• Journal of dental hygiene science
• /
• v.16 no.1
• /
• pp.70-76
• /
• 2016

The objective of this study was to fabricate hydroxyapatite (HA) containing titania layer by HA blasting and anodization method to obtain advantages of both methods and evaluated biocompatibility. To fabricate the HA containing titania layer on titanium, HA blasting treatment was performed followed by microarc oxidation (MAO) using the electrolyte solution of 0.04 M ${\beta}$-glycerol phosphate disodium salt n-hydrate and 0.4 M calcium acetate n-hydrate on the condition of various applied voltages (100, 150, 200, 250 V) for 3 minutes. The experimental group was divided according to the surface treatment procedure: SM (simple machined polishing treatment), HA, MAO, HA+MAO 100, HA+MAO 150, HA+MAO 200, HA+MAO 250. The wettability of surface was observed by contact angle measurement. Biocompatibility was evaluated by cell adhesion, and cell differentiation including alkaline phosphatase activity and calcium concentration with MC3T3-E1 cells. The porous titanium oxide containing HA was formed at 150 and 200 V. These surfaces had a more hydrophilic characteristic. Biocompatibility was demonstrated that HA titania composite layer on titanium showed enhanced cell adhesion, and cell differentiation. Therefore, these results suggested that HA containing titania layer on titanium was improved biological properties that could be applied as material for dental implant system.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.5
• /
• pp.737-743
• /
• 1995

Background: Pneumonia is a frequent complication in patients undergoing mechanical ventilation, Quantitative culture of protected specimen brush(PSB) have shown satisfactory diagnostic accuracy for the diagnosis of ventilator-associated pneumonia. However PSB method is invasive, expensive, and require a bronchoscopic procedure. But endotracheal aspiration(EA) is simple and less expensive. The purpose of our study was to investigate the diagnosic value of EA quantitative cultures. Method: We studied 15 cases of ventilator-associated pneumonia(for >72h of mechanical ventilation) patients. Patients were divided into two diagnostic categories. Group I was the patients who were suspicious of clinical pneumonia, Group II was the patients for control. The obtained samples by EA and PSB were homogenized for quantitative culture with a calibrated loop method in all patients. Result: Using $10^3cfu/ml$, $10^5cfu/ml$ as threshold in quantitative culture of PSB, EA respectively, we found that EA quantitative cultures represented a relatively sentive(70%) and relatively specific (60%) method to diagnose the ventilator-associated pneumonia. Conclusion: Although EA quantitative cultures are less specific than PSB for diagnosing ventilator-associated pneumonia. EA quantitative cultures correlated with PSB quantitative culture in patients with clinical pneumonia and may be used to treat these patients when bronchoscopic procedures are not available.

• International Journal of Knowledge Content Development & Technology
• /
• v.10 no.3
• /
• pp.33-50
• /
• 2020

Knowledge recipes are packages of knowledge which arise from the process of combining the knowledge assets in the organization in distinctive ways. This involves converting them into useful outputs which are the ideal core competitive advantage enablers for companies. The major objective of this study was to propose a knowledge recipe for financial-sector state corporations in Kenya. The study adopted a convergent parallel mixed methods research design. Quantitative and qualitative data were collected using questionnaires and key informant interviews. The target population of the study was 1574 respondents drawn from all financial state corporations. A multistage sampling technique was used for the study. The first phase involved purposive sampling of the organizations to be studied whereby the four state corporations namely: Capital Markets Authority, Competition Authority of Kenya, Kenya Investment Authority, and Kenya Revenue Authority were identified. The second phase entailed stratified sampling of the respondents in three strata namely senior management team, knowledge management team, and general staff. The authors used a census of all senior management team and knowledge management staff while a simple random sampling technique was used for the general staff. By use of the Krejcie and Morgan table, the actual sample size was 358 respondents from all the four organizations. Data were collected using questionnaires and interview schedules. The qualitative data were analyzed using content analysis while the quantitative data were analyzed by the use of Ms. Excel and VOSviewer and presented using pie charts, bar graphs, and tables. The response rate for this study was 257 (72%). The study revealed that while most employees in the financial sector organizations understand their knowledge needs, knowledge types, knowledge uses and knowledge gaps, they do not have a universal knowledge recipe to facilitate effective knowledge management in their organizations. Consequently, the authors propose a universal knowledge recipe for the state corporations in the financial sector in Kenya. The ingredients of the recipe are legal-knowledge (18%), financial knowledge (15%), administrative knowledge (11%), best practice (10%), lessons learnt (8%), human resource knowledge (8%), research and statistics knowledge (7%), product knowledge (6%), policy and procedure knowledge (5%), ICT knowledge (4%), investor knowledge (3%), markets knowledge (2%), general knowledge (2%) and regulatory framework knowledge (1%).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.585-593
• /
• 2010

Geographic routing has been considered as an efficient, simple, and scalable routing protocol for wireless sensor networks since it exploits pure local location information instead of global topology information to route data packets. Geographic routing requires the sources nodes to be aware of the location of sinks. Most existing geographic routing protocols merely assume that source nodes are aware of the locations of sinks. How can source nodes get the locations of sinks was not addressed in detail. In this paper, we propose a sink location service via circle path for geographic routing in wireless sensor networks. In this scheme, a sink sends a Sink Location Announcement (SLA) message along a circle path, and a source node sends a Sink Location Query (SLQ) message along a straight path that certainly passes through the circle path. By this way we can guarantee the SLQ path and SLA path have at least one crossing point. The node located on the crossing point of the two paths informs the source node the sink location. This procedure can correctly work in any irregular profile sensor networks such as network that has holes or irregular shape by some rules. Simulation results show that our protocol is superior to other protocols in terms of energy consumption and control overhead.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.6
• /
• pp.521-527
• /
• 2004

Cimetidine is a histamine $H_2-receptor$ antagonist, used for the treatment of endoscopically or radiographically comfirmed duodenal ulcer, pathologic GI hypersecretory conditions, and active, benign and gastric ulcer. Simple method for determining cimetidine in human plasma has been developed and validated. The analytical procedure for cimetidine showed a linear relationship in the concentration ranges from $0.05\;to\;5\;{\mu}g/ml$. Coefficient of variance (CV, %) for intraday and interday validation and relative error (RE, %) were less than ${\pm}15%$. Based on this analytical method, the bioequivalence of two cimetidine 400 mg tablets, reference (Tagamet 400 mg) and test drug (Sinil CIMETIDINE 400 mg) was evaluated according to the guidelines set by the Korea Food and Drug Administration (KFDA). Release of cimetidine from the tablets in vitro was tested using KP VIII Apparatus II with various dissolution media (pH 1.2, 4.0, 6.8 buffer solutions and water). Twenty-four healthy volunteers, $21.38{\pm}1.86$ years in age and $68.71{\pm}8.68\;kg$ in body weight, were divided into two groups and a randomized $2{\times}2$ cross-over study was performed. After oral administration of a tablet containing 400 mg of cimetidine, blood samples were taken at predetermined time intervals and concentrations of cimetidine in plasma were determined using HPLC equipped with UV detector. The dissolution profiles of the two tablet formulations were very similar at all dissolution media. In addition, pharmacokinetic parameters such as $AUC_t$ and $C_{max}$ were calculated and ANOVA was employed for the statistical analysis of parameters. The results were revealed that the differences in $AUC_t$ and $C_{max}$ between the two tablets were 4.17 % and 0.97% respectively. At 90% confidence intervals, the differences in these parameters were also within ${\pm}20%$. All of the above mentioned parameters have met the criteria of KFDA guidelines for bioequivalence, indicating that the test drug tablet (Sinil CIMETIDINE tablet) is bioequivalent to Tagamet 400 mg tablet.

• Journal of Embryo Transfer
• /
• v.30 no.3
• /
• pp.207-211
• /
• 2015

Many pronuclear stage eggs were used to generate transgenic mice (Tg) by microinjection. In this study, we used in vitro fertilized mouse eggs, followed by ultrarapid freezing to establish a simple procedure for production of Tg mice. We produced in vitro fertilized mouse eggs and cryopreserved them by ultrarapid freezing method. A total of 139 cryopreserved-thawed pronuclear eggs, of which 101 (72.6%) were survived following microinjection of chicken ${\beta}-actin$ promoter-driven firefly improved luciferase cDNA (${\beta}-act/luc^+$) and were transferred into 5 recipients. All recipients became pregnant and gave birth to a total of 15 (14.8%) pups. As a control, same DNA construction (${\beta}-act/luc^+$) was also injected into 450 in vitro fertilized eggs, of which 338 (75.1%) were survived and then were transferred into 14 recipients. Eleven (78%) mice became pregnant and littered a total of 54 (19.1%) pups. Southern blotting analysis of Tg mice indicated that one (1/15, 6.6%) and three (3/54, 5.5%) transgenic mice were production from cryopreserved and in vitro fertilized eggs, respectively. All Tg mice produced from both eggs showed the expression of improved luciferase gene. These results indicated that efficiency of produced of Tg mice from cryopreserved eggs was comparable to that from in vitro fertilized eggs. Furthermore, it is suggested that microinjection of transgene into in vitro fertilized eggs cryopreserved by ultrarapid freezing is an easy and conveniently method for production of Tg mice.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.11-19
• /
• 2000

In order to predict the performance of biological wastewater treatment plant, the kinetic parameters and stoichiometric coefficient must be known. The theories and experimental procedures for determining the biological kinetic parameters were discussed in this study. Respirometric analysis in the batch reactor was carried out for the experimental assessment of kinetic parameters. A simple procedure to estimate kinetic parameters of heterotrophs and autotrophs under aerobic condition was presented. The difficulties in the interpretation of COD and VSS measurements encouraged the conversion of respirometric data to growth data. Maximum specific growth rate, yield coefficient, half saturation constant and decay rate of heterotrophic biomass were obtained from OUR(Oxygen Uptake Rate) data. Maximum specific growth rate of autotrophic biomass was obtained from the increase of nitrate concentration. The aim of this paper is to estimate the kinetic parameters of heterotrophic and autotrophic biomass by means of the respirometric analysis of activated sludge behavior in the batch reactors. These procedures may be used for the activated sludge modeling with complex kinetic parameters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.679-685
• /
• 2004

Although the electrophoretic deposition method has the advantage of simple processing procedure, less fabrication facilities, and easier control for deposition thickness and wire length, providing economical and technical merits, it also has the disadvantages of cracking and porosity phenomena, requiring an improved processing method for higher particle density and constant particle orientation. we have developed an optimization method to increase the particle density and to unify its orientation, and have performed a study to overcome the cracking and porosity problems in the fabricated superconductor. In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternate voltage vertically has been developed for the first time and applied to the electrophoretic deposition process. The applied alternate electric field caused a force to be exerted on each YBCO particle and resulted in a rotation of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. We name this process as the shaky-aligned electrophoretic deposition method. For commercial utilization and efficiency, in this dissertation, alternating voltage of 60 Hz and 25 ∼ 120 V/cm was proposed to apply it as a subsidiary source for shaky-flow deposition so that the fabricated thin film showed uniform surface morphology with less voids and cracks and Tc,zero of 90 K and the critical current density of 3419 A/$cm^2$.

• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.17-22
• /
• 2020

Light Naphtha is distillated from crude oil unit and separated into the methane, ethylene and propylene by boiling point difference in sequence. This separation is conducted using a series of binary-like columns. This separation method is known that the energy consumed in the reboiler is used to separate the heaviest components and most of this energy is discarded as vapor condensation in the overhead cooler. In this study, the first two columns of the separation process are replaced with the Petlyuk column. A structural design was exercised by the stage computation with ideal tray efficiency in equilibrium condition. Compared with the performance of a conventional system of 3-column model, The design outcome shows that the procedure is simple and efficient because the composition of the liquid component in the column tray was designed to be similar to the equilibrium distillation curve. The performance of the new process indicates that an energy saving of 12.1% is obtained and the cost savings of 44 million won per day based on gross domestic product is reduced under same total number of trays and the initial investment cost is saved.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.193-204
• /
• 2007

Deformation strength($S_D$) is a property which shows relatively good correlation with rut resistance of asphalt mixtures at high temperature. The Asphalt Pavement Analyzer (APA) is widely used as an equipment for estimating rut resistance of asphalt mixtures. The APA was used as corresponding property of the $S_D$ to estimate rutting resistance of asphalt mixtures. Many data were collected to establish the correlation of $S_D$ with APA. For $S_D$ test, the specimen is submerged into the $60^{\circ}C$ water for 30 minutes before applying a vertical load at the speed of 50mm/min to obtain peak load (P) and deformation (y) for $S_D$ calculation. For the same materials, APA test was performed. Relation of the $S_D$ with APA rut depth was evaluated using regression analysis. The $R^2$ value was 0.76, indicating this simple test procedure being a possible method for predicting deformation resistance of asphalt concretes at high temperature. It was also shown that, using the regression model, minimum value(s) of $S_D$ of surface course asphalt mixture or binder course for a particular road level can be determined. The limit values may be possible to use as cut-off value(s) of asphalt mixtures for the layer after further elaborated studies.