Kim, Min-Suk;Min, Hyungi;Kim, Jeong-Gyu;Koo, Namin;Park, Jeong Sik;Bak, Gwan In
Korean Journal of Environmental Agriculture
/
v.33
no.1
/
pp.1-8
/
2014
BACKGROUND: Recent studies using many amendments for heavy metal stabilization in soil were conducted in order to find out new materials. But, the studies accounting for the use of appropriate amendments considering soil pH remain incomplete. The aim of this study was to investigate the effects of initial soil pH on the efficiency of various amendments. METHODS AND RESULTS: Acid soil and alkali soil contaminated with heavy metals were collected from the agricultural soils affected by the abandoned mine sites nearby. Three different types of amendments were selected with hypothesis being different in stabilization mechanisms; organic matter, lime stone and iron, and added with different combination. For determining the changes in the extractable heavy metals, water soluble, Mehlich-3, Toxicity Characteristic Leaching Procedure, Simple Bioavailability Extraction Test method were applied as chemical assessments for metal stabilization. For biological assessments, soil respiration and root elongation of bok choy (Brassica campestris ssp. Chinensis Jusl.) were determined. CONCLUSION: It was revealed that lime stone reduced heavy metal mobility in acid soil by increasing soil pH and iron was good at stabilizing heavy metals by supplying adsorption sites in alkali soil. Organic matter was a good source in terms of supplying nutrients, but it was concerning when accounting for increasing metal availability.
Purpose: We reconstructed the skin defect of lower legs exposing muscles, tendons and bone with fasciocutaneous sural artery flap and report our cases. Materials and Methods: Between March 2005 and September 2006, 8 cases of skin defect were reconstructed with fasciocutaneous sural artery flap. Defect site were 4 case of ankle and foot and 4 cases of lower leg. The average defect size was $4{\times}4\;cm^2$. There were 5 men and 3 women and mean age was 52.2 years. We evaluated the viability of flap, postoperative complication, healing time, patient's satisfaction. Results: There was no flap failure in 8 cases. But recurrent discharge in 2 cases was healed through several times adequate debridement and delayed suture without complication. Flap edema may be due to venous congestion was healed through leg elevation and use of low molecular weight heparin. Mean time to heal the skin defect was 4 weeks. No infection and recurrence in follow up period. Cosmetic results as judged by patients were that 5 cases are good and 3 cases are fair. Conclusion: Sural artery flap is good treatment method among the numerous methods in the cases of skin defect, with soft tissue exposed, which is not covered with debridment and skin graft. Sural artery flap is useful method for the skin defect of lower legs because it is simple procedure, has constant blood supply and relatively good cosmetic effect.
In this paper, we propose an automatic melody composition system that can generate a sophisticated melody by adding non-harmony tone in the given chord progression. An overall procedure consists of two steps, which are the rhythm generation and melody generation parts. In the rhythm generation part, we designed new fitness functions for rhythm that can be controlled by a user setting parameters. In the melody generation part, we designed new fitness functions for melody based on harmony theory. We also designed evolutionary operators that are conducted by considering a musical context to improve computational efficiency. In the experiments, we compared four metaheuristics to optimize the rhythm fitness functions: Simple Genetic Algorithm (SGA), Elitism Genetic Algorithm (EGA), Differential Evolution (DE), and Particle Swarm Optimization (PSO). Furthermore, we compared proposed genetic algorithm for melody with the four algorithms for verifying performance. In addition, composition results are introduced and analyzed with respect to musical correctness.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2018.06a
/
pp.67-67
/
2018
The 5xxx series aluminum alloys are recently used in not only marine system but also automotive area because of a low density material, good mechanical properties and better resistance to corrosion. However, Aluminum alloys are less resistant than the purest aluminum such as 1xxx aluminum alloy. Electrochemical anodization technique has attracted in the area of surface treatment because of a simple procedure, a low-cost efficiency than other techniques such as lithography and a large volume of productivity, and so on. Here, The relationship between the corrosion behavior and the thickness of aluminum anodic oxide have been studied. Prior to anodization, The 5052 aluminum sheets ($30{\times}20{\times}1mm$) were degreased by ultra-sonication in acetone and ethanol for 10 minutes and eletropolished in a mixture of perchloric acid and ethanol (1:4, volume ratio) under an applied potential of 20V for 60 seconds to obtain a regular surface. During anodization process, Aluminum alloy was used as a working electrode and a platinum was used as a counter electrode. The two electrodes were separated at a distance of 5cm. The applied voltage of anodization is conducted at 40V in a 0.3M oxalic acid solution at $0^{\circ}C$ with appropriate magnetic stirring. The surface morphology and the thickness of AAO films was observed with a Scanning Electron Microscopy (SEM). The corrosion behavior of all samples was evaluated by an open-circuit potential and potentio-dynamic polarization test in 3.5wt% NaCl solution. Thus, The corrosion resistance of 5052 aluminum alloy is improved by the formation of an anodized oxide film as function of increase anodization time which artificially develops on the metal surface. The detailed electrochemical behavior of aluminum 5052 alloy will be discussed in view of the surface structures modified by anodization conditions such as applied voltages, concentration of electrolyte, and temperature of electrolyte.
Sung-Ho, Lee;Young Goel, Shon;Soo In, Lee;Zhoo Hyeon, Kim;Moo Je, Cho
KOREAN JOURNAL OF CROP SCIENCE
/
v.42
no.5
/
pp.615-625
/
1997
An efficient protocol for plant regeneration from protoplasts of the indica rice variety IR43 has been developed. The procedure involved plating of embryogenic suspension-derived protoplasts on the surface of a filter membrane overlaying agarose-embedded feeder cells. Lolium multiflorum cell suspensions were preferable to these of Oryza ridleyi as feeder cells and Lolium suspensions supported colony formation from up to 0.68% of the protoplasts, depending on the age of cell suspensions. Plant regeneration frequency was significantly improved by using maltose alone or in a 1:1(w/w) combination with sucrose as carbohydrate source and a simple dehydration treatment using a high concentration of agarose in the regeneration medium. Medium containing maltose or maltose mixed with sucrose increased the plant regeneration frequency compared with medium containing sucrose alone. The plant regeneration frequency was increased to 30.7 to 70.7% following dehydration treatment, while the non-treated controls showed a regeneration frequency of 3.1 to 30.6%. Protoplast-derived plants were transferred to the glasshouse, flowered with morphologically normal.
Moon Young Lae;Yoon Tae Hyun;Park Joon Kwang;Oh Seo Jin
Clinics in Shoulder and Elbow
/
v.2
no.2
/
pp.120-125
/
1999
Objectives : To evaluate the effects of arthroscopic acromioplasty and debridement for partial thickness articular side rotator cuff tears, Method: We divided 97 patients into 2 groups according to treatment protocol, with both groups having confirmed intra-articular partial tears of the rotator cuff. In group Ⅰ, we debrided the frayed and fibrotic cuff margin while in group II, we performed subacromial decompression in addition to debridement. After the surgery we checked all the patients with the modified UCLA shoulder rating scale. Results: The follow-up observation 12 months after surgery revealed that 44 patients in group I were rated as excellent in 32 cases, good in 10 cases, fair in 1 case, and poor in one case, while 53 patients in group II, were rated as excellent in 38 cases, good in 17 cases, and fair in 2 cases. Twenty-four month after surgery we observed that patients in group I were rated as excellent in 23 cases, good in 16 cases, fair in 4 cases, and poor in 1 case, while patients in group II were rated as excellent in 34 cases, good in 17 cases, and fair in 6 cases. Conclusion: The use of acromioplasty on partial thickness tears of rotator cuff, even in the cases of intra-articular nature, is preferable to the procedure performed without it.
Jeolpyon rice cake was made using buckwheat flour and measured its texture, color and sensory properties as follows. According to the amylograph guage test, rice flour was the highest in its initial pasting temperature $82.5^{\circ}C$. With 5% addition of buckwheat flour, it came to be $81.0^{\circ}C$ and became $79.5^{\circ}C$ at 10%, and $78.0^{\circ}C$ at 15%, which was lower than the control. And its maximum temperature at peak viscosity showed at $87^{\circ}C$ and it showed no difference in temperature according to the amount of buckwheat flour. The maximum value (peak point) was 690 BU in control and it increased following to the added amount of buckwheat flour, 710 BU in adding buckwheat flour 10% and 740 BU in 15% of buckwheat flour. In relating to the changes of texture, it became hard by the added amount of buckwheat flour because of decreasing cohesiveness and springiness, but increasing gumminess and brittleness. The hardness increased by adding with buckwheat flour through the freeze preserving period. But adding buckwheat flour of 10% decreased the hardness. Regarding the color value, lightness decreased by the adding buckwheat flour, but a and b value increased. As a result of the sensory analysis about Jeolpyon prepared with buckwheat flour, the most favoured ratio of buckwheat flour for color and preference was at 10%. In case of 15%, it was a little dark so it was not desirable. Based on the above test, the best combination ratio of buckwheat for Jeolpyon was 10%. And Jeolpyon can be easily made at home as well as mass production due to relatively simple making procedure.
Chronic diabetic patients need to sample capillary blood for monitoring and controlling the blood sugar level. Frequent sampling requires to minimize pain during skin puncture. The present study developed mechanisms to minimize pain with effective sampling procedure. which consisted of tapered spring, guiding tunnel, and 30G needle Penetration depth was limited to within 2mm for pain reduction as well as for safety. Simple no-reuse mechanism also prevented the cross-patient and secondary infection possibility. Clinical experiments demonstrated the best convenience and safety with minimal pain in the diabetes, normal, and nursing students groups. Sing1e blood sampling was enough for successful blood sugar test by portable analyzer. The present sing1e use auto-lancet should be of great convenience in frequent capillary blood sampling for the diabetes.
Specially, the character in the kids animation is the fundamental visual element, and also has the high value which is to connect to various related businesses. The main purpose of this study is the analysis for character's appearance by the basic plane figure, and it has studied on the authority of recognition capability which is to catch the simple shape rapidly and clearly rather than complex shape. For this study, I established the standard of analysis and then applied that to the characters which were selected in broadcasting domestic kids animation on EBS. Through this procedure, I analyzed character's appearance with the distribution chart. As the result, the circular and oval shapes are the most frequently used shapes for character's appearance. Finally, I expect the result of this study could be one of the design index for the character creation in practical environment.
Purpose: We reconstructed the skin defect of hands exposing tendons and/or bone with distally based ulnar artery flap and report our cases. Materials and Methods: Between March 2005 and September 2007, 6 cases of skin defect were reconstructed with distally based ulnar artery flap. Defect site were 5 cases of hand dorsal side and 1 case of hand volar side. The average defect size was $3{\times}3\;cm^2$. There were 4 men and 2 women and mean age was 55.5 years. We evaluated the viability of flap, postoperaive complication, healing time, patient's satisfaction. Results: There was no flap failure in 6 cases. But 1 case with recurrent discharge was healed with several times adequate debridement and delayed suture. 1 case with flap edema which might be due to venous congestion was healed with hand elevation and use of low molecular weight heparin. Mean time to heal the skin defect was 4 weeks. No infection and recurrence was found in follow up period. Cosmetic results as judged by patients were that 3 cases are good and 3 cases are fair. Conclusion: Distally based ulnar artery flap is good treatment method among the numerous methods in the cases of skin defect, with soft tissue exposed, which is not covered with debridment and skin graft. Distally based ulnar artery flap is useful method for the skin defect of hands because it is simple procedure, has constant blood supply and relatively good cosmetic effect.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.