• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.spc1
• /
• pp.110-122
• /
• 1996

The n-3 family fatty acids containing ${\alpha}$-linolenic acid(18:3, ALA) have been known as physiological activation materials such as inhibitory effects on the incidence of hyper-tension, coronary heart disease and cancers as well as the control of senilc dementia. Although a lot of ALA(about $63\%$) are contained in perilla oil, it has not been commercialized yet because the purification technique of the ALA has not been well established. The procedure of purification of ALA from perilla oil was saponified with 1 N-KOH /ethanol and then saturated and low level unsaturated fatty acids were removed by low-temperature crystallization method. The concentrated unsaturated fatty acids (containing about $75\%$ ALA) went down through the silver nitrate-impregnated silica column chromatography for separation of high purity of ALA. The results obtained we Fraction B, C and D contained ALA more than $85.5\%$(recovery, >$88.9\%,\;95.4\%$(recovery, >$54.4\%$) and $99.9\%$(recovery, >$31.5\%$) in purity, respectively. Seed oil content of the tested varieties were ranged from 34.8 to $54.1\%$ with $45.3\%$ of varietal means. The major omega fatty acids contained in the oil were oleic acid(n-9) $15.2\%$, linoleic acid(n-6) $13.9\%$ and linolenic acid(n-3) $63.1\%$ in the mean value. Varietal variation of n-9, 6 and 3 fatty acids ranged of $9.5\~21.4\%,\;9.1\~20.4\%$ and $50.6\~70.5\%$ respectively. Unsaturated fatty acid were averaged $92.2\%$ of seed oil in fatty acid composition. The ratios of n-6 to n-3 ranged of $0.13\~0.34\%$($0.22\%$ in mean value). The highest n-3 fatty acid variety was Yecheonjong being $70.5\%$. The lowest variety in ratios of n-6 to n-3 was Goseongjong being $0.13\%$. Oil content showed positive correlation with stearic acid and linolenic acid, while the negative correlation with oil content and linoleic acid. On the other hand, A significant negative correlation were showed between linolnic acid and the ratios n-6/n-3 fatty acid, saturated fatty acid. Saturated fatty acid was highly correlated with unsaturated fatty acid negatively being $r= -0.723^{**}$.

• Membrane Journal
• /
• v.24 no.5
• /
• pp.409-415
• /
• 2014

This study is aimed to separate propylene and propane using membrane process instead of NCC(Naphtha Cracking Center) $C_3$ splitter. Membrane process is a low energy consumption and eco-friendly process while $C_3$ splitter requires high energy consumption in petrochemical processes. In this study, high performance facilitated transport membrane (FTM) is used for propylene/propane separation. FTM module was prepared on top of porous polyetherimide hollow fiber using PVP/$AgBF_4$/TCNQ. We developed simulation program predicting the membrane separation properties under operation conditions. Separation properties of FTM module for propylene and propane were obtained from the simulation program based on the pure gas permeation data. Based on these results, it is predicted that an one-stage membrane process provides 99.5% of propylene at permeate side from a binary gas mixture of 95/5 vol% $C_3H_6$ / vol% $C_3H_8$ supplied as a feed gas.

• Journal of Environmental Health Sciences
• /
• v.27 no.3
• /
• pp.71-80
• /
• 2001

Blood and urine mercury level of three workers were monitored during 60~80 days after high exposure to mercury at the silver refining plant. Mercury was used to form silver-mercury amalgam from plating sludge. Workers were exposed to mercury about 70 days at the several processes, such as hand held weaving, vibration table, and heating from the furnace. mercury was analysed by atomic absorption spectroscopy-vapor generation technique. Recovery from the biological sample was 95.51% and pooled standard deviation was 0.033. At the time of study, there was no work at the workplace. So, airborne mercury concentration was measured with area sampling 5 days after the work, ranged from 0.1459 to 1.2351 mg/㎥(Arithmatic mean 0.4711 mg/㎥, Geometric mean 0.3566 mg/㎥) at the inside of the plant, that is far above the ACGIH's TLV(0.025 mg/㎥) and ranged from 0.0073 to 0.0330 mg/㎥ at the outdoor. Blood mercury levels at the beginning of the monitoring were 4~14 times greater than the American Conference of Governmental Industrial Hygienists Biological Exposure Index(ACGIH BEI, 15 ug/L). Blood mercury levels were decreased logarithmically, that is, rapidly at the high level and slowly at the low level but sustained above the level of the ACGIH BEI 60~80 days after the work. Urine mercury levels at the beginning of the monitoring were 8~16 times greater than the ACGIH BEI(35 ug/g creatinine). Urine mercury levels were decreased logarithmically, but correlation between urine level and off-days were lower than those of blood. Decreasing pattern of blood mercury levels were little affected than that of urine levels when the chelating agent, D-penicillamine, was administered. There was correlation between blood mercury level and urine mercury level(0.81~0.83) but it didn\`t mean that the highest blood mercury level corresponded the highest urine mercury level. In our study, Case 1 always shows the highest level in urine but case 3 always shows the highest level in blood. Creatinine correction represented better correlations between urine mercury levels and blood levels, and between urine levels and off-days rather than by urine volume. Spot urine sampling had a wide variation than that of whole day urine sampling. So, We recommend spot urine sampling for screening and whole day urine sampling for exact diagnosis.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.23-29
• /
• 2018

Recently rapid economic growth and technological development have led to an increase in the generation of waste electrical and electronic equipment (WEEE). As the amount of electric and electronic waste generated increases, the importance of processing waste printed circuit boards (PCB) is also increasing. Various studies have been conducted to recycle various valuable metals contained in a waste PCB in an environmentally friendly and economical manner. To get anode slime containing Ag and Au, Anode copper prepared from PCB scraps was used by means of electro-refining. Ag and Au recovery was conducted by leaching, direct reduction, and ion exchange method. In the case of silver, the anode slime was leached at 3 M $HNO_3$, 100 g/L, $70^{\circ}C$, and Ag was recovered by precipitation, alkali dissolution, and reduction method. In the case of gold, the nitrate leaching residues of the anode slime was leached at 25% aqua regia, 200 g/L, $70^{\circ}C$, and Au was recovered by pH adjustment, ion exchange resin adsorption, desorption and reduction method. The purity of the obtained Au and Ag were confirmed to be 99.99%.

• Korean Institute of Interior Design Journal
• /
• v.24 no.1
• /
• pp.43-53
• /
• 2015

As part of alternative of elderly problems in the future super-aging society, this study aims to extract an improvement plan of interior environment design of Seoul-type day care centers to expand in future by observing day care centers as medical and healing environments, from the perspective of user experience. For this study, after selecting major activity areas of representative cases of Seoul-type day care centers, user behaviors in the space were observed and 4 seniors of baby-boom generation who are potential uses were chosen as personas by reflecting characteristics of healthy elderly, physical aging, mental aging and infirm elderly, from the perspective of user experience. Based on previous studies on healing environments, these characteristics and demands of personas were classified into environmental aspects, physical aspects and mental aspects to extract an improvement plan. The study results are as follows. First, interior environment design reflecting persona characteristics helps the elderly adapt to the environment and provides a comfortable environment like home for stability, treatment and recovery of memory. Second, interior environment design reflecting persona characteristics helps psychological healing through light entering the large windows and natural environment elements. Third, for interior environment design reflecting persona characteristics, finish materials with bright and soft colors should be used to change the images of facilities positively. Fourth, spatial composition should be remedied through division of space and built-in furniture depending on the needs of users for loitering of extra time and programs.

• Resources Recycling
• /
• v.26 no.4
• /
• pp.9-18
• /
• 2017

Recently, the amount of electronic scrap is rapidly increasing due to the rapid growth of the electronics industry. Among the components of electronic scrap, the printed circuit board(PCB) is an important recycling target which includes common metals, precious metals, and rare metals such as gold, silver, copper, tin, nickel and so on. In Korea, however, PCB recycling technologies are mainly commercialized by some major companies, and other process quantities are not accurately counted. According to present situation, several urban mining companies, research institutes, and universities are conducting research on recovery of valuable metals from PCBs and/or reusing them as raw materials that is different from existing commercialization process developed by major companies. In this study, we analyzed not only current status of collection/disposal process and recycling of waste PCBs in Korea but also the trend of recycling technologies in order to help resource circulation from waste PCBs become more active.

• Development and Reproduction
• /
• v.12 no.2
• /
• pp.169-181
• /
• 2008

Reproductive ecology of the silver pomfret, Pampus argenteus were investigated by histological observations and morphometric data. Samples were collected by the stow net at the coastal area of Jaun-Do, Muan-gun, Korea, from January to December, 2006. P. argenteus is dioecious, the ovary is composed of many ovarian lobules, showing a pair of saccular structure, and the testis is composed of many seminiferous lobules, showing a pair of lobular structure. From February (growing stage) to September (after spawning), monthly changes in the gonadosomatic index, hepatosomatic index, and condition factor in females and males showed similar patterns with the gonad developmental phases. Judging from the results of their indice, it is assumed that spawning in females and males occur from May to July. The reproductive cycle can be classified into five successive stages in females: early growing stage (February to March), late growing stage (March to April), mature stage (March to July), ripe and spent stage (May to July), and recovery and resting stage (July to February); in males, the cycle can be divided into four successive stages: growing stage (February to April), mature stage (March to June), ripe and spent stage (May to July), and recovery and resting stage (July to February). According to the frequency distributions of egg diameters in the breeding season, P. argenteus is presumed to be spring-summer spawning species and polycyclic species to spawn 2 times or more during one spawning season. Number of total eggs in absolute fecundity were proportional to body length and body weight, respectively. Number of total eggs in absolute fecundity per body weight were also proportional to the body length, but if the increase of body weight considerably increased, rather total eggs in relative fecundity decreased with the increase of body weight. Percentage of first sexual maturity of P. argenteus were over 50% in females and males of 12.1 to 15.0 cm in body length, and 100% for fishes over 18.1 cm in length. Therefore, both sexes were regarded to be sexually mature at one year of age.

• Analytical Science and Technology
• /
• v.17 no.5
• /
• pp.381-387
• /
• 2004

To characterize chemically a spent pressurized water reactor (PWR) fuel, an analytical method for trace amounts of tritium ($^3H$) in it has been established. Considering the effective management of radioactive wastes generated through the whole experimental process and the radiological safety for analysts, a separation condition under which $^{14}C$ and $^3H$ can be sequentially recovered from a single fuel sample was optimized using simulated spent PWR fuel dissolved solutions. $^{14}CO_2$ evolved during dissolution of the spent PWR fuels with nitric acid was trapped in an aliquot of 1.5 M NaOH. $^{129}I_2$ which was volatilized along with $^{14}CO_2$ was removed using a silver nitrate-impregnated silica gel absorbent. $^3H$ remaining in the fuel dissolved solution as $^3H_2O$ was selectively recovered by distillation. Its recovery yield was 97.9% with a relative standard deviation of 0.9% (n=3). $^3H$ in a spent PWR fuel with burnup value of 37,000 MWd/MtU was analyzed, reliability of this analytical method being evaluated by standard addition method.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.175-184
• /
• 2005

With the rapid progress of the aging society in Korea, the silver generation is emerging as another class of users in the new population structure. This is a social issue to be dealt with, and the effect of such a change is being observed dearly in the design area. In addition, there are increasing demands for consideration of minor groups of users including the elderly, the disabled, the left-handed, children and pregnant women and nursing mothers, who have been treated as the weak. Such a human-centered idea may be the manifestation of the recovery of humanity and the self-realization of human beings through experiences and reflections of the industrial society of the past. The present study examined the tendency of design standardization centering on universal design, which has emerged in response to user-centered social needs, and suggested general considerations for the necessity of introducing such standards. These days the meanings of standardization are not limited to quality, performance, safety and economic aspect. Standardization is required to consider the diversity and the welfare of human beings. In addition, one of the important functions of standardization is to provide designers with important clues and guidelines for designing. In reality, however, standardization has been rejected by the circle of design for the reason that it deters free creation, so research on the introduction of standardization has been at standstill. As ISO/IEC Guide71 was published in November 2001, based on which, the Korea Standards Association established KS A ISO/IEC Guide71 without changing its contents. In companies' manufacturing activities, the progress of standardization in connection to universal design is growing more important. However, usefulness and interchangeability for the absolute majority resulting from standardization are incomparable. Lastly, the realization of universal design requires human-centered design mind, based on users' experiences and needs, the characteristics of the human bodies and inconvenient elements rather than standards for the sake of standardization.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.169-176
• /
• 2012

Based on our experience in developing resistive humidity sensor, interdigital gold electrodes with different fingers and gaps have been fabricated on a glass epoxy (GE) substrate using screen printing techniques. The basic structure of the electrode consisted of a 3-, 4- and 5-fingers with gaps of 310 and 460 ${\mu}m$. Gold electrode/GE was prepared by first printing silver nanopaste, followed by consecutive electroless plating of Cu, Ni and then Au. Copolymer of [2-(methacryloyloxy)ethyl] dimethyl benzyl ammonium chloride (MDBAC) and methyl methacrylate (MMA) was used as a humidity-sensing polyelectrolyte, which was fabricated by a screen printing method on the Au electrode/GE substrate. The flexible humidity sensor showed acceptable linearity between logarithmic impedance and relative humidity in the range of 20-95%RH, low hysteresis of 1.5%RH, good response and recovery time of 75 sec at 1 V, 1 kHz, and $25^{\circ}C$. Electrode construction had a significant influence on the humidity-sensing characteristics of polymeric humidity sensors. The activation energy between electrode and ion conducting polyelectrolyte plays an important role in explaining the differences of humidity sensing characteristics such as temperature dependence, sensitivity, linearity and hysteresis.