• BMB Reports
• /
• v.38 no.6
• /
• pp.668-675
• /
• 2005

A full-length cDNA encoding taxadiene synthase (designated as TmTXS), which catalyzes the first committed step in the Taxol biosynthetic pathway, was isolated from young leaves of Taxus media by rapid amplification of cDNA ends (RACE). The full-length cDNA of TmTXS had a 2586 bp open reading frame (ORF) encoding a protein of 862 amino acid residues. The deduced protein had isoelectric point (pI) of 5.32 and a calculated molecular weight of about 98 kDa, similar to previously cloned diterpene cyclases from other Taxus species such as T. brevifolia and T. chinenisis. Sequence comparison analysis showed that TmTXS had high similarity with other members of terpene synthase family of plant origin. Tissue expression pattern analysis revealed that TmTXS expressed strongly in leaves, weak in stems and no expression could be detected in fruits. This is the first report on the mRNA expression profile of genes encoding key enzymes involved in Taxol biosynthetic pathway in different tissues of Taxus plants. Phylogenetic tree analysis showed that TmTXS had closest relationship with taxadiene synthase from T. baccata followed by those from T. chinenisis and T. brevifolia. Expression profiles revealed by RT-PCR under different chemical elicitor treatments such as methyl jasmonate (MJ), silver nitrate (SN) and ammonium ceric sulphate (ACS) were also compared for the first time, and the results revealed that expression of TmTXS was all induced by the tested three treatments and the induction effect by MJ was the strongest, implying that TmTXS was high elicitor responsive.

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.315-319
• /
• 2001

The study was carried out to develop a simple and efficient system to regenerate plants from cotyledon and hypocotyl tissues of Chinese cabbage (Brassica campestris L. ssp. pekinensis cv Seoul). Among the various combinations of naphthalene acetic acid (NAA) and 6-benzyladenine (BA) tested, the best shoot induction medium for cotyledon, with 2.67 shoots per explants, contained $2.0mg{\cdot}L^{-1}$ NAA, $1.0mg{\cdot}L^{-1}$ BA and $16.7mg{\cdot}L^{-1}$ $AgNO_3$. The shoot induction medium with $1.0mg{\cdot}L^{-1}$ NAA, $5.0mg{\cdot}L^{-1}$ BA and $16.7mg{\cdot}L^{-1}$ $AgNO_3$, was best for shoot induction from hypocotyl explants, with 1.87 shoots per explants. After shoot induction, regenerated shoots were excised and rooted on rooting medium. Rooted plantlets were then hardened in the high humidity growth chamber and transplanted to pots, and then grown in the greenhouse. Regenerated plants appeared phenotypically normal and there were no changes in chromosome number.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.3
• /
• pp.144-149
• /
• 2016

The metal-impregnated activated carbon was produced from bamboo activated carbon by soaking method of metal nitrate solution. The carbonization and activation of raw material was conducted at $900^{\circ}C$. The specific surface area and pore size distribution of the prepared activated carbons were measured. Also, NO and activated carbon reaction were conducted in a thermogravimetric analyzer in order to use as de-NOx agents of used activated carbon. Carbon-NO reactions were carried out with respect to reaction temperature ($20^{\circ}C{\sim}850^{\circ}C$) and NO gas partial pressure (0.1 kPa~1.8 kPa). As results, the specific volume and surface area of bamboo activated carbon impregnated with copper were decreased with increasing Cu amounts of activated carbon. In NO reaction, the reaction rate of Cu impregnated bamboo activated carbon[BA(Cu)] was promoted to compare with that of bamboo activated carbon[BA]. But the reaction rate of Ag impregnated bamboo activated carbon[BA(Ag)] was retarded. Measured reaction orders of NO concentration and activation energy were 0.63[BA], 0.92[BA(Cu)], and 80.5 kJ/mol[BA], 48.5 kJ/mol[BA(Cu)], 66.4 kJ/mol[BA(Ag)], respectively.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.4
• /
• pp.306-312
• /
• 2010

Purpose: The purpose of this experiment was to evaluate the clinical effect of cultured autoglogous osteoblasts as a way to treat the defect of mandible in rabbits. Materials and Methods: Twelve rabbits were used to determine the rate of osteogenesis. The osteoblasts were obtained from the iliac crest of rabbits using aspiration. They were then cultured in Dulbecco's Modified Eagles's Medium (DMEM) with beta-glycerophosophatate, L-ascorbicacid, and dexamethasone to proliferate and differentiate osteoprogenitor cells. The expression of osteogenic markers were detected by reverse transcription-polymerase chain reaction (RT-PCR) and silver nitrate staining techniques. Five, 10-mm holes were placed in each rabbit mandible to simulate defective regions with the use of a low speed trephine bur. In the experimental group, the previously cited defects were grafted with both activated osteoblastic and autogenous bone. The control group, however, was only grafted with autogenous bone. Both groups were then analyzed at 2, 4, and 8-week intervals using bone histomorphometric analysis. Results: According to histomorphologic analysis, the rates of new bone formation at the 2, 4, and 8-week intervals were 36%, 51%, and 23% for the control group, respectively; 52%, 39%, and 28%, for the experimental group, respectively. The experimental group showed higher rates of new bone formation compared to the control group at both the 2-week and 8-week interval. Conclusion: Bone marrow-derived osteoblasts seems to be a promising bone graft material.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.3
• /
• pp.257-265
• /
• 2020

This study was performed to evaluate the restoration combined with resin infiltration (RI) of early cavitated smooth surface caries lesion in terms of microleakage. Flowable resin and resin-modified glass ionomer cement (RMGIC) were compared. Sound 20 extracted 3rd molars were divided into 2 groups randomly. Artificial decalcified lesion was induced. Cavities were prepared on the mesial and distal surfaces, and randomly set as experimental and control group. RI was applied to the experimental group before cavity restoration. The control group was restored without RI. In group I and II, flowable resin and RMGIC was used for restoration respectively. After thermocycling and silver nitrate immersion, microleakage was assessed by μ-CT. Depth of microleakage was lower in experimental group than control group only in group II (p = 0.05). Microleakage depth was lower in group II than group I in both experimental and control groups (p = 0.05). RI pretreatment before restoration of early cavitated caries lesions might reduce the microleakage and help long-term maintenance of restoration. In this study, RMGIC was less polymerization shrinkage. Restoration with RMGIC after RI pretreatment reduced the microleakage of the restoration compared to the flowable resin.

• Journal of Korean Society of Forest Science
• /
• v.84 no.1
• /
• pp.41-47
• /
• 1995

A micropropagation system for black Locust(Robinia pseudoacacia) was established by using shoots and pin-punctured leaves of in vitro germinated seedlings. The greatest number of shoots (an average of 10.5 shoots) was obtained when shoot tips were cultured on MS medium supplemented with 1.0 mg/l BAP and 0.01 mg/l NAA. When pin-punctured leaf explants were cultured on the same medium, mean number of 13.5 shoots were produced. Shoot growth was accelerated by adding 50 mg/l of silver nitrate ($AgNO_3$), an anti-ethylene compound to the culture medium. Each shoot was excised from the mass and transferred onto half strength MS medium for rooting. Zygotic embryos at different developmental stages were cultured on LS medium supplemented with various growth regulators to induce somatic embryos. When cultured on LS medium with 1.0 mg/l 2,4-D. 14.3% of the zygotic embryos induced somatic embryos. Upon transfer onto the basal medium, somatic embryos sporadically converted into plantlets.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.479-487
• /
• 2002

복합레진의 중합시 발생하는 수축과 응력은 와동의 형태에 의하여 영향을 받으며 이는 수복재는 물론 접착계면의 물성을 결정하는 요인이 된다. 본 연구는 다양한 C-factor를 갖는 와동에 상아질 접착제 Clearfil SE Bond(Kuraray)를 도포하고 혼합형 복합레진인 Clearfil AP-X(Kuraray)와 미세혼합형의 Esthet-X(Dentsply)를 충전하여 미세인장강도 및 변연누출을 측정 평가함으로써 중합수축이 수복물과 치아계면에 미치는 영향을 평가하고자 시행하였다. 98개의 Bovine 하악전치를 이용하여 표면의 상아질을 #600 SiC paper로 연마한 대조군 및 와동의 넓이를 조절하여 C-factor 2.3, 3.0, 3.7이 되도록 제작한 실험군 와동에 복합레진을 충전한 후 37의 증류수에 24시간 보관하였다. 저속 diamond saw(Buehler)를 이용하여 1mm 두께로 수직절단 후 고속 diamond point(#104 Shofu)를 이용하여 단면적 1mm$^2$가 되도록 hour-glass모양으로 형성하여 시편을 제작하였고, Universal testing machine(EZ-Test; Shimadzu, Japan)에 시편을 부착하고 cross head speed 1mm/min으로 인장력을 가하여 미세인장 결합강도를 측정하였다. 각 C-factor에 따른 변연누출실험을 위하여 복합레진이 수복된 치아를 37$^{\circ}C$의 증류수에 24시간 보관한 후 와동을 제외한 부위에 nail varnish를 도포하고 3mol/L silver nitrate용액에 24시간 암보관한 다음 수세하여 현상액에 24시간 경과시킨 후 치아의 장축에 따라 절단하여 침투된 색소의 정도를 광학현미경상에서 40배로 관찰하였다. 각각의 실험결과는 ANOVA/Tukey's test 및 Kruskal-Wallis non-parametric independent analysis와 Mann-Whitney U test에 의하여 통계 분석하여 다음과 같은 결론을 얻었다. 1. 대조군에 있어서 혼합형 복합레진의 미세인장 결합강도는 미세혼합형에 비하여 높았으며, 실험군 사이에는 유의차를 보이지 않았다. 2.모든 복합레진의 미세인장 결합강도는 와동의 C-factor증가에 따라 감소하는 경향을 나타내었고, 혼합형 복합레진의 실험군은 대조군에 비하여 낮게 나타났으며, 미세혼합형 복합레진에서는 유의차를 보이지 않았다. 3. 절단측 및 치은측 변연부의 미세누출정도는 혼합형 복합레진이 미세혼합형에 비하여 대체로 높게 나타났다. 4. 모든 실험군에서 미세누출은 C-factor증가에 따라 증가하였고 절단측에 비하여 치은측 변연이 높게 나타났으나 통계학적 유의차는 보이지 않았다. C-factor의 변화에 대하여 필러함량과 탄성계수가 높은 혼합형 복합레진이 미세혼합형에 비하여 더 민감한 결과를 보인다. 이는 복합레진 수복시 재료의 선택과 중합수축의 적절한 조절이 중요한 요소임을 시사한다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.3
• /
• pp.185-193
• /
• 1976

The sterol compositions of the Pelecypoda, M. sultataria, S. sachalinensis, and the Gastropoda, H. discus hannai Inc, T. cornutus were investigated. The results areas follows: 1. The contents of the unsaponifiables and sterols of the Pelecypoda, M. sulcataria, S. sathalinensis, and the Gastropoda, H. discus hannai Ino, T. cornutus, are $12.0\%,\;11.8\%,\;and\;16.2\%,\;15.3\%$, respectively. 2. The complex sterols from the Pelecypoda and Gastropoda are well separated on Silica Gel HF 254 TLC impregnated with $15\%$ silver nitrate. 3. The prominent sterols of the Pelecypoda, M. sulcateria and S. sachalinensis, are 22-trans-24-norcholesta-5, $22-dien-3\beta-ol$ $3.0\%\;3.9\%$ 22-dehydrocholesterol $6.7\%,\;10.2\%$, cholesterol $39.0\%,\;48.6\%$ brassicasterol $14.1\%,\;13.8\%$ 24-methylenecholesterol $19.4\%,\;11.5\%$, stigmasterol $2.4\%,\;0\%$ $\beta-sitosterol\;10.5\%,\;11.9\%$, and fucosterol $4.3\%,\;0\%$. 4. Abalone, H. discus hannai Ino, and T. cornutus contain cholesterol $98.0\%,=97.5\% as main component with small amounts of 22-dehydrocholesterol, brassicasterol and desmosterol. In H. discus hannai rno, 24-methylenecholesterot and fucosterol are also found.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.337-343
• /
• 2006

The purpose of this study was to estimate the relation between techniques used for microleakage from dye penetration and for marginal adaptation from SEM evaluation of the restoration. Using high speed #330 bur class V cavities ($4{\times}3{\times}1.5 mm$ around CEJ) were prepared on the buccal surface of 20 extracted human molars. Six dimples as reference points for SEM and dye penetration evaluation were made with 1/2 round bur. Cavity was bulk filled with microhybrid composite resin (Esthet X) and all-in-one adhesive (Xeno III). Teeth were stored in saline solution for one day, after then, they were finished and polished using Sof-Lex system. Fifty percent silver nitrate dye solution was used for the evaluation of microleakage and resin replica was used for marginal adaptation. All of these were done after 1000 times thermocycling between 5 and $55^{\circ}C$. Vertical sections were made through three dimples of restoration to obtain samples for the evaluation of dye penetration and inner marginal adaptation. Outer adaptational estimation was done with an intact restoration before sectioning. Dye penetration was determined in three degrees and percentage of outer and inner leaky margin was estimated from SEM image The data were analysed statistically: Spearman's rho test were used to check relationships between two methods. The result were as follows : 1. There were significant relationships between degree of dye penetration and inner and outer marginal adaptations each (p < 0.01). 2. However, there was no significant relationship between the results or inner and outer marginal adaptation. Within the results of this study, relationship between the percentage of marginal adaptation and microleakage shows significant relationship. However, inner and outer marginal adaptation did not show any significant relationship mutually.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.4
• /
• pp.382-391
• /
• 2019

This study was aimed to assess the new trial for minimal cavity preparation in composite restoration combined with resin infiltration, focusing at application sequence. 32 human primary molars with early carious lesions around small cavity were selected and randomly divided into two groups, according to the sequence of cavity preparation (P), composite filling (F) and resin infiltration (I) as IPF and PFI group. Each group was assessed about amount of tooth reduction, features of resin infiltration, and marginal leakage around restoration. Amount of tooth reduction evaluated using micro-CT was decreased compared with the original lesion size in both groups. Features of resin infiltration were verified under confocal laser scanning microscopy. In both groups, infiltrant resin was found on all around the composite and maintained in spite of extent of decalcification even after artificial caries induction. Marginal micro leakage assessed with silver nitrate immersion and micro-CT was found more frequently in PFI group. The technique combining resin infiltration and composite restoration might ensure better adhesion prognosis as applied by the sequence of resin infiltration, cavity preparation, and composite filling. This new trial was thought meaningful in minimizing the cavity size and contributing to minimal invasive dentistry.