• Journal of Korean Society on Water Environment
• /
• v.25 no.5
• /
• pp.742-749
• /
• 2009

To examine the characteristics of the nutrient release from the sediments in two reservoirs, Lake Paldang and Lake Cheungpyeung, we analyzed physical and chemical properties of the sediments and calculated the nutrient release rates from the sediments. The particle properties of sediments in Lake Paldang changed from silt to sand after summer rainy season, especially in the water area of the Kyeungan River where the water depth was shallow and the width of river was narrow. The sediments in Lake Cheungpyeung had higher contents of silt and clay than in Lake Paldang, and the particle size was not much different before and after rainfall. The release rates of nutrients in two lakes varied with the kind of nutrients and the season. The release rates of DTN and ${NH_4}^+-N$ in Lake Paldang were faster in spring than autumn. But the Lake Cheungpyeung showed similar values of release rates before and after summer rainy season. ${NO_3}^--N$ and phosphorous were not released from sediments or were absorbed into sediments all the time in two lakes. Compared with other lakes, the sediments of two lakes consisted of bigger particles and had a lower organic matters content than other lake-type reservoirs. Due to the short hydraulic retention time and no stratification throughout the year in Lake Paldang and Lake Cheungpyeung, the release rates of nutrients from sediment in these reservoirs were lower than other lakes and this seems to be a typical characteristic of river-type reservoirs.

• Journal of Environmental Science International
• /
• v.28 no.12
• /
• pp.1085-1099
• /
• 2019

We investigated the spatial and temporal variation in characteristics and pollution assessment of sediments in the watersheds of Andong-Dam and Imha-Dam, in Korea. Surface sediments were collected from six sites once a year for three years (2015-2017), and analyzed for organic matter (water content, IL, COD, TOC, TN, and TP), grain size, and concentration of trace metals (Al, Li, Zn, Cr, Pb, Cu, Ni, and As). Organic matter generally tended to increase, and was higher in the Andong watershed compare to Imha watershed. Surface sediments were mainly composed of silt. Coarse sediments were mainly distributed at the site adjacent to Andong-Dam, and showed fining after coarsening. Fine sediment were mainly distributed at the site adjacent to Imha-Dam, and were gradually coarsening. Concentration of trace metals generally tended to increase, and was higher for sites in watershed of Andong watershed (PLI > 1) than for sites in Imha watershed (PLI < 1). Trace metals in the study area were considered to be affected by fine sediment (silt), and contamination of trace metals was somewhat affected by Pb, and greatly affected by Zn and As.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.3
• /
• pp.87-94
• /
• 2013

As sediment contamination problems have recently been raised in Korea, the need for technologies to remove contaminants in sediments has increased. Contaminated sediments in Korea has been annually dredged and treated using processes of coagulation/flocculation, sedimentation on barges, dewatered and dried at prepared site, and then disposed at a landfill site, which is very costly, and only a limited landfill space available in Korea. Contaminants in media containing a high percentage of silt and clay sized particles, typically, are strongly adsorbed on the particles and difficult to remove. Particle separation processes that separate the fine clay and silt particles from the coarser sand and gravel and concentrate the contaminants into a smaller volume of sediment that can be further treated of disposed of, are very effective in the post step processes. In this study are to test the feasibility of treating dredged sediments using a hydrocyclone process, and to estimate design parameters for a pilot scale test. A hydrocyclone was operated to separate larger particles from the sediments. It was found that the particle separation was greatly affected by the solid contents and inlet pressure in the hydrocyclone.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1176-1180
• /
• 2011

The present study evaluated the soil microbial communities by fatty acid methyl ester (FAME) method in paddy soils at 11 sites for silt loam, 4 sites for sandy loam, and 5 sites for loam in Gyeongnam Province. The FAME content of fungi in loam ($76nmol\;g^{-1}$) was higher than that of in sandy loam ($45nmol\;g^{-1}$). Sandy loam had significantly lower ratio of cy19:0 to 18:$1{\omega}7c$ compared with that of silt loam (p<0.05), indicating that microbial stress decreased. In addition, actinomycetes community of loam was higher than that of sandy loam.

• Korean Journal of Organic Agriculture
• /
• v.31 no.1
• /
• pp.95-106
• /
• 2023

Entomopathogenic fungi are one of the microorganisms distributed worldwide, and they inhabit not only insects but also soils of various regions such as agricultural land and forest areas. In this study, entomopathogenic fungi distributed in the soil of forest areas in Korea were isolated using the insect-baiting method, and the relationship between the distribution and diversity of entomopathogenic fungi and the physical/chemical characteristics of the soil was analyzed. The soils were collected from five forest areas in Korea, and a total of 42 entomopathogenic fungal isolates were isolated from the collected soils. Among them, Beauveria bassiana (42.9%) and Metarhizium anisopliae (45.2%) were mainly isolated. In particular, it was confirmed that the distribution of M. anisopliae varies depending on the total nitrogen (g/kg) and organic matter content (%) of the soil. The soils in forest areas in Korea have a low pH of 4-5. Among all isolates, >50% of entomopathogenic fungi were isolated from silt loam. This study suggests that it will be helpful in understanding the relationship between the distribution and diversity of entomopathogenic fungi and the physical and chemical characteristics of soil.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.11
• /
• pp.157-166
• /
• 2008

To investigate the relationship between compressive strength ($q_u$) of Lightweight Air-mixed soil (LAS) and its physical deformation coefficient ($E_{50}$), a series of unconfined compressive tests have been performed on specimens of LAS according to various dredged soil types by percentage of sand, silt and clay. From the results it was found that the cement content ($C_i$) and unit weight (${\gamma}_m$) are most influence factors on strength, and percentage of sand, silt, clay by grain size analysis (KS F2302) have more effect on compressive strength than other physical properties of soil. It was also found that the rate of strength (a) increases with curing time, but it reduces with the increase of percentage of clay ($C_%$).

• Journal of the Korean Geotechnical Society
• /
• v.21 no.9
• /
• pp.53-64
• /
• 2005

For geotechnical design in practice, soils are, in general, assumed to behave as a linear elastic or perfect plastic material. More realistic geotechnical design, however, should take into account various factors that affect soil behavior in the field, such as non-linearity of stress-strain response, stress history, and water content. In this study, a series of laboratory tests including triaxial and resonant column tests were peformed with sands of various silt contents, relative densities, stress states, OCR and water contents. This aims at investigating effects of various factors that affect strength and stiffness of sands. From the results in this study, it is found that the effect of OCR is significant for the intermediate stress-strain range from the initial to failure, while it may be ignored for the initial stiffness and peak strength. For the effect of water content, it is observed that the initial elastic modulus decreases with increasing water content at lower confining stress and relative density At higher confining stresses, the effect of water content Is found to become small.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.155-165
• /
• 2003

A series of one-dimensional cylinder sedimentation test, seepage consolidation test and two-dimensional deposition model test were conducted to examine the characteristics of deposition and volume change of dredged soils containing the high water content, and these experimental results were compared with the sedimentary conditions of actual dredged-reclaimed fields to obtain the relations of a volume change by settling what is required for design. In addition, the change of water content and the distribution of fine grained soils after sedimentation were investigated. Thus, it was concluded that deposition height increased lineary as substantial soil volume increased, and also the elevation of interface increasea proportionately at both the starting time and the finishing time of virtual self-weight consolidation in one-dimensional sedimentation. Furthermore, the two-dimensional model test results were shown to describe the plain distribution of water content and fine grained silt where dredged soil was deposited by two dimensional flowing, and the water content was distributed to wide range from the minimum water content 30% to maximum 180% according to the passed amount of №200 sieve percentage.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.97-106
• /
• 2012

In order to investigate mechanics of mixtures composed of sand and non-plastic silt, various specimens, with sand dominating the soil structure, and with varying fines content, fines content varying were produced. Isotropic consolidation tests were performed using high pressure triaxial test apparatus within high pressure levels where sand grain crushing happened. Experimental results showed that compressive curve of sand after yielding contracts to the NCL due to breakage of sand grains. Moreover, with the increase of fines content, coarse grains are surrounded by fines to form cushion effect, which made the breakage of coarse grains become difficult. Therefore, the maximum inclination of compressive curve became flatter and yield stress increased.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.2
• /
• pp.158-164
• /
• 1996

This survey was conducted to investigate the distribution of heavy metal contents in medicinal plants and soils. Plant and soil samples were collected at 254 sites(Angelica gigas : 81, Astragalus membranceus : 38, Platycodn glandiflorum : 36, Paeonia albilora : 34, Codonopsis lanoceolata : 32, Ligusticum chuanxiong : 17, Bupleurum falcatum : 16, respectively) over the country, Soil texture, pH values and heavy metal content of soils and medicinal plants were evaluated as major factors. Soil texture classification showed that sandy loam, loam, loamy sand and silt loam were 46.1%, 26.0%, 19.3% and 8.6% of the total, respectively. The contents of O.M, Ex.Ca. Ex.Mg and EC value were higher in loamy(sandy loam, loam and silt loam)soils than in sandy(loamy sand)soils, but available $P_2O_5$ contents of loamy sand soils were higher than those of sandy loam, loam, and silt loam. The contents of Cd, Cu, Pb, Zn and Ni in soil were high in loamy soils, while Cr content was high in loamy silt soils. The contents of Cu and Cr in Angelica gigas were high in loamy soils, and those of Pb in Astragalus membranceus, Paeonia albiflora and Codonopsis lanoceolata were high in sandy loam soils. Correlation coefficients between heavy metal contents in medicinal plants and their soils with soil texture were positively correlated in sandy loam and loam at Cu, loam at Zn, sandy loam, loam and loamy sand at Cr, respectively. Correlation coefficients between pH value of the soils and contents of Cd, Zn and Ni in medicinal plants were negatively correlated, but those of Cd, Pb, Zn and Ni in soils were positively correlated.