• 헤리티지:역사와 과학
• /
• 제48권3호
• /
• pp.46-59
• /
• 2015

본 연구는 문화재에 적용 가능한 다양한 훈증방법 중에서 에틸렌 옥사이드(Ethylene oxide)를 포함하는 훈증 약제가 문화재 재질에 미치는 영향을 평가하였다. 이를 위해 지류, 섬유, 금속, 안료 등 4종류의 시험편을 제작하고 훈증처리 전 후의 색상, 무게, 표면 변화, 그리고 지류와 섬유 시험편에 대한 적외선 분광분석을 실시하였다. 훈증처리는 약제를 처리하지 않은 무처리군을 대조군으로 하고 에틸렌 옥사이드 + $HFC_{134a}$, 에틸렌 옥사이드 + $CO_2$ 등 2종류의 훈증제 처리군을 실험군으로 하였다. 색차 측정 결과, 소다회를 이용하여 증해한 한지, 은, 면, 견, 모시, 황색 안료 등에서 색상 변화가 확인되었으며 특히, 은 시험편에서 평균 6.0 이상의 높은 색차 변화가 측정되었다. 그러나 은 시험편의 경우 훈증제를 처리하지 않은 무처리 시험편의 색차가 약제를 처리한 것보다 오히려 높게 나타나 훈증제 처리가 시험편의 색상 변화에 결정적인 영향을 미치지 않은 것으로 판단되나 훈증처리 시 주의가 요구된다. 무게 측정에서는 전체적으로 0~2% 정도의 변화가 나타났으며, 금속 시험편의 변화가 가장 적었고 지류 시험편의 변화가 가장 큰 것으로 나타났다. 시험편의 표면을 현미경으로 관찰한 결과, 일부 시험편 표면에서 색상 변화가 관찰되었으며, 은 시험편에서 가장 큰 변화가 확인되었다. 그러나 지류와 섬유 시험편을 대상으로 한 적외선 분광분석 결과에서 성분상 변화는 확인되지 않았다.

• 한국의류학회지
• /
• 제47권3호
• /
• pp.577-592
• /
• 2023

In this study, nanofiber-based textile sensors were developed for motion detection and monitoring. Poly(vinylidene fluoride) (PVDF) nanofibers containing zinc oxide (ZnO) nanoparticles and silver nanowires (AgNW) were fabricated using electrospinning. PVDF was chosen as a piezoelectric polymer, zinc oxide as a piezoelectric ceramic, and AgNW as a metal to improve electric conductivity. The PVDF/ZnO/AgNW nanocomposite fibers were used to develop a textile sensor, which was then incorporated into an elbow band to develop a wearable smart band. Changes in the output voltage and peak-to-peak voltage (V_p-p) generated by the joint's flexion and extension were investigated using a dummy elbow. The β-phase crystallinity of pure PVDF nanofibers was 58% when analyzed using Fourier transform infrared spectroscopy; however, the β-phase crystallinity increased to 70% in PVDF nanofibers containing ZnO and to 78% in PVDF nanocomposite fibers containing both ZnO and AgNW. The textile sensor's output voltage values varied with joint-bending angle; upon increasing the joint angle from 45° to 90° to 150°, the V_p-p value increased from 0.321 V_p-p to 0.542 V_p-p to 0.660 V_p-p respectively. This suggests that the textile sensor can be used to detect and monitor body movements.

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1832-1836
• /
• 2014

A deep understanding of the metallic silver catalysts formation process on oxide support and the formation mechanism is of great scientific and practical meaning for exploring better catalyst preparing procedures. Herein the thermal decomposition process of supported silver catalyst with silver oxalate as the silver precursor in the presence of ethylenediamine and ethanolamine is carefully investigated by employing a variety of characterization techniques including thermal analysis, in situ diffuse reflectance infrared Fourier transform spectroscopy, scanning electron microscopy, and X-ray diffraction. The formation mechanism of supported silver particles was revealed. Results showed that formation of metallic silver begins at about $100^{\circ}C$ and activation process is essentially complete below $145^{\circ}C$. Formation of silver was accompanied by decomposition of oxalate group and removal of organic amines. Catalytic performance tests using the epoxidation of ethylene as a probe reaction showed that rapid activation (for 5 minutes) at a relatively low temperature ($170^{\circ}C$) afforded materials with optimum catalytic performance, since higher activation temperatures and/or longer activation times resulted in sintering of the silver particles.

• 기술사
• /
• 제14권4호
• /
• pp.15-25
• /
• 1981

Electrical behaviors of the divalent silver oxide-zinc cell were analyzed for imporving capacity and keeping electrodes from passivation or sharp increases of cell internal resistance in the course of discharge. One of primary factors in relation to lowering performance can be depicted by cell internal resistance increase being created by various routes, first by insufficiency and/or the carbonation of the electrolyte, secondly by barrier blockage, thirdly by electrode passivation which are due to improper material use of wrong processing, and by gassing as fourth cause. The carbonation causes electrobyte to have impedance up as well as poor amalgamation, resulting in vigorous corrosion reaction of copper plated inner top, evolving hydrogen gas. Electrical characteristics of the cell was reviewed to elucidate relationships between the discharge capacity and the cell internal resistance.

• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.43-48
• /
• 2015

Silver nanowire (AgNW) is a material that is increasingly being used for transparent electrodes, as a substitute for indium tin oxide (ITO), owing to its flexibility, high transmittance to sheet resistance ratio, and simple production process. This study involves manufacturing large-area organic photovoltaic cells (OPVs) deposited on AgNW electrodes. We compared the efficiency of OPVs with ITO and AgNW electrodes. The results verified that an OPV with an AgNW electrode performed better than that with an ITO electrode. Furthermore, by using the knife coating method, we successfully fabricated large-area OPVs without the loss of efficiency. Use of AgNW instead of ITO demonstrated that an OPV could be produced on various substrates by the solution process method, dropping the productions costs significantly. Additionally, by using the knife coating method, the process time and amount of wasted solution are reduced. This leads to an increase in the efficient fabrication of the OPV.

• 대한치과교정학회지
• /
• 제53권1호
• /
• pp.16-25
• /
• 2023

Objective: We aimed to evaluate the cell viability and antimicrobial effects of orthodontic bands coated with silver or zinc oxide nanoparticles (nano-Ag and nano-ZnO, respectively). Methods: In this experimental study, 30 orthodontic bands were divided into three groups (n = 10 each): control (uncoated band), Ag (silver-coated band), and ZnO (zinc oxide-coated band). The electrostatic spray-assisted vapor deposition method was used to coat orthodontic bands with nano-Ag or nano-ZnO. The biofilm inhibition test was used to assess the antimicrobial effectiveness of nano-Ag and nano-ZnO against Streptococcus mutans, Lactobacillus acidophilus, and Candida albicans. Biocompatibility tests were conducted using the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide assay. The groups were compared using oneway analysis of variance with a post-hoc test. Results: The Ag group showed a significantly higher reduction in the number of L. acidophilus, C. albicans, and S. mutans colonies than the ZnO group (p = 0.015, 0.003, and 0.005, respectively). Compared with the control group, the Ag group showed a 2-log₁₀ reduction in all the microorganisms' replication ability, but only S. mutants showed a 2-log₁₀ reduction in replication ability in the ZnO group. The lowest mean cell viability was observed in the Ag group, but the difference between the groups was insignificant (p > 0.05). Conclusions: Coating orthodontic bands with nano-ZnO or nano-Ag induced antimicrobial effects against oral pathogens. Among the nanoparticles, nano-Ag showed the best antimicrobial activity and nano-ZnO showed the highest biocompatibility.

• 자원리싸이클링
• /
• 제33권1호
• /
• pp.31-36
• /
• 2024

폐산화은 전지의 질산 침출액으로부터 Ag(산화상태)와 Zn(산화상태)의 분리를 위해 cyanex272를 추출제로 사용하여 용매추출 실험을 수행했다. Ag와 Zn의 추출은 질산과 추출제의 농도에 영향을 받았다. Cyanex272는 HNO₃ 농도가 0.1 mol/L보다 낮을 때 Ag보다 Zn을 선택적으로 추출되었다. 공동 추출된 Ag는 1 mol/L thiourea로 탈거하여 제거했다. Ag를 제거한 후 0.5 mol/L HNO₃를 사용하여 추출 된 Cyanex272에서 Zn을 탈거했다. Cyanex272를 사용한 Zn의 추출, thiourea를 사용한 Ag의 탈거, HNO₃를 사용한 Zn의 탈거에 대한 McCabe-Thiele 다이어그램이 각각 구성되었다. 위 결과는 시뮬레이션 된 계수 전류 추출 및 탈거 실험을 통해 검증되었다. 마지막으로 산화은 전지에서 Ag와 Zn을 분리하는 공정이 제안되었다.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.284-287
• /
• 2017

This paper introduces liquid crystal (LC) alignment and its electro-optical properties in the LC cells with silver nanowire (AgNW) networks. The AgNW network was used as an electrode of LC cell as a substitute for an indium-tin-oxide (ITO) film. LC alignment characteristics in the LC cell using AgNW networks, which have two different sheet resistances of $60{\Omega}/m^2$ and $80{\Omega}/m^2$, were observed. The LC alignment characteristics including pretilt angle, LC alignment state, and thermal stability are similar irrespective of sheet resistance of AgNW network. However, twisted-nematic (TN)-LC cell normally operated when using AgNW network with sheet resistance of $80{\Omega}/m^2$. Electrooptical properties of TN-LC cell exhibited competitive performance compared to those of TN-LC cell based on conventional ITO electrode, which allow new approaches to replace conventional ITO electrode in display technology.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.547-547
• /
• 2012

As displays become larger and solar cells become cheaper, there is an increasing need for low-cost transparent electrodes. Intensive effort has been made to replace ITO (Indium Tin Oxide) based transparent electrode with cheap and flexible ones. Among those, silver nanowires have got limelight because of its great conductivity and flexibility. Even though the electric property of the Ag nanowire based transparent electrode surpassed ITO, the optical property needs to be improved (lower transmittance, higher haze). Here, we reported transparent electrode based on Ag nanowires and conducting polymer to improve optical properties. The Ag nanowires are coated onto PET films and the resulting transparent electrode film shows $200ohm/{\Box}$ resistance and > 90% optical transmittance.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.275-275
• /
• 2011

전극에 응용할 수 있는 소재 중 탄소나노소재는 구리와 비슷한 전기 전도성을 가지며 박막 코팅 시 투명성이 보장되고 코팅력이 매우 우수하다. 하지만 현재 다양한 분야에 응용되고 있는 투명전극 소재인 Indium tin oxide (ITO)를 대체하기에는 아직 이른 실정이다. 또 다른 투명전극 응용 소재인 silver nanowire는 전기 전도성이 우수한 반면 투명 전극으로서 두께가 두꺼워질수록 Haze 발생과 기판과의 부착력, 박막형성 뒤의 내구성 문제가 있다. 본 연구에서는 상기 두 재료를 결합하여 복합 전극을 만들어 두 재료의 복합 비율에 따른 투명성과 전기 전도성을 비교하였다.