• 제목/요약/키워드: silver

검색결과 3,470건 처리시간 0.035초

Silver Selenide 전극의 제조 및 그 특성에 관한 연구 (A Study on the Preparation of the Silver Selenide Electrode and Its Properties)

  • 인권식;민태원;이수형
    • 대한화학회지
    • /
    • 제20권4호
    • /
    • pp.280-289
    • /
    • 1976
  • $Ag_2Se$ 전극을 제조하고 은이온에 대한 지시전극으로서의 성질을 조사하였다. Epoxy 수지를 Ag_2Se 전극의 binder로서, Silver paste를 감응막과 은판의 접착제로서 사용하였다. 감응막은 10ton/$cm^2$로 가압성형 한다음 질소분위기에서 200${\sim}$$500^{\circ}C$로 sintering한 후 전극을 제조한 결과sintering 하지않은 전극보다 감응성이 우수하고 견고하였다. 또한 $Ag_2Se$전극보다 감응성이 우수하였다. 은이온농도의 변화에 따르는 감응도는 10-6M까지 직선관계를 유지하였다. 대부분의 중금속 이온은 방해하지 않으나 수은(II) 이온이 크게 방해를 하였으며 음이온인 halide, cyanide, thiocyanate 이온의 방해는 더욱 심하였다. 반면 이전극은 halide 이온 정량시 전위차적정법으로 사용할 수 있음을 알았다.

  • PDF

나노실버페이스트를 사용하는 코팅공정에 의한 coated conductor의 은 안정화층 제조 (Fabrication of silver stabilizer layer by coating process using nano silver paste on coated conductor)

  • 이종범;김병주;김혜진;유용수;이희균;홍계원
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제11권1호
    • /
    • pp.1-4
    • /
    • 2009
  • Mechanical and electrical properties of silver stabilizer layer of coated conductor, which as prepared with nano silver paste as starting materials, have been investigated, Nano silver paste was coated on a YBCO film by dip coating process at a diping speed of 20m/min. Coated film was dried in air and heat treated at $400{\sim}700^{\circ}C$ in an oxygen atmosphere. Adhesion strength between YBCO and silver layer was measured by a tape est(ASTM D 3359). Hardness and electrical conductivity of the samples were measured by pencil hardness test (ASTM D 3363) and volume resistance test by LORESTA-GP (MITSHUBISHD, respectively. The sample heat-treated at $500^{\circ}C$ showed poor adhesion 1B, but samples heat treated at higher than $600^{\circ}C$ showed enhanced adhesion of 5B. The silver layer heat-treated at $700^{\circ}C$ showed the high hardness value larger than 9 H, low volume resistance, surface resistance value as well as superior current carrying capacity compared to sputtered silver. SEM observations showed that a dense silver layer was formed with a thickness of about $2{\mu}m$. Dip coated silver layer prepared by using nano silver paste showed superior electrical and mechanical characteristics.

Effects of Nanometer Sized Silver Materials on Biological Toxicity During Zebrafish Embryogenesis

  • Yeo, Min-Kyeong;Kang, Mi-Sook
    • Bulletin of the Korean Chemical Society
    • /
    • 제29권6호
    • /
    • pp.1179-1184
    • /
    • 2008
  • Commercial nanometer sized silver is widely used for its antibacterial effect; however, nanoparticles may also have ecotoxicological effects after being discharged into water. Nanometer sized silver can flow into aquatic environments, where it can exert a variety of physiologically effects in living organisms, including fish. The present study aimed to investigate the effect of nanometer sized silver on the development of zebrafish embryos, analyze the properties of commercial nanometer sized silver and define the toxicity relationship between embryogenesis and hatched flies. The commercial nanometer sized silver was analyzed in the $Ag^+$ ion form. The hatch rate decreased in the nano-silver exposed groups (10 and 20 ppt); furthermore, the hatched flies had an abnormal notochord, weak heart beat, damaged eyes and curved tail. The expression of the Sel N1 gene decreased in the nano-silver exposed groups, and the catalase activities of the exposed groups increased relative to those in the control group. Therefore, the $Ag^+$ ions in commercial nanometer sized silver could accumulate in aquatic environments and seriously damage the development of zebrafish embryos.

은 나노입자가 함침된 Poly (3, 4-ethylenedioxythiphene) : poly (styrenesulfonate)필름의 전자 구조상태에 미치는 열처리효과 연구 (Effect of Annealing Temperature with Silver Nanoparticles Incorporation on the Electronic Structure of Poly (3, 4-ethylenedioxythiphene) : poly (styrenesulfonate) Film)

  • 왕석주;이초영;박형호
    • 한국재료학회지
    • /
    • 제18권9호
    • /
    • pp.503-506
    • /
    • 2008
  • The effect of silver nanoparticles (NPs) incorporation on the electronic properties of poly (3, 4-ethylenedioxythiphene) : poly(styrenesulfonate) (PEDOT : PSS) films was investigated. The surface of silver NPs was stabilized with trisodium citrate to control the size of silver NPs and prevent their aggregation. We obtained ca. 5 nm sized silver NPs and dispersed NPs in PEDOT : PSS solution. Sheet resistance, surface morphology, bonding state, and work function values of the PEDOT : PSS films were modified by silver NPs incorporation as well as annealing temperature. Sodium in silver NPs solution could lead to a decrease of work function of PEDOT : PSS; however, large content of silver NPs have an effect on the increase in work function, resulting from charge localization on the silver NPs and a decrease in the number of charge-trapping-related defects by chemical bond formation.

유전체 층을 이용한 수중 은 나노입자의 소형화 제조 (Finer Silver Nano-Particle Producing in Water Utilizing a Dielectric Bed)

  • 문재덕
    • 전기학회논문지
    • /
    • 제59권12호
    • /
    • pp.2250-2255
    • /
    • 2010
  • An fine silver particle has a variety of uses, such as in killing micrograms and as catalysts. Many techniques have been used for the production of the fine particles. Faraday cell, consisting of two silver electrodes in an electrolyte, is unique, but it is hard to get a very fine particle by this method. A finer silver nano-particle producing cell, utilizing a dielectric bed as a lower electric current and higher field controlling means, has been proposed and investigated. The I-V characteristics of the cell and effect of the dielectric bed on the producing finer silver nano-particles have been investigated. The I-V characteristics of the cell with the dielectric bed were different from that of the same system without the bed, due to the increased cell resistance and elevated electric field intensity. It is found that the proposed cell with the dielectric bed can produce finer silver nano-particles effectively, which, however, can be used as one of effective fine silver nano-particle producing means.

실버세대를 위한 서비스드레지던스의 디자인 지침에 관한 연구 (A Study on the Design Guidances of Serviced Residence for New Silver-Generation)

  • 이재진;김문덕
    • 한국실내디자인학회:학술대회논문집
    • /
    • 한국실내디자인학회 2007년도 춘계학술대회 논문집
    • /
    • pp.119-124
    • /
    • 2007
  • This study focuses on the design guidelines for planning and implementing the spatial characteristics in the living environment for the New Silver-Generation through the case analysis of "Serviced Residence", which has recently become very popular due to active demands for handy functions and services in flew Silver-Generation living environment. Nowadays, with relaxation of the phenomenon of lack of available houses, the focus of the construction market has shifted from builders to customers. Also, with the advent of the New Silver-Generation with money to spend to improve the quality of their lives, there has been high demand for living environment that provides high-quality services for comfort and convenience. Means to provide high-quality services for comfort and convenience in New Silver-Generation environment warrant much consideration, and hence the current study on Serviced Residence, which has become very popular has been taken up. This study on Serviced Residence will point out the problems found in the current Silver Residence environment and it will serve as an alternative for the living environment of the Silver Generation.

  • PDF

Inkjet patterning of Aqueous Silver Nano Sol on Interface-controlled ITO Glass

  • Ryu, Beyong-Hwan;Choi, Young-Min;Kong, Ki-Jeong
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.1552-1555
    • /
    • 2005
  • We have studied the inkjet patterning of synthesized aqueous silver nano-sol on interface-controlled ITO glass substrate. Furthermore, we designed the conductive ink for direct inkjet patterning on bare ITO glass substrate. The first, the highly concentrated polymeric dispersant-assisted silver nano sol was prepared by variation of molecular weight and control of initial nucleation and growth of silver nanoparticles. The high concentration of batch-synthesized silver nano sol was possible to 40 wt%. At the same time the particle size of silver nanoparticles was below $10{\sim}20nm$. The second, the synthesized silver nano sol was inkjet - patterned on ITO glass substrate. The connectivity and width of fine line depended largely on the wettability of silver nano sol on ITO glass substrate, which was controlled by surfactant. The relationship was understood by wetting angle. The fine line of silver electrode as fine as $50{\sim}100\;{\mu}m$ was successfully formed on ITO glass substrate. The last, the direct inkjet-patternable silver nano sol on bare ITO glass substrate was designed also.

  • PDF

은이온 교환 A형 제오라이트로 부터의 은이온용출이 항균력에 미치는 영향 (Effect of antibacterial activity on the elution of silver ions from A-type zeolite supporting silver ions)

  • 이무강;신현무;임경천
    • 한국환경과학회지
    • /
    • 제13권1호
    • /
    • pp.89-97
    • /
    • 2004
  • An author has been known that A-type zeolite supported with silver ions has excellent antibacterial activity. However, it is no research of concern in the antibacterial activity of eluted silver ions. This study tested the elution of silver ions from A-type zeolite silver ions in deionized distilled water and NaNO$_3$ aqueous solution. In NaNO$_3$ aqueous solution of 74mM to 588mM, it was found that the concentration of silver ions and electric conductivity increased with the increasing concentration of sodium ions, and equilibrated at 15 min, and the ion exchange equilibrium coefficient, k, is 1.3${\times}$10$\^$-3/. However, deionized distilled water is not equilibrated to pass 6 months. A-type zeolite sodium ions showed no antibacterial activity. It was found that antibacterial activity was exhibited even at the concentration of 10 nM of eluted silver ions, and E-coli died with the incorporation of 2.43${\times}$10$\^$8/ Ag ion/cell. antibacterial activity of A-type zeolite silver ions were mainly attributed to hydroxyl radical.

나노입자를 첨가한 전극용 무연 silver 페이스트의 제조 (Preparation of Lead-free Silver Paste with Nanoparticles for Electrode)

  • 박성현;박근주;장우양;이종국
    • 열처리공학회지
    • /
    • 제19권4호
    • /
    • pp.219-224
    • /
    • 2006
  • Silver paste with low sintered temperature has been developed in order to apply electronic parts, such as bus electrode, address electrode in PDP (Plasma Display Panel) with large screen area. In this study, nano-sized silver particles with 10-30 nm were synthesized from silver nitrate ($AgNO_3$) solution by chemical reduction method and silver paste with low sintered temperature was prepared by mixing silver nanoparticles, conventional silver powder with the particle size 1.6 um and Pb-free frit. Conductive thick film from silver paste was fabricated by screen printing on alumina substrate. After firing at $540^{\circ}C$, the cross section and surface morphology of the thick films were analyzed by FE-SEM. Also, the sheet resistivity of the fired thick films was measured using the four-point technique.

증발-응축법에 의해 발생된 은(silver) 나노입자의 구조제어 및 전기적 부착 특성 연구 (Morphological control and electrostatic deposition of silver nanoparticles produced by condensation-evaporation method)

  • 김휘동;안지영;김수형
    • 한국입자에어로졸학회지
    • /
    • 제5권2호
    • /
    • pp.83-90
    • /
    • 2009
  • This paper describes a condensation-evaporation method (CEM) to produce size-controlled spherical silver nanoparticles by perturbing coagulation and coalescence processes in the gas phase. Polydisperse silver nanoparticles generated by the CEM were first introduced into a differential mobility analyzer (DMA) to select a group of silver nanoparticles with same electrical mobility, which also enables to make a group of nanoparticles with elongated structures and same projected area. These silver nanoparticles selected by the DMA were then in-situ sintered at ${\sim}600^{\circ}C$, and then they were observed to turn into spherical shaped nanoparticles by the rapid coalescence process. With the assistance of modified converging-typed quartz reactor, we can also produce the 10 times higher number concentration of silver nanoparticles compared with a general quartz reactor with uniform diameter. Finally, the spherical silver nanoparticles with 30 nm were electrostatically deposited on the surface of silicon substrate with the coverage rate of ~4%/hr. This useful preparation method of size-controlled monodisperse silver nanoparticles developed in this work can be applied to the various studies for characterizing the physical, chemical, optical, and biological properties of nanoparticles as a function of their size.

  • PDF