• Bulletin of the Korean Chemical Society
• /
• 제10권6호
• /
• pp.485-488
• /
• 1989

A carbon paste coated-wire ion-selective electrode for chloride (carbon chloride-CWE) was constructed using epoxy resin, ion-exchanger and carbon powder as a polymer membrane. Its utility, the composition of a polymer membrane, the response characteristics, and the selectivity were examined and applied to the environmental water analysis. The carbon chloride-CWE was prepared using a silver wire, which was covered with silver chloride and then coated with epoxy resin into which chloride ion-exchanger and carbon powder were previously incorporated in advance. The response of the carbon chloride-CWE was Nernstian for $1.0{\times}10^{-2}-2{\times}10^{-5}$ M chloride and the useful pH range from $10^{-2} M Cl- to 10^{-4} M Cl^-$ was 3.0-9.0. Furthermore, the selectivity of chloride over iodide, bromide, and cyanide was much improved compared with those for a solid state epoxy body chloride electrode and a liquid membrane chloride electrode. The carbon chloride-CWE was applied to determine Cl^-$ in tap and ground water. The obtained results were in good agreement with those by the established methods such as spectrophotometric or other chloride-selective electrode methods.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.53.2-53.2
• /
• 2010

In this study, we focused on our specialized electrode process for Si back-contact crystalline solar cell. It is different from other well-known back-contact cell process for thermal aspect and specialized process. In general, aluminum makes ohmic contact to the Si wafer and acts as a back surface reflector. And, silver is used for low series resistance metal grid lines. Aluminum was sputtered onto back side of wafer. Next, silver is directly patterned on the wafer by screen printing. The sputtered aluminum was removed by wet etching process after rear silver electrode was formed. In this process, the silver paste must have good printability, electrical property and adhesion strength, before and after the aluminum etching process. Silver paste also needs low temperature firing characteristics to reduce the thermal budget. So it was seriously collected by the products of several company of regarding low temperature firing (below $250^{\circ}C$) and aluminum etching endurance. First of all, silver pastes for etching selectivity were selected to evaluate as low temperature firing condition, electrical properties and adhesive strength. Using the nano- and micron-sized silver paste, so called hybrid type, made low temperature firing. So we could minimize the thermal budget in metallization process. Also the adhesion property greatly depended on the composition of paste, especially added resin and inorganic additives. In this paper, we will show that the metallization process of back-contact solar cell was realized as optimized nano-paste characteristics.

• 비파괴검사학회지
• /
• 제34권5호
• /
• pp.377-383
• /
• 2014

위치 감응형 전극 네트워크(addressable conducting network, ACN)는 탄소섬유 복합재료와 전극 사이의 접촉저항을 통해 구조물의 손상 감지가 가능하다. 손상 감지를 위한 위치 감응형 전극 네트워크의 신뢰성을 향상시키기 위해서는 전극과 복합재료 사이의 접촉저항이 최소화되어야 한다. 본 연구에서는 은 나노 전극을 탄소섬유 복합재료 위에 인쇄전자기술을 이용하여 제작하였다. 은 전극이 형성된 복합재료는 은 나노 잉크의 소결온도와 복합재료의 표면거칠기에 따라 제작되었으며, 이에 따른 접촉저항을 측정하였다. 또한, 전자주사현미경(scanning electron microscope, SEM)을 통해 전극과 복합재료 사이의 계면을 관찰하였다. 본 연구를 통해, 은 나노 잉크의 소결온도가 $120^{\circ}C$, 복합재료의 표면거칠기가 0.230a일 때, $0.3664{\Omega}$의 최소 접촉저항을 나타냈다.

• 센서학회지
• /
• 제29권4호
• /
• pp.227-231
• /
• 2020

Silver nanowire random networks are promising candidates for replacing indium tin oxide (ITO) as transparent and conductive electrodes. They can also be used as transparent heating films with self-cleaning and defogging properties. By virtue of the Joule heating effect, silver nanowire random networks can be heated when voltage bias is applied; however, they are unsuitable for long-term use. In this work, we study the Joule heating of silver nanowire random networks embedded in polymers. Silver nanowire random networks embedded in polymers exhibit breakdown under the application of electric current. Their surface morphological changes indicate that nanoparticle formation may be the main cause of this electrical breakdown. Numerical analyses are used to investigate the temperatures of the silver nanowire and substrate.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2250-2255
• /
• 2010

An fine silver particle has a variety of uses, such as in killing micrograms and as catalysts. Many techniques have been used for the production of the fine particles. Faraday cell, consisting of two silver electrodes in an electrolyte, is unique, but it is hard to get a very fine particle by this method. A finer silver nano-particle producing cell, utilizing a dielectric bed as a lower electric current and higher field controlling means, has been proposed and investigated. The I-V characteristics of the cell and effect of the dielectric bed on the producing finer silver nano-particles have been investigated. The I-V characteristics of the cell with the dielectric bed were different from that of the same system without the bed, due to the increased cell resistance and elevated electric field intensity. It is found that the proposed cell with the dielectric bed can produce finer silver nano-particles effectively, which, however, can be used as one of effective fine silver nano-particle producing means.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1552-1555
• /
• 2005

We have studied the inkjet patterning of synthesized aqueous silver nano-sol on interface-controlled ITO glass substrate. Furthermore, we designed the conductive ink for direct inkjet patterning on bare ITO glass substrate. The first, the highly concentrated polymeric dispersant-assisted silver nano sol was prepared by variation of molecular weight and control of initial nucleation and growth of silver nanoparticles. The high concentration of batch-synthesized silver nano sol was possible to 40 wt%. At the same time the particle size of silver nanoparticles was below $10{\sim}20nm$. The second, the synthesized silver nano sol was inkjet - patterned on ITO glass substrate. The connectivity and width of fine line depended largely on the wettability of silver nano sol on ITO glass substrate, which was controlled by surfactant. The relationship was understood by wetting angle. The fine line of silver electrode as fine as $50{\sim}100\;{\mu}m$ was successfully formed on ITO glass substrate. The last, the direct inkjet-patternable silver nano sol on bare ITO glass substrate was designed also.

• 한국분말재료학회지
• /
• 제24권4호
• /
• pp.315-320
• /
• 2017

There has been much interest in recycling electronic wastes in order to mitigate environmental problems and to recover the large amount of constituent metals. Silver recovery from electronic waste is extensively studied because of environmental and economic benefits and the use of silver in fabricating nanodevices. Hydrometallurgical processing is often used for silver recovery because it has the advantages of low cost and ease of control. Research on synthesis recovered silver into nanoparticles is needed for application to transistors and solar cells. In this study, silver is selectively recovered from the by-product of electrodes. Silver precursors are prepared using the dissolution characteristics of the leaching solution. In the liquid reduction process, silver nanoparticles are synthesized under various surfactant conditions and then analyzed. The purity of the recovered silver is 99.24%, and the average particle size of the silver nanoparticles is 68 nm.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.878-881
• /
• 2006

본 논문에서는 다양한 전극재료로부터 빛의 밝기와 저항을 측정하였고 분석하였다. 외부전극의 새로운 재료와 공정기술은 램프제작에서 개선된 특성을 위해서 매우 중요하다. 본 실험에서는 외부전극을 형성하기 위한 다른 세가지 타입은 구리와 알루미늄 테이핑, 은 접착, 니켈과 구리의 무전해 도금 방법들이다. 밝기측정에서 램프유리위에 외부전극을 위한 니켈과 금플레이팅 방법에 의한 휘도의 결과를 나타내었고 또한 다른 전극재료를 사용한 방법에 의한 결과들과 비교하였다. 니켈과 금플레이팅 공정의 측정된 저항값은 휘도의 개선된 결과에도 불구하고 다소 더 높은 저항값을 나타내었다. 그러나 니켈과 니켈/금 도금방법은 가장 좋은 결과를 나타내었고 사전 표면 식각에 따른 약간의 다른 휘도를 나타내었다.

• 한국정보통신학회논문지
• /
• 제11권3호
• /
• pp.549-554
• /
• 2007

본 논문에서는 다양한 전극재료로부터 빛의 밝기와 저항을 측정분석 하였다. 외부전극의 새로운 재료와 공정기술은 램프제작에서 개선된 특성을 위해서 매우 중요하다. 본 실험에서는 외부 전극을 형성하기 위한 다른 세가지 타입은 구리와 알루미늄 테이핑, 은 접착, 니켈과 구리의 무전해 도금 방법들이다. 밝기측정에서 램프유리위에 외부 전극을 위한 니켈과 금 플레이팅 방법에 의한 휘도의 결과를 나타내었고, 또한 다른 전극재료를 사용한 방법에 의한 결과를 비교 하였다. 니켈과 금플레이팅 공정의 측정된 저항값은 휘도의 개선된 결과에도 불구하고 다소 높은 저항값을 나타내었다. 니켈과 니켈/금 도금방법은 가장 좋은 결과를 나타내었고, 사전 표면 식각에 따라 약간의 다른 휘도를 나타내었다.

• 자원리싸이클링
• /
• 제31권3호
• /
• pp.61-72
• /
• 2022

주요성분이 Sn(93.0 %)-Ag(3.26 %)-Cu(0.89 %)로 구성되는 SAC 폐무연솔더로부터 주석과 은을 회수하기 위한 전기화학적인 방법을 연구하였다. 폐무연솔더의 건식용해, 주조를 통해 제조한 작업전극을 사용하여 분극거동 조사와 정전류 전해용해를 실시하였다. 분극시험 시 활성화영역의 산화전류피크는 전해액의 황산 농도가 높아질수록 감소하였으며, 1 molL^-1 황산농도가 전해용해를 위해 가장 적절한 것으로 나타났다. 정전류 용해 시 전극표면의 부동태층인 양극슬라임이 두꺼워짐에 따라 전극전위가 지속적으로 높아졌으며, 10 mAcm^-2에서 25시간동안 지속적인 전해용해가 가능한 반면 50 mAcm^-2에서는 2.5 시간 이후부터 전극전위가 급상승하여 전해용해반응이 중단되었다. 정전류 전해용해 시 은은 양극슬라임에 농축되었으며, 전해액내 염소이온의 농도가 0.3 molL^-1인 경우 농축율이 미첨가 조건보다 12.7% 높은 94.3%를 나타내었다. 또한 염소이온의 첨가에 의해 전해액내 주석이온의 안정성을 높이고 주석의 전착전류효율을 향상시킬 수 있었다.