• 제목/요약/키워드: simplified intensity

검색결과 83건 처리시간 0.032초

Wind tunnel modeling of flow over mountainous valley terrain

  • Li, C.G.;Chen, Z.Q.;Zhang, Z.T.;Cheung, J.C.K.
    • Wind and Structures
    • /
    • 제13권3호
    • /
    • pp.275-292
    • /
    • 2010
  • Wind tunnel experiments were conducted to investigate the wind characteristics in the mountainous valley terrain with 4 simplified valley models and a 1:500 scale model of an existing valley terrain in the simulated atmospheric neutral boundary layer model. Measurements were focused on the mean wind flow and longitudinal turbulence intensity. The relationship between hillside slopes and the velocity speed-up effect were studied. By comparing the preliminary results obtained from the simplified valley model tests and the existing terrain model test, some fundamental information was obtained. The measured results indicate that it is inappropriate to describe the mean wind velocity profiles by a power law using the same roughness exponent along the span wise direction in the mountainous valley terrain. The speed-up effect and the significant change in wind direction of the mean flow were observed, which provide the information necessary for determining the design wind speed such as for a long-span bridge across the valley. The longitudinal turbulence intensity near the ground level is reduced due to the speed-up effect of the valley terrain. However, the local topographic features of a more complicated valley terrain may cause significant perturbation to the general wind field characteristics in the valley.

Effect of excitation intensity on slope stability assessed by a simplified approach

  • Korzec, Aleksandra;Jankowski, Robert
    • Earthquakes and Structures
    • /
    • 제21권6호
    • /
    • pp.601-612
    • /
    • 2021
  • The paper concerns the selection of a design accelerograms used for the slope stability assessment under earthquake excitation. The aim is to experimentally verify the Arias Intensity as an indicator of the excitation threat to the slope stability. A simple dynamic system consisting of a rigid block on a rigid inclined plane subjected to horizontal excitation is adopted as a slope model. Strong ground motions recorded during earthquakes are reproduced on a shaking table. The permanent displacement of the block serves as a slope stability indicator. Original research stand allows us to analyse not only the relative displacement but also the acceleration time history of the block. The experiments demonstrate that the Arias Intensity of the accelerogram is a good indicator of excitation threat to the stability of the slope. The numerical analyses conducted using the experimentally verified extended Newmark's method indicate that both the Arias Intensity and the peak velocity of the excitation are good indicators of the impact of dynamic excitation on the dam's stability. The selection can be refined using complementary information, which is the dominant frequency and duration of the strong motion phase of the excitation, respectively.

상세 트레드 패턴을 반영한 3차원 타이어 유한요소 격자 생성 (3-D Finite Element Mesh Generation of Tires Considering Detailed Tread Pattern)

  • 조진래;김기환;홍상일;김남전;김기운
    • 대한기계학회논문집A
    • /
    • 제27권10호
    • /
    • pp.1615-1622
    • /
    • 2003
  • Being contacted directly with. ground, the tire tread part is in shape of complex patterns of variable ASDs(anti-skid depth) to satisfy various tire performances. However, owing to the painstaking mesh generation job and the extremely long CPU-time, conventional 3-D tire analyses have been performed by either neglecting tread pattern or modeling circumferential grooves only. As a result, such simplified analysis models lead to considerably poor numerical expectations. This paper addresses the development of a 3-D tire mesh generation considering the detailed tread pattern and shows that the contact pressure and frictional energy distribution of tires considering the detailed pattern become better than those by the simplified tire model.

음향인텐시티법에 의한 고체진동 가진판의 소음원 검출에 관한 연구 (A study of noise source identification on plate excited structure borne sound by acoustic intensity method)

  • 오재응;김상헌;홍동표;이찬홍
    • 오토저널
    • /
    • 제8권4호
    • /
    • pp.43-55
    • /
    • 1986
  • 소음저감에 대한 연구에서 소음언을 규명하기 위해서 소음의 발생 메카니즘을 안다는 것은 중요 하다. 구조물의 진동과 이로 인해서 발생되는 방사음과의 관계는 상당히 복잡하기 때문에 본 연 구에서는 음향인텐시티의 측정을 위하여 간단한 방사 모델을 대해 연구하였다. 소음원 규명의 첫 단계로서 본 연구에서는 음압측정에 의한 소음평가에 대해 알아 보았다. 두 번째 단계로서 음향 인텐시티법을 이용하여 음향 방사 모우드 패턴을 결정하였으며 음향인텐시티법이 소음원 검출에 유효함을 입증하였다. 또한 본 연구에서는 방진재 부착에 따른 음의 방사특성을 예측하고 방 진재 부착위치를 결정할 수 있었다.

  • PDF

Efficacy Analysis of Simplified Intensity-modulated Radiotherapy with High or Conventional Dose and Concurrent Chemotherapy for Patients with Neck and Upper Thoracic Esophageal Carcinoma

  • Zhu, Wei-Guo;Zhou, Ke;Yu, Chang-Hua;Han, Ji-Hua;Li, Tao;Chen, Xiao-Fei
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제13권3호
    • /
    • pp.803-807
    • /
    • 2012
  • For patients with neck and upper thoracic esophageal carcinoma, it is difficult to control lymph node metastases with conventional dose therapy. In this study, we assessed the feasibility of simplified intensity-modulated radiotherapy (sIMRT) and concurrent chemotherapy for 44 patients and boosted high-dose to metastatic lymph nodes. Three radiation treatment volumes were defined: PGTVnd, with which 68.1Gy was delivered in high dose group (hsIMRT group), and 60Gy in the conventional dose group (csIMRT group); PTV1, featuring 63.9Gy in the hsIMRT group and 60Gy in the csIMRT group; PTV2, with 54Gy given to both groups. The sIMRT plan included 5 equi-angular coplanar beams. All patients received the cisplatin and 5-FU regimen concurrently with radiotherapy. The treatment was completed within six weeks and one case with grade three acute bronchitis was observed in hsIMRT group. For esophageal lesions, 80% complete response (CR) and 20% partial response (PR) rates were found in the hsIMRT group, and 79.2% CR, with 20.8% PR, in the csIMRT group; for lymph node lesions, 75% CR and 25% PR rates were observed in the hsIMRT group, with 45.8% and 37.5% respectively in the csIMRT group (P<0.05). The differences in 1-, 2- and 3-year relapse-free survival rates were all statistically significant (P<0.05). The major toxicity observed in both groups was Grade I~II leucopenia. sIMRT can generate a desirable dose distribution in treatment of neck and upper thoracic esophageal carcinoma with a better short-term efficacy. Boosted high dosing to metastatic lymph nodes can increase the relapse-free survival rate.

혜르츠접촉하에서 응력확대계수의 간단한 계산법 (A Simplified Estimation of Stress Intensity Factor on the Hertzian Contact)

  • Jin, Song-Bo;Kim, Seock-Sam
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1999년도 제29회 춘계학술대회
    • /
    • pp.30-37
    • /
    • 1999
  • 헤르츠 접촉하에 있는 반무한체에서의 표면균열을 살펴보았다. 시편의 응력확대계수 K를 구하기 위해 사용되는 간단화된 방법을 이 논문에 쓰여진 모델에 적용시켰다. 기존에 알려진 결과에 비해 상당히 만족스런 결과를 얻었으며 다른 방법보다 이 방법이 훨씬 더 편리함이 입증되었다.

  • PDF

지진발생시 교량형식에 따른 낙교위험도 분석 (Analysis of Unseating Failure of Various Types of Bridge Spans under Seismic Excitations)

  • 김상효
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 1998년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
    • /
    • pp.123-130
    • /
    • 1998
  • The probability of unseating failure of the bridge spans under earthquakes is investigated. Seismic excitations are simulated as nonstationary processes by combining a stationary process and an intensity function. For computational convenience, a simplified single-degree-of-freedom model is adopted, which retains the dynamic characteristics of the original brige motion in concern. The time history analysis for the developed single degree-of-freedom model are carried out to evaluate the response processes, and the probabilistic characteristics of response displacements are evaluated. The reliability analysis of the bridge against the unseating failure is performed with the statistical information of the maximum displacements of responses.

  • PDF

SIMPLIFIED APPROACH TO VALUATION OF VULNERABLE EXCHANGE OPTION UNDER A REDUCED-FORM MODEL

  • Huh, Jeonggyu;Jeon, Jaegi;Kim, Geonwoo
    • East Asian mathematical journal
    • /
    • 제37권1호
    • /
    • pp.79-85
    • /
    • 2021
  • In this paper, we investigate the valuation of vulnerable exchange option that has credit risk of option issuer. The reduced-form model is used to model credit risk. We assume that credit event is determined by the jump of the counting process with stochastic intensity, which follows the mean reverting process. We propose a simple approach to derive the closed-form pricing formula of vulnerable exchange option under the reduced-form model and provide the pricing formula as the standard normal cumulative function.

비정질 $As_2S_3$ 박막의 광유도 비등방성과 비등방축의 가역성 (Photoinduced Anisotropy and Reorientation of Anisotropic Axis in Amorphous $As_2S_3$ Thin Film)

  • 김향균
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
    • /
    • pp.162-166
    • /
    • 1990
  • Photoinduced anisotropy (PIA) in amorphous As2S3 (a-As2S3 ) thin film, deposited by vacuum evaporation, is investigated. PIA is induced by linearly polarized Ar+ laser beam (λ=514.5nm) and probed by weak Ar+ laser (λ=514.5nm) and He-Ne laser (λ=632.8nm) beam through the crossed analyzer. Keeping pump beam intensity constantly, rotation of pump beam polarization direction induces reorientation phenomina of anisotropic axis. Introducing directional factor into simplified 3-level system, which is used to analyze photodarkening phenomina, an analytical expression of PIA is derived. Temporal behavior of PIAand its reorientation phenomina are investigated andcompared with theory. In the experiment pump beam intensity is 100mW/$\textrm{cm}^2$ and thickness of a-As2S3 thin film is 3${\mu}{\textrm}{m}$. In those condition, time constant of photoinduced anisotropy obtained by method of least square curve fitting is 4.0$\times$10-2sec-1. The time constant of PIA we obtained is larger than that of photodarkening, 2.8$\times$10-2sec-1.

  • PDF

이차원 하이브리드 특별 요소을 이용한 균열을 내포하는 용접점의 파단 해석 (Fracture analysis of spot-welds with an edge crack using 2-D hybrid special finite element)

  • 양춘휘;송정한;허훈
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2004년도 춘계학술대회 논문집
    • /
    • pp.39-42
    • /
    • 2004
  • In the present paper, a novel systematic method using the 2-D hybrid special finite elements containing an edge crack is employed to study the fracture behaviors of laser beam spot-welds in automotive structures. 2-D hybrid special finite elements each containing an edge crack can assure the high precision especially in the vicinity of crack tips and give a better description of its singularity with only one hybrid element surrounding one crack. Therefore, the numerical modeling of the laser beam spot-welds can be greatly simplified. Some numerical examples are provided to demonstrate the validity and versatility of the proposed method. All the lap-shear, lap-tension and angle clip specimens are analyzed and some useful fracture parameters (such as stress intensity factors, the initial direction of crack growth) are obtained simultaneously.

  • PDF