• 대한소아치과학회지
• /
• 제26권1호
• /
• pp.53-61
• /
• 1999

Newley developed dentin bonding system which contains self-etching primer performed the removing of smear layer and etching procedure at once. So, it make possible more simple and shorter working time, the stronger bonding strength than conventional dentin bonding system. Cavities were prepared in the buccal and lingual surface of 30 extracted primary molars, and randomly assigned into three equal groups of 10 each. All cavities were filled with Z-100 composite resin following manufacturer's specifications after priming of three different dentin bonding system. Specimens stored for 7 days in 37 degree C water, thermocycled for 1000 cycles between 5 degree C and 55 degree C, immersed in 50% silvernitrate solution for 24 hours, and embedded in resin before being sectioned longitudinally. Data were analyzed by t-test and ANOVA. Mac-Bond II and Clearfil Linear-Bond II showed less microleakage at the occlusal and gingival margins compared to Scotchbond Multi Purpose. All dentin bonding systems showed significantly less microleakage at the occlusal margins compared to the gingival margins. But, there were no significantley difference between each group.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.388-390
• /
• 2004

In this paper, we performed the implementation of image transmission server system using embedded system that is for the specified object and easy to install at any places and move to wherever. Since the embedded system has lower capability than PC, we have to reduce the quantity of calculation and transmission. The image compression like JPEG, needs that the server calculates for making compressed image, makes the server carry the load. So we compresses the image at the server and transmit the codes to the clients connected, then the received codes from server are decoded and displayed at the clients. In this process to make the image compression and transmission effectively, we decrease the procedure as simple as possible to transmit the data in almost real-time. We used the Redhat linux 9.0 OS at the host PC and the target board based on embedded linux. The image sequences are obtained from the camera attached to the FPGA board with ALTERA chip. For effectiveness and avoiding some constraints, we made the device driver. Generally the image transmission server is PC, but using the embedded system as a server makes the server portable and cheaper than the system based on PC.

• 대한교통학회지
• /
• 제24권1호
• /
• pp.97-108
• /
• 2006

현재 우리나라에서는 버스 노선의 정류장 수 및 간격 산정을 위해 전문가의 주관적인 판단에 의존하는 경우가 많다. 좀 더 객관적인 절차를 통해 신뢰성 있는 결과를 얻기 위해 최적 정류장 수 및 간격을 구하는 기존 모형들을 살펴보았지만 하차수요와 임의적인 수요분포를 고려하지 못한다는 한계점을 안고 있었다. 본 연구는 기존 모형들의 이러한 한계를 인식하고 수요를 승차와 하차로 구분하고 그 분포에 라라 일정한 구간별로 서로 다른 최적 정류장 수와 간격을 탄력적으로 산출해 낼 수 있는 모형을 정립하였다. 정립된 모형을 다양한 수요분포를 가지는 간단한 예제노선에 적용해본 결과 승차 혹은 하차수요에 비례하여 구간별 정류장 수가 탄력적으로 산출됨을 알 수 있었다.

• 한국전산유체공학회지
• /
• 제4권1호
• /
• pp.19-26
• /
• 1999

This paper describes a numerical method for predicting the incompressible unsteady laminar three-dimensional flows with free-surface. The Navier-Stokes equations governing the flows have been discretized by means of finite-difference approximations, and the resulting equations have been solved via the SIMPLE-C algorithm. The free-surface is defined by the motion of a set of marker particles and the interface behaviour was investigated by means of a "Lagrangian" technique. Using the GALA concept of Spalding, the conventional mass continuity equation is modified to form a volumetric or bulk-continuity equation. The use of this bulk-continuity relation allows the hydrodynamic variables to be computed over the entire flow domain including both liquid and gas regions. Thus, the free-surface boundary conditions are imposed implicitly and the problem formulation is greatly simplified. The numerical procedure is validated by comparing the predicted results of a periodic standing waves problems with analytic solutions. The results show that this numerical method produces accurate and physically realistic predictions of three-dimensional free-surface flows.

• 한국임상수의학회지
• /
• 제13권2호
• /
• pp.153-157
• /
• 1996

Ketosis can exist in both clinicla and subclinical forms. Detection of the subclinical form of ketosis by the use of a nitroprusside based test powder gas been shown to be a relatively simple and reliable procedure. Howere, very liffle is known about the indcidence or prevalence of the subclinical ketosis in Korea. In the present study, samples of urine taken from 288 dairy cows in Chonnam area were examined to demonstrate the presence of ketone bodies, using ross test. All the cows were within 4 weeks either before or after parturition. The gerd size was from 10 to more than 100 cows, and the cows did not show any clinical signs of ketosis. Of the 288 cows, 85 (29.5%) were positive to Ross test; of the positive cases 42.4% were +, 44.7% were ++, and the remaining 12.9% were +++. The prevalence increased from 3rd parity, peaked at 6th parity and thereafter decreased. The prevalence was higher after parturition than before parturition, with the highest occurrence during the 2nd week after calving. The prevalence was higher during winter. Also cows kept indoor throughout the year showed higher occurrence of the subclinical ketosis. The subclinical ketosis did not affect the specific gravity of the urine; however, increasing amount of ketone bodies in the urine decreased the pH of urine.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.37.1-37.5
• /
• 2016

Background: The dimensions and shape of the forehead determine the esthetics of the upper third of the face. Korean young people consider a broad and smooth, rounded forehead more attractive. As a result, frontal augmentation becomes more popular in patients with dentofacial deformities. Various surgical procedures and materials have been used in frontal augmentation surgery, with associated advantages and disadvantages. Silicone is a good candidate for frontal augmentation. The author presents two cases of esthetic frontal augmentation with a prefabricated silicone implant in female patients with dentofacial deformities. Case presentation: In case 1, a 24-year-old female patient underwent frontal augmentation surgery with simultaneous maxillomandibular and zygomatic osteotomies to correct facial asymmetry. A silicone implant was fabricated preoperatively using a positive template stone mold of her forehead. In case 2, a 23-year-old female patient underwent total facial contouring surgery including frontal augmentation for improved facial esthetics. A computed tomography (CT)-guided rapid prototype (RP) model was used to make the silicone implants. The operative procedure was safe and simple, and the silicone implants were reliable for a larger degree of frontal augmentation. Six months later, both patients had recovered from the surgery and were satisfied with their frontal shape and projection. Conclusions: Frontal augmentation with silicone implants can be an effective adjuvant strategy to improve facial esthetics in patients with a flat and narrow forehead who undergo orthognathic reconstruction or total facial contouring surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권2호
• /
• pp.161-163
• /
• 2005

In the reconstruction of the hard tissue defect of the oral cavity, the usefulness of the chin bone graft, one of the intraoral donor site, is gradually increased. The advantages include reduced resorption rate after graft due to its membranous bone nature, relatively ease to harvest under local anesthesia, reduced operative time because of the same operative field, decreased morbidity, and relatively large amount of bone can be harvested compared to other intraoral donor site. It has also postoperative complications including paresthesia of the lip or chin area, discomfort of lower anterior teeth, and facial swelling around chin area. Of these complications, facial swelling occurs more frequently, is more severe as a early postoperative discomfort, and prevents fast recover of patient's social activity since this procedure is generally accomplished in the outpatient base under local anesthesia. So we applied a modified " gull-wing" type incision to minimize this complication, and now we report this simple but effective surgical technique with clinically favorable result.

• KSBB Journal
• /
• 제15권4호
• /
• pp.342-345
• /
• 2000

식물세포배양으로부터 peroxidase를 대량 생산하기 위한 분리/정제 공정 으로서 세포를 파쇄하고 크로마토그래피 전처리로서 활성백토를 적용하였다. 활성백토는 미세한 세 포 조각 뿐만 아니라 여려가지 불순불을 선택적으로 흡착 하는 성질을 나타내었으며, 이를 통하여 효과적으로 정제 공정을 진행할 수 있었다 흡착을 통한 전처리 후 한외여 과장치를 이용하여 농축을 실시 하였으며, DEAE-Sepharose F FF를 이용한 크로마토그래피를 통해 정제가 이루어졌다. 활성을 나타내는 용액을 탈염, 농축 후 동결 건조하였다. 이 공정은 상업화에 필요한 대량 정제를 가능하게 하였으며 수율과 정제비용 측면에서 상당히 경제적인 공정임을 입증하였다, 활성백토를 이용한 흡착공정은 다른 효소 및 단백질의 경제적인 대량정제에 적용될 수 있으리라 기대된다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권1호
• /
• pp.1-6
• /
• 2004

The human chemokine, the short version of leukotactin-1(shLkn-1;molecular weight=7.2 kD and 66 amino acids), was expressed and secreted into a culture medium using the me-thylotrophic yeast, Pichia pastoris. The recombinant shLkn-1 was purified from the culture supernatant using a simple two-step procedure consisting of cation exchange and reverse phase chromatography(RPC), in which shLkn-1 was highly purified (99.5%) with a high recovery yield of 82.7%. The C-terminal truncated derivative of shLkn-1 was found in the supernatant and was separated by RPC. The physicochemical properties of the purified shLkn-1 were verified to be the same as expected. The biological activity of the purified recombinant shLkn-1 was also quantified using a chemotaxis assay. It was observed that the recombinant shLkn-1 had the maximum migration activity at a concentration of 10nM, as potent as MIP-1${\alpha}$.

• Journal of Mechanical Science and Technology
• /
• 제16권12호
• /
• pp.1583-1593
• /
• 2002

This paper discusses the model validation and vibration suppression of an AMB flexible rotor via additional LQG controller. The main difficulty in the vibration suppression of the flexible rotor using AMB is to realize a controller that can minimize resonance without injuring the stabilized rigid modes. In order to solve this problem, simple scheme for system modeling and controller design are developed. Firstly, the AMB flexible rotor is stabilized with a PID controller, which leads to a new stable rotor-bearing system. Then, authors propose the model validation procedure using measured open-loop frequency responses to obtain an accurate model of the AMB flexible rotor system. After that, LQG controller with modal weighting is designed to suppress resonances of the stable rotor-bearing system. Due to the poor controllability and observability of flexible modes compared to rigid ones, balancing of two Gramians is prerequisite for the fair LQG controller design. Simulation with step disturbance and experimental results of unbalance response up to 10,000 rpm verified the effectiveness of the proposed scheme.