• Journal of the Korean Chemical Society
• /
• v.57 no.2
• /
• pp.260-263
• /
• 2013

An efficient and environmentally benign protocol for the pseudo four-component synthesis of benzopyranopyrimidines via condensation of salicylic aldehydes, malononitrile and various amines catalyzed by $ZrOCl_2{\cdot}8H_2O$ as an inexpensive and eco-friendly catalyst with high catalytic activity under solvent-free conditions is reported. This protocol provides a new and improved method for obtaining benzopyranopyrimidines in terms of good yields, simple experimental procedure and short reaction time.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.401-404
• /
• 2006

A new log-domain first-order multifunction filter is proposed in this letter. The proposed filter is systematically derived using the state-space synthesis procedure from a corresponding block diagram. It provides low-pass (LP), high-pass (HP), and all-pass (AP) responses simultaneously for a single input signal. The filter circuit has a very simple structure since it uses only bipolar junction transistors (BJTs) and a grounded capacitor. It can be electronically tuned by changing an external current. The filter has a greater bandwidth due to its inherent current-mode and log-domain operations. PSPICE simulations are given to confirm the theoretical analysis.

• 한국전산유체공학회:학술대회논문집
• /
• 2002.05a
• /
• pp.128-133
• /
• 2002

The heat transfer characteristics of a turbulent flow in a ribbed two-dimensional channel have been investigated numerically. The fully elliptic governing equations, coupled with a four-equation turbulence model, $\kappa-\omega-\bar{t^2}-\epsilon_t$, are solved by a finite volume method of SIMPLE type. Calculations have been carried out for three rib cross-sections : square, triangular, and semicircular, with various rib pitches and Reynolds numbers. The procedure appears to be satisfactory as the results for the square rib compare favorably with available experimental data and earlier calculation. The optimal rib pitch that yields the maximum heat transfer has been identified. It is also found that the square rib is most effective in enhancing the heat transfer. The semicircular rib, on the other hand, incurs the least amount of pressure drop but the improvement in heat transfer is substantially lower.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.258-261
• /
• 2004

This paper contains the tension-tension, the tension-tension bearing and the tension-tension steel bolt joint fatigue characteristics of glass fabric/phenol composite laminates. The experimental results show that the bearing and the steel bolt joint fatigue characteristics of the material is so excellent compared with the simple tension fatigue characteristics, that there are no needs of additional strengthening for mechanical joint parts when the parts are properly designed.

• Coupled systems mechanics
• /
• v.6 no.4
• /
• pp.501-522
• /
• 2017

This paper introduces a numerical procedure to incorporate elasto-plastic local deformation effects in the dynamic analysis of beams. The appealing feature is that simple beam type finite elements can be used for the global model which needs not to be altered by the localized elasto-plastic deformations. An overlapping local sophisticated 2D membrane model replaces the internal forces of the beam elements in the predefined region where the localized deformations take place. An iterative coupling technique is used to perform this replacement. Comparisons with full membrane analysis are provided in order to illustrate the accuracy and efficiency of the method developed herein. In this study, the membrane formulation is able to capture the elasto-plastic material behaviour based on the von Misses yield criterion and the associated flow rule for plane stress. The Newmark time integration method is adopted for the step-by-step dynamic analysis.

• Journal of Yeungnam Medical Science
• /
• v.8 no.1
• /
• pp.24-31
• /
• 1991

Epicanthoplasty was performed in 98 patients with the epicanthal fold. Epicanthal fold was classified into three categories-minimal degree, moderate degree, severe degree-according to its severity. In accurate anatomic dissection in medial canthal area, the pathologic mechanism of the formation of the epicanthal fold, I think, are not only the redundancy of skin, but also the early downward insertion of the preseptal and pretarsal portion of orbicularis oculi muscle. A new surgical technique is described for the correction of the epicanthal fold. The procedure is simple to perform and uniformly gives good results.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.2
• /
• pp.168-175
• /
• 1999

Unlike a general inverted pendulum system which is moved on the cart the proposed inverted pendulum system in this paper has an inverted pendulum which is moved on the two-degree-of-freedom parallelogram link. The dynamic equation of the pendulum system activated by the DD(Direct Drive)motor includes many nonlinear terms and has the high degree of freedoms. The problem is followed hat the exact mathmatical equations can not be analized by a general linear theory However the neural network trained by a simple learning method can control the dynamic system with hard nonlinearities. Learning procedure is the backpropagation algorithm with super-visory signal. The plant inputs obtained by the designed neural network in this paper can stabilize the pendu-lem and get the servo control. Experiment results have proce the effectiveness of the designed neural network controller.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.422-427
• /
• 2001

The component mode synthesis method allows the elastic deformation of each component in the flexible multibody system by a sum of modes and modal coordinates. This paper focuses on the selection of boundary conditions and deformation modes for redundantly constrained flexible components in mechanical system dynamics. The result of a flexible body dynamic analysis with only normal modes is used to identify proper boundary conditions of a static modes and a desired set of static modes which will be used in the final model. A simple four bar mechanism is used to explain the procedure and a space satellite with solar panels is analyzed using the proposed method.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1570-1575
• /
• 2004

In order to evaluate the performance of fire-fighting agents used to protect structures from heat and fire damages, the thermal characteristics of fire-protection foams are experimentally investigated. The current research focuses on the destruction of a fire-fighting foam subjected to heat radiation. A simple repeatable test for fire-protection foams subjected to fire radiation is developed. This test involves foam generation equipment, a fire source for heat generation, repeatable test procedures, and data acquisition techniques. Results of the experimental procedure indicated that each thermocouple within the foam responded in a similar manner and gradually to a temperature of $15^{\circ}C{\sim}20^{\circ}C$. At this point, each trace generally rises to a temperature of approximately $90^{\circ}C$. The temperature gradient in the foam as time passes increases with increased foam expansion ratio. In addition, it is determined that the temperature gradient along the foam for depth decreases with increased foam expansion ratio.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.207-227
• /
• 1991

The impact of the system reliability analysis to structural design is described in this paper and various methods for system reliability analysis developed up to the present are reviewed and discussed from the view point of their efficiency. The paper also includes the detailed formulation procedure of the, so called, extended incremental load method has applied to relatively simple structure to show its usefulness.