• ETRI Journal
• /
• v.24 no.5
• /
• pp.341-348
• /
• 2002

We propose an asymmetric sampled grating laser and a multi-wavelength laser array associated with it. Asymmetric sampling periods combined with an index shifter make it possible to use first order reflection for lasing operations. With the structure of our design, we achieved a simple fabrication procedure as well as a high yield without using complex and time-consuming e-beam lithography for multi-period gratings. We analyzed the effect of mirror coating by numerical analysis to improve single mode and power extraction performance. By using high reflection-antireflection coatings, we obtained high power extraction efficiency without degradation of the single mode property. For the multi-wavelength laser array, to gain wavelength control, we varied the sampling periods from one laser to an adjacent laser across the array. With this approach, we showed the feasibility of an array of up to 30 channels with 100 GHz wavelength spacing.

• ETRI Journal
• /
• v.29 no.4
• /
• pp.445-451
• /
• 2007

An adaptive modulation scheme is presented for multiuser orthogonal frequency-division multiplexing systems. The aim of the scheme is to minimize the total transmit power with a constraint on the transmission rate for users, assuming knowledge of the instantaneous channel gains for all users using a combined bit-loading and subcarrier allocation algorithm. The subcarrier allocation algorithm identifies the appropriate assignment of subcarriers to the users, while the bit-loading algorithm determines the number of bits given to each subcarrier. The proposed bit-loading algorithm is derived from the geometric progression of the additional transmission power required by the subcarriers and the arithmetic-geometric means inequality. This algorithm has a simple procedure and low computational complexity. A heuristic approach is also used for the subcarrier allocation algorithm, providing a trade-off between complexity and performance. Numerical results demonstrate that the proposed algorithms provide comparable performance with existing algorithms with low computational cost.

• Journal of Environmental Health Sciences
• /
• v.29 no.3
• /
• pp.1-8
• /
• 2003

The development of environmentally nontoxic or non-polluting antifouling additives that can be formulated in practical coating requires assay involving target organisms. Described here are the simple laboratory assays that have been developed using the barnacle, Balanus amphitrite, a common fouling organism found throughout temperate and tropical seas. One of the assays depends on synchronous year-round mass culture, the procedure for which is described, of nauplii larvae and cyprids larvae. The laboratory assays provided quantitative estimates of toxicity and settlement inhibition of the test compounds. Laurinterol (1), isolaurinterol (2), alpysinal (3), and aplysin (4) have been isolated from the Korean red alga Laurencia okamurae. Their structures were identified by spectral data in comparison with the literature data. Compounds 1-4 inhibited larval settlement of the barnacle B. amphitrite with EC$_{50}$ values of 0.18- 36 $\mu\textrm{g}$/ml. Com-pounds 2-4 showed larval toxicity against nauplii of the barnacle B. amphitrite with 5-10 $\mu\textrm{g}$/ml, while laurinterol (1) exhibited no toxicity at even 100 $\mu\textrm{g}$/ml. Therefore, laurinterol was expected as a promising natural antifoulant.t.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.121-126
• /
• 1998

A numerical optimization procedure is developed to find the inlet velocity profile that yields the most uniform epitaxial layer in a vertical MOCVD reactor. It involves the solution of fully elliptic equations of motion, temperature, and concentration; the finite volume method based on SIMPLE algorithm has been adopted to solve the Navier-Stokes equations. The overall optimization process is highly nonlinear and has been efficiently treated by the sequential linear programming technique that breaks the non-linear problem into a series of linear ones. The optimal profile approximated by a 6th-degree Chebyshev polynomial is very successful in reducing the spatial non-uniformity of the growth rate. The optimization is particularly effective to the high Reynolds number flow. It is also found that a properly constructed inlet velocity profile can suppress the buoyancy driven secondary flow and improve the growth-rate uniformity.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.13-14
• /
• 2003

Two different ${\kappa}-{\varepsilon}-\overline{{\nu}{\nu}}-f$ turbulence models together with the two-layer model are evaluated for natural convection in a rectangular cavity. The numerical problem and accuracy of the turbulence models are discussed. The original $\overline{{\nu}{\nu}}-f$ model suffers from the numerical stiffness problem when used with the segregate solution procedure like the SIMPLE algorithm, and a remedy for this problem is proposed. It is shown that original $\overline{{\nu}{\nu}}-f$ model best predicts the mean velocity, Reynolds stresses and the turbulent heat flux while the modified $\overline{{\nu}{\nu}}-f$ model (N=6) overpredicts the turbulent quantities.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.187-189
• /
• 2003

Almost all building/infrastructures made of composite materials are fabricated without proper design. Unlike airplane or automobile parts, prototype test is impossible. One cannot destroy 10 story buildings or 100-meter long bridges. People try to build 100-story buildings or several thousand meter long bridges. In order to realize "composites in construction", the following subjects must be studied in detail, for his design: Concept optimization, Simple method of analysis, Folded plate theory, Size effects in failure, and Critical frequency. Unlike the design procedure with conventional materials, his design should include material design, selection of manufacturing methods, and quality control methods, in addition to the fabrication method.on method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.367-375
• /
• 1990

A data structure representing 3-D objects was designed for the personal computer. It is very simple to be used in the personal computers which have small memory and low speed. A homogeneous transformation for developing 3-D objects was derived. Each developing procedure consists of five transformations : one translational-three rotational-one translational. Developing a solid is a creative work. So the results of developing vary with the order of surfaces to be developed. One method to reduce the length of seam was considered. The programs used in this study were written in Pascal and Assembly and a modeller that generates 3-D primitives was included. This program is an interactive dual-screen system. While all the menus in Korean are displayed at the monochrome monitor, the development figures with projective views are drawn at the color monitor. The program has wide applications for plate works.

• Journal of Mechanical Science and Technology
• /
• v.17 no.7
• /
• pp.966-977
• /
• 2003

This paper investigates how intentional mistuning of bladed disks reduces their sensitivity to unintentional random mistuning. The class of intentionally mistuned disks considered here is limited, for cost reasons, to arrangements of two types of blades (A and B, say). A two-step procedure is then described to optimize the arrangement of these blades around the disk to reduce the effects of unintentional random mistuning. First, a pure optimization effort is undertaken to obtain the pattern (s) of the A and B blades that yields small/the smallest value of the largest amplitude of response to a given excitation in the absence of unintentional random mistuning using Genetic Algorithm. Then, in the second step, a qualitative/quantitative estimate of the sensitivity for the optimized intentionally mistuned bladed disks with respect to unintentional random mistuning is performed by analyzing their amplification factor, probability density function and passband/stopband structures. Examples of application with simple bladed disk models demonstrate the significant benefits of using this class of intentionally mistuned disks.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1296-1301
• /
• 2002

In recent years, the pathology in the colon grows up annually since people of all ages prefer to have less fiber and more fat food. Therefore, the colonoscopy is generalized in developed countries. But it requires much time to acquire a dexterous skill to perform an operation and the procedure is painful to the patient. Therefore, some studies on the development of autonomous colonoscope are carried out. In this paper, we propose a new and simple locomotive mechanism that can be propelled by elliptic motion of a leg. It has several legs that have constant phase difference each other and those legs are disposed along the upper and lower of the body. In order to evaluate the performance of locomotive mechanism, we carried out the simulations of moving characteristics and the experiments in the colon of a dead pig.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.537-541
• /
• 2003

The synchronization of production-delivery artivities is one of crucial factors to get competitive collaboration benefits between the manufacturer and the retailor(s). There were several researches to study on He optimal delivery policy to minimize the total cost of integrated system of both manufacturer and retailor(s). In this research, we investigate the joint optimal shipment policy in case that a manufacturer produces multiple products sharing a single production facility in the manufacturer side and retailor(s) deploys JIT delivery pattern with equal-size shipment policy. We formulate this problem as a form of 'Common Cycle Approach' in classical ELSP (Economic Lot Scheduling Problem) and provide simple optimal solution procedure.