• 한국지하수토양환경학회지:지하수토양환경
• /
• 제7권4호
• /
• pp.59-67
• /
• 2002

분산지수는 해수침투 범위를 파악하기 위한 수리동역학적 모델링을 실행하는데 필요한 매개변수이며. 이를 현장실험으로 구하기 위해서는 많은 시간과 비용을 필요로 하기 때문에 종종 기존의 실험과 이론적 연구에서 제시된 것을 이용한다. 그러나 그 분산지수가 실제 대수층의 특성을 나타내지 못할 경우, 모델링 결과에 많은 오차가 발생할 가능성이 크다 본 연구에서는 수치모델링에서 모사된 해수침투 범위와 현장측정치 및 겉보기비저항 단면도를 비교하여 이용된 분산지수의 타당성을 검증하였다. 수치모델링 결과, Neuman의 종분산지수보다 Xu의 종분산지수를 적용한 TDS분포가 연구지역내 관측공과 모니터링 우물에서의 현장측정치와 비교하였을 때 더 유사한 값을 나타내었다. Xu의 분산지수를 이용한 수치모델링에서 해수침투 범위는 건기인 5월에는 TDS 1000mg/L 등치선이 해안에서 약 480m 지점에 위치하며, 7월에는 해안에서 약 390m 지점에 위치한다. 이 차이는 강우에 의한 수리경사의 계절적인 변화에 의해서 해수와 담수의 경계면이 7월에 약 90m 정도 해안쪽으로 더 이동하였기 때문에 나타났다. 겉보기비저항 단면도에서는 해수와 담수의 경계로서 15 ohm-m 등치선을 이용하여 해수침투 범위를 설정하였으며, 그 결과 해수침투 범위가 해안으로부터 약 450m 지점에 위치하였다. 이것은 Xu의 분산지수를 이용한 수치모델링에서 모사된 해수침투 범위와 유사한 결과이다. 따라서 수리동역학적 모델링에서 분산지수에 따라 해수침투 범위가 차이를 보이는데, 본 연구지역에서는 Xu의 공식을 이용하여 산출된 분산지수가 해수침투의 범위를 결정하는데 더 유효하였다.

• 대한전자공학회논문지
• /
• 제12권1호
• /
• pp.18-26
• /
• 1975

본 논문에서는 4-path 여파기로 구성된 대역폭 조정 대역통과 여파기를 실현하였으며, 그 여파기의 통과대역의 대역폭은 주파수에 의하여 조정된다. 본 여파기의 주파수 통과대역 특성은 전자결합 복합주 증폭기와 같고 통과대역의 중심주파수는 연속적으로 시킬 수 있다. 대역폭 조정의 범위는 복동주의 쌍봉특성의 경우와 단봉특성의 경우로 나누어 고찰하였다. 이 system의 진폭응답을 실측하여 대역폭 조정 이론을 뒷받침 하였으며 그 측정결과는 이론치와 잘 일치하였다. In this paper, a frequency controlled bandwidth adjustable bandpass filter consisting of 4-path system is precented. It is shown that this system has characteristics similar to ihose of the magneticuly coupled double tuned amplifier and the center frequency of the passband is able to be shifted contineolisly. The adjustable range of the bartdwidth of the filter system is anslyzed for she case of the double and single tuned characteristics. The experiment has been conducted to verify the theory of this system and the experimental resulis are in good agreement with the theoretically calculated values.

• 설비공학논문집
• /
• 제7권2호
• /
• pp.341-352
• /
• 1995

In this study, thermal parameters were measured and 213 occupants were also questioned in three office buildings located in Seoul during the summer season. Predicted mean vote-predicted percentage of dissatisfied(PMV-PPD) and standard new effective temperature(SET*) were used for evaluating Korean thermal sensation. The distribution of thermal sensation vote(TSV) and percentage of dissatisfied(PD) is very similar to that of PMV and PPD. By regression analysis, the following regression equation was obtained; TSV=0.339SET*-8.583. In this case, neutral temperature and comfort range are $25.3^{\circ}C$, $23.8{\sim}26.8^{\circ}C$ respectively. Present experimental results obtained from the field study is less sensitive to the temperature change than those obtained from the climate chamber study in Korea. But, thermal sensations are similar to each other near the neutral point. The neutral temperature and comfort range obtained by this experiment are higher than those of ANSI/ASHRAE Standard 55-1974 about $1.4{\sim}1.8^{\circ}C$.

• 한국가시화정보학회지
• /
• 제15권3호
• /
• pp.52-56
• /
• 2017

In this study, we investigate the flow characteristics of lift-type disk which behaves the up-down motion using the large eddy simulation (LES) and immersed boundary method (IBM). Also, we perform the noise analysis using pressure field at 1.35 m distance and reveal the cause of noise to observe the vortical structure analysis of flow result. It is observed that vortical structure and wind shear were generated at leading edge and tower with high velocity deficit and flow separation. High magnitude of flow noise was observed in low frequency range which is from 30 Hz to 60 Hz. It was observed that vortical structure at leading edge was generated in frequency range from 33.3 Hz to 41.6 Hz. Temporal characteristic in vortical structure at leading edge was similar to noise characteristics, having the similar frequency ranges.

• 한국공간구조학회논문집
• /
• 제19권4호
• /
• pp.95-102
• /
• 2019

In this study, the reliability of the analysis is evaluated by comparing the average wind pressure coefficient, RMS wind pressure coefficient and wind pressure spectrum with same condition of wind tunnel test which are calculated in the high-Reynolds number range of 1.2×10⁶, 2.0×10⁶ each for the typical curved shape dome structure. And it is examined by the reliability of analysis through Improved delayed detached Eddy Simulation(IDDES), which is one of the hybrid RANS/LES techniques that can analyze the realistic calculation range of high Reynolds number. As a result of the study, it was found that IDDES can be predicted very similar to the wind tunnel test. The distribution pattern of the wind pressure coefficient and wind pressure spectrum showed a similar compared with wind tunnel test.

• 한국유체기계학회 논문집
• /
• 제6권4호
• /
• pp.14-20
• /
• 2003

In this study an analysis of the flow characteristics in three types of turbo-fans for a vacuum cleaner was performed by using CFD. The characteristics of three models calculated for various rotating speed for flow rates are obtained and compared with measured data. The mixing plane approach is applied to compute the flow between impeller and diffuser. The results show that the model that is modified to reduce fan noise gives stable flow characteristics in operating range than the original model, with both models show similar performance characteristics at the range of high flow rate. Since in the modified model it takes much longer for an impeller blade to pass a diffuser blade than in the original model, and the peak pressure at BPF can be relieved, it is anticipated that the modified model give much lower noise level with similar performance than the original one, which remains to be verified by unsteady computation and measurements. The good agreement between the predictions and measurement results confirms the validity of this study.

• Journal of Astronomy and Space Sciences
• /
• 제15권1호
• /
• pp.163-174
• /
• 1998

To study the origin of organic matter in meteorite, terrestrial rocks which contain or-ganic compounds similar to the ones found in carbonaceous chondrites are studied and compared with Muchison meteorite. Hydrocarbon molecules were extracted by benzene and methanol from bituminous coal and oil shale and the extracts were partitioned into aliphatic, aromatic, and polar fractions by silica gel column chromatography. Carbon isotopic ratios in each fractions were analysed by GC-C-IRMS. Molec-ular compound identifications were carried by GC-MS Engine. Bituminous coal and oil shale show the organic compound composition similar to that of meteorite. Oil shale has a wide range of ${\delta}^{13}C,-20.1%_0~-54.4%_0$ compared to bituminous coal, $-25.2%_0~34.3%_0$. Delta values of several molecular compounds in two terrestrial samples are different. They show several distinct distributions in isotopic ratios compared to those of meteorite; Murchison meteorite has a range of ${\delta}^13C\;from\;-13%_0\;to\;+30%_0$. These results provide interpretation for the source and the formation condition of each rock, in particular alteration and migration processes of organic matter. Especially, they show an important clue whether some hydrocarbon molecules observed in meteorite are indigenous or not.

• 한국콘텐츠학회논문지
• /
• 제5권3호
• /
• pp.175-181
• /
• 2005

현재 제공되는 인터넷 서비스들의 동작 특성은 기존에 고려되던 트래픽 특성과는 완전히 다른 자기 유사성(Self-similarity)이라는 성질을 가진다는 것이 증명되었다. 자기 유사성은 장기간 의존성으로 표현되는데, 이것은 단기간 의존성 성질을 갖는 기존의 모델인 포아송(Poisson) 모델과는 상반되는 개념이다 따라서 차세대 통신망의 설계 및 디멘져닝을 위해서는 무엇보다도 데이터 트래픽의 주요 특성인 버스트성(Burstiness)과 자기유사성이 반영된 트래픽 모델이 요구된다. 여기서 자기유사성은 허스트 파라미터(Hurst Parameter)로 특성화 될 수 있다. 이러한 관점에서 본 논문에서는 데이터 트래픽 특성이 서로 다른 다수의 데이터 트래픽의 통합되어 통신망에 입력되는 경우 주요 파라미터인 허스트 파라미터의 변화를 다양한 환경 하에서 분석하였고 이를 시뮬레이션 결과와도 비교하였다.

• 대한화장품학회지
• /
• 제23권2호
• /
• pp.71-96
• /
• 1997

We have used a novel liquid surface forces apparatus to determine the variation of disjoining pressure with film thickness for dodecane-water-dodecane emulsion films. The LSFA allows measurement of film thicknesses in the range 5-100 nm and disjoining pressure from 0-1500 Pa. Disjoining pressure isotherms are given for films stabilised by the nonionic surfactnat n-dodecyl pentaoxyethylene glycol ether$(C_{12}E_5)$ and n-decyl-$\beta$-D-glucopyranoside($C_{10}- $\beta$-Glu)$ and the anionic surfactant sodium bis(2-ethylhexyl) sulphosuccinate(AOT) in the presense of added electrolyte. For $C_{12}E_5$ and AOT, the emulsion films are indefinitely stable even for the highest concentration of NaCl tested (136.7 Nm) whereas the $C_{10}-{eta}-Glu$ film shows coalescence at this salt concentration. For film thicknesses greater than approximately 20 nm with all three surfactants, the disjoining pressure isotherms are reasonably well described in terms of electrostatic and van der Waals, forces. For the nonionic surfactant emulsion films, the charge properties of the monolayers are qualitatively similar to those seen for foam films. For AOT emulsion films, the monolayer surface potentials estimated by fitting the isotherms are similar to the values of the zeta potential measured for AOT stabilised emulsion droplets. For thin emulsion films certain systems showed isotherms which suggested the presence of an additional repulsive force with a range of approximately 20 nm.

• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.115-128
• /
• 2004

In this study, optical and mechanical properties were investigated with 4 kinds of commercial dental enamels. As a result of EDS analysis $SiO_2,\;Na_{2}O,\;Al_{2}O_3\;and\;K_{2}O$ were the main components of commercial dental enamels. In case of H specimen, content of $SiO_2\;and\;K_2O$ were more than that of another specimens. Starting powder and fired specimens were glass ceramics which were consist of amorphous phase and leucite (crystalline) phase. Crystallization did not occurred during firing process, since the XRD peak intensity was similar between starting powder and fired specimens. As a result of differential thermal analysis, $T_g$ and crystalline temperature was varied with composition in the range of $548\sim576^{\circ}C$ and $735\sim780^{\circ}C$ respectively. 0.5mm thickness dental enamel specimens showed sufficient translucent properties. However, transmittance and reflectance were lower than 5% result from scattering due to the refractive index difference between glass and crystalline phase. 3 point bending strength was in the range of 73.9$\sim$101.8MPa which was similar or slightly higher than enamel of natural teeth and Vickers hardness was higher than enamel of natural teeth more than 100.