• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.771-776
• /
• 2005

In recent days, there is much interest in the biocidal activity of silver since silver is known to be safe and effective as disinfectant and biocidal material against coliforms and viruses. In particular, nano silted silver particles which can be used as effective biocidal material received more attention. Accordingly, it is important to investigate antimicrobial activity and mechanism of nano sized silver particles prepared in a cost-effective manner. In this study, nano sized silver particles were prepared via photoreduction of a silver salt ($AgNO_3$) in the bulk phase of $PEO_{20}-PPO_{70}-PEO_{20}$ (Pluronic 123) block copolymer The antimicrobial efficacy of silver nano particles against E. coli was investigated and compared with that of silver ion as the concentration of silver nano particles, pH ($5.6{\sim}8.2$), temperature ($4^{\circ}C{\sim}35^{\circ}C$) varied in aqueous system. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) was used to examine the nature of damaged microorganism with nano sized silver particles and silver ion. This study showed that antimicrobial efficacy of silver nano particles was approximately one twentieth than that of silver ion. It was more biocidal at higher pH in contrast with silver ion. In addition, nano silver particles was demonstrated to disrupt the outer membrane of E. coli, subsequently causing their aggregation. On the other hand, silver ion diffused into the cell damaging the cytoplasmic membrane without disrupting the outer membrane of E. coli.

• Advances in nano research
• /
• v.2 no.3
• /
• pp.147-155
• /
• 2014

Among the various nanoparticles reported for commercial applications, considerable interest has been generated by the use of silver nanoparticles. Owning to extremely small size, silver nanoparticles exhibit enhanced properties when compared with the bulk material. In this research work, silver nanoparticles were prepared by the reduction of silver salt with a reducing agent by a solvothermal method using different solvent mediums such as ethanol, hexane, toluene and acetone with water. The prepared silver nanoparticles were characterized systematically by X-ray diffraction (XRD), particle size analysis and scanning electron microscope (SEM). The results revealed the formation of pure silver phase and nano-sized particles. Among the different solvent mediums used, the silver nanoparticles prepared by hexane and water as solvent mixture resulted in very low particle size.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.45-50
• /
• 2008

The self assembled silver process and silver coating process after surface reforming for silica particle, were investigated to coat the silver to colloidal silica. The effects of silver amounts and reductant amounts on silver coating efficiencies were investigated. The silver coating process after surface reforming for silica particle using MPTS (3-Mercaptopropyl trimethoxysilane) and APTS (3-Aminopropyl trimethoxysilane), showed the higher coating efficiency and better antibacterial effect than the self assembled silver process.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2575-2580
• /
• 2010

We present a method for chemically reducing silver alkylcarbamate complex with hydrazine to synthesize silver nanocolloids in an organic solvent using polyvinylpyrrolidone (PVP) as the stabilizer. To determine the optimal conditions for preparing stable silver colloids of controlled size and shape, the silver 2-ethylhexylcarbamate (Ag-EHCB) complex, PVP, hydrazine, and 2-propanol solvent concentrations in the reaction mixture were varied. The initial colloid has a mean particle diameter of 5-80 nm, and it exhibits an absorption band with various shapes in the UV region with a maximum near 420 nm. UV-vis spectroscopy, TEM, and X-ray diffraction techniques were used to investigate the formation and growth process of the metallic silver nanocolloids.

• Tribology and Lubricants
• /
• v.17 no.3
• /
• pp.221-227
• /
• 2001

The effect of silver particles on the sliding behavior of bearing steels was studied experimentally by using a ball-on-disk tribometer. Tests were performed in ambient air, dry air and vacuum. Disks of AISI 52100 were silver-coated by a thermal evaporation method, and the effects of silver particle transfer on friction were analyzed. In order to understand further the mechanism of silver particle transfer and its effect on friction and wear, pre-compressed silver particles were artificially introduced into the friction interface and the results were compared to those of silver-coated specimens. Results showed that the introduced silver particles produced transfer layers and resulted in low friction. It also showed that this low friction is closely related to the characteristic behavior of transfer layers. Shakedown occurred at the friction interface affected the friction and wear.

• The Korean Fashion and Textile Research Journal
• /
• v.7 no.3
• /
• pp.277-282
• /
• 2005

This study focuses on the imported silver goods from Japan and investigates the backgrounds of importing, trade items, and the amount of the exchange. This study also investigates the effects of the importing silver on Chosun society. A large amount of silver was imported from Japan and the amount of imported silver reached its maximum in Chosun Dynasty. Japan, on the other hand, imported a large quantity of cotton cloth from Chosun Dynasty. Silver was imported mainly because of the sumptuous moods among the royal family and the aristocracy. The moods were spread out to general people who made them wish for the luxurious and expensive chinese goods. To buy the luxurious goods, a lot of silver was imported from Japan. Importing a large quantity of silver fostered the sumptuous moods and also caused the price increase in the Chosun society. The order of the society became worse because of the individual trades of rich merchants who were closely connected to high officials.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.27-34
• /
• 2001

A new functionally gradient metal coating method using an atomic mixing technique was developed. In this work the effect of silver atomic mixing on the tribological characteristics of silver$.$ films. has been investigated experimentally. Atomic mixing was implemented by using the, bombardment .of accelerated Ar ions during the thermal evaporation coating process of silver films. Experiments were performed in dry conditions using a ball-on-disk test rig at a load range of 19.6 mN - 17.64 N and a sliding velocity of 20 mm/sec. Results showed that the life of functionally gradient silver coating was enhanced about 100 times more than that of thermally evaporated silver coating and 2 times more than that of IBAD silver coating. The functionally gradient. film also showed low friction and wear compared to those of the evaporated silver and

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.910
• /
• pp.1312-1319
• /
• 2004

Underwear is laundered frequently and most of them is made of cotton, but a cotton fiber is more difficult to modify than a synthetic fiber. We have attempted to determine the optimum conditions necessary whereby the lowest concentration of silver solution is needed to produce the greatest antimicrobial properties of cotton fabrics. For this study, colloidal silver was made by electrolysis. The concentration of colloidal silver was increased by increasing the area of the silver plates submerged in the water, the water temperature, the water hardness and the flow time of the water per 1l. However, the colloidal silver concentration was decreased by extending a space between the silver plates and increasing the water velocity. Cotton fabrics treated in the washing machine with 1.3 ppm colloidal silver solution for 10 minutes had effective microbial properties and an unperceivable reduction of reflectance.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2979-2984
• /
• 2014

Silver nanoparticles have been synthesized by liquid-phase and alcohol reduction methods. Silver-doped silica-complex nanoparticles were prepared using a sol-gel process. The formation, structure, morphology, and particle size of the nanoparticles have been studied using several techniques. Silver nanoparticles of size of 30-40 nm were formed successfully by alcohol reduction. TEM images show that both the concentration and the molecular weight of polyvinyl pyrrolidone (PVP) considerably affect the size of the emerging silver nanoparticles. The number of silver-doped silica-complex particles increased by a mercapto-group treatment that showed a narrower size distribution than that of silica treated with amino groups. The silver/polyester and silver-doped silica/polyester masterbatch chips showed excellent antibacterial activity against Staphylococcus aureus and Escherichia coli.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.142-145
• /
• 1999

We confirm that when A-type zeolite supporting silver lone is placed in ion-exchanged distilled water, silver ions is eluted and eluted silver ions generates hydroxyl-radical (.OH) and hydro-radical (.H) continuously, the amount of those is proportion to the silver-ion concentration. Hydroxyl-radical is not generated by super-oxide anion-radical (.O2) but by directly dissolved water. To know such a above discussed mechanism, we prepare A-type zeolite supporting silver ions, and measure the amount of the eluted silver tons by atomic absorption spectroscopy and the generated radical by ESR The radical generated by A-type zeolite supporting silver ions is discussed in the application of elecrical and electronic materials.