구축하며 지능형에이전트 기술을 검색 단계에서 접목시켜 사용자에게 정보수집의 효율성을 지원하도록 시맨틱 웹을 지원하는 상거래 시스템을 설계하고 구현한다. 또한 개인화된 검색 환경을 지원하기 위해 사용자 프로파일을 설계하고, 개인화 검색 에이전트와 추론기능을 이용한 검색 환경을 제공함으로서 정보수집의 신속성과 정확한 정보검색이 가능하도록 지원한다.

• Structural Engineering and Mechanics
• /
• 제3권2호
• /
• pp.121-133
• /
• 1995

It is well known that two-dimensional simplified third-order theories satisfy the layer interface continuity of transverse shear strains, thus these theories violate the continuity of transverse shear stresses when two consecutive layers differ either in fibre orientation or material. The third-order theories considered herein involve four/or five dependent unknowns in the displacement field and satisfy the condition of vanishing of transverse shear stresses at the bounding planes of the plate. The objective of this investigation is to examine (i) the flexural response prediction accuracy of these third-order theories compared to exact elasticity solution (ii) the effect of layer interface continuity conditions on the flexural response. To investigate the effect of layer interface continuity conditions, three-dimensional elasticity solutions are developed by enforcing the continuity of different combinations of transverse stresses and/or strains at the layer interfaces. Three dimensional twenty node solid finite element (having three translational displacements as degrees of freedom) without the imposition of any of the conditions on the transverse stresses and strains is also employed for the flexural analysis of the laminated plates for the purposes of comparison with the above theories. These shear deformation theories and elasticity approaches in terms of accuracy, adequacy and applicability are examined through extensive numerical examples.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.245-248
• /
• 2001

Recently, with the advancement of internet network the system has been needed to be controllable and observable through internet at industrial workplace. In this study, we developed the digital timer which has a communication function to control and observe many kinds of devices by combining relay and timer used for each type of control panel to realize control solution based on internet to be easily applicable at workplace with low cost and adding 485 serial communication module to have parallel expansibility and safety. And, this system was experimented and designed for easy system management and status check from remote station through internet. appling the developed digital timer to parallel sequence control of motor. As the result of experiment, the circuit configuration would be more simplified than the existing, and it is expected that multi-connection control and monitoring can be simply implemented with low cost equipment at industrial workplace.