• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.138-156
• /
• 2023

Some of the metal cultural heritage that make up a considerable proportion of Korea's cultural heritage have been installed and displayed outdoors due to their own functions, roles, and scale. Therefore, more diverse and complex damages can occur outdoors than they are in a stable environment. Therefore, it is necessary to combine accurate diagnosis and systematic survey methods in order to utilize basic data obtained from research results as data for the long-term and continuous conservation management as well as to do the research to diagnose the conservation status of outdoor cultural heritage. The clepsydra(hereinafter referred to as Jagyeongnu) of Changgyeonggung Palace, the National Treasure has been installed and displayed outdoors since it was manufactured. Though regular conservation and maintenance of the Jagyeongnu have been carried out, damage still occurred. Therefore, the scientific research on Jagyeongnu to diagnose the state of conservation was conducted prior to the full-scale conservation treatment. First, the state of conservation was investigated with an examination of basic data, macroscopic inspections and past records of repair history according to the purpose of the research. More detailed examinations were also conducted through the 3D scan, surface pattern investigation, and color difference analysis, and the analysis on materials and contaminants were conducted through P-XRF, FT-IR, and Py-GC/MS. The scientific research reveals that squalane and silicone oil have been applied in the past for conservation treatment and directly exposed to outdoor environmental factors, which caused damage to Jagyeongnu and contaminants such as dust adhered thickly to its surface, accelerating severe damage. A greater incidence of damage was found around the part with relatively high exposure effect, which corresponded with the tendency identified by grouping color difference data. As a result of integrating various research methodologies to diagnose the state of conservation and secure basic data, the causes and types of damage were identified. Furthermore, the process of obtaining digital data to be utilized in various ways, and the color difference analysis presenting visible damage as scientific data and identifying the tendency of damage patterns were confirmed to have been effective.

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.34-40
• /
• 1993

Nylon 6 based magnetic pellets for injection molding were produced using plasma arc melt-spun $Nd_{10.5}Fe_{79}Co_{2}Zr_{1.5}B_{7}$ powders. Two sorts of bonded magnets made of two different sizes of particles ($38~75\;\mu\textrm{m}$ and $75~150\;\mu\textrm{m}$) were prepared to determine critical volume fraction of magnet powders, and the magnetic prop erties of the magnets were discussed as a function of density. For the nylon fi based Nd-Fe-Co-Zr-B pellets made of $38~75\;\mu\textrm{m}$ particles, the critical volume fraction of powders 0.7 was obtained with the pellet density which is 90% of theoretical density while the magnets of $75~150\;\mu\textrm{m}$ showed the density of 87% of the theoretical value with the same volume fraction. The nylon (i magnets with the addition of 0.5 wt. % silicon oil only exhibited the best magnetic properties to have $_{i}H_{c}=8.8\;kOe,\;B_{r}=5.1\;kG$ and $(BH)_{max}=5.2\;MGOe$ which are of world class. An empirical relationship in predicting the magnet density with a known fraction ($V_s$) of loading powders was obtained such as ${\rho}(g/cm^{3})=1.1+K.V_{s}$ where the K ranges over 5.3~5.6 be ing dependent upon the particle size loaded.

• Archives of Plastic Surgery
• /
• v.37 no.3
• /
• pp.233-238
• /
• 2010

Purpose: As the use of soft tissue fillers becomes more popular, complications such as foreign body granuloma (FBG) are increasing. We report 120 cases of facial FBG and review the available literatures. Methods: 120 patients of facial FBG in our clinic from Mar. 2003 to Feb. 2008 were complied and analyzed. A retrospective chart review was done and patient satisfaction was evaluated with a questionnaire using 5 score scale. Patients with severe inflammation sign or bizarre deformity underwent surgical excision and those with minimal symptoms or a history of hyaluronic acid injection received injection therapy using hyaluronidase. Results: 100 females and 20 males were observed. The average age was 43.7 years (from 16 to 74). 84 patients received surgical therapy and 36, injection therapy. Deformity of facial contour, foreign body sensation and inflammation sign were the three main chief complaints. 84 patients did not know what the injection materials were. The known materials are as follows: collagen, hyaluronic acid, silicone oil, paraffin. 92 cases were performed by unlicensed practitioners, 29 by physicians. Anatomical site most frequently affected by the foreign body granuloma was the cheek (25.8%), followed by forehead (19.2%), lips (15.8%), nose (9.2%), mentum (8.3%), eyelid and eyebrow (4.3%) and temple (0.8%). In 21 patients (17.5%), FBGs were found on multiple sites. Patients with inflammation sign got the highest satisfaction ($3.19{\pm}0.73$) (p=0.001) among 3 chief complaints. And patient satisfaction was statistically higher in surgical therapy group ($3.43{\pm}0.72$) than in injection therapy group ($2.97{\pm}0.88$) (p=0.003). Conclusion: We suggest that it may be beneficial to tailor the type of treatment for FBG relying on wound state and patient's chief complaints. In surgical therapy, resolute approach is necessary to correct facial deformity definitely and to minimize inflammation. Injection therapy could be another option for those with minimal symptoms or a history of hyaluronic acid injection. To prevent foreign body granuloma, not only plastic surgeons but also other physicians should inject soft tissue fillers with great caution and we should warn the public of disastrous consequences associated with illegal medical practice.

• Korea-Australia Rheology Journal
• /
• v.21 no.4
• /
• pp.269-280
• /
• 2009

The drop formation dynamics of a shear thinning, elastic, yield stress ($\tau_o$) fluid (Carbopol 980 (poly(acrylic acid)) dispersions) in silicone oil has been investigated in a flow-focusing microfluidic channel. The rheological character of each solution investigated varied from Netwonian-like through to highly non-Newtonian and was varied by changing the degree of neutralization along the poly (acrylic acid) backbone. We have observed that the drop size of these non-Newtonian fluids (regardless of the degree of neutralisation) showed bimodal behaviour. At first we observed increases in drop size with increasing viscosity ratio (viscosity ratio=viscosity of dispersed phase (DP)/viscosity of continuous phase (CP)) at low flowrates of the continuous phases, and thereafter, decreasing drop sizes as the flow rate of the CP increases past a critical value. Only at the onset of pinching and during the high extensional deformation during pinch-off of a drop are any differences in the non-Newtonian characteristics of these fluids, that is extents of shear thinning, elasticity and yield stress ($\tau_o$), apparent. Changes in these break-off dynamics resulted in the observed differences in the number and size distribution of secondary drops during pinch-off for both fluid classes, Newtonian-like and non-Newtonian fluids. In the case of the Newtonian-like drops, a secondary drop was generated by the onset of necking and breakup at both ends of the filament, akin to end-pinching behavior. This pinch-off behavior was observed to be unaffected by changes in viscosity ratio, over the range explored. Meanwhile, in the case of the non-Newtonian solutions, discrete differences in behaviour were observed, believed to be attributable to each of the non-Newtonian properties of shear thinning, elasticity and yield stress. The presence of a yield stress ($\tau_o$), when coupled with slow flow rates or low viscosities of the CP, reduced the drop size compared to the Newtonian-like Carbopol dispersions of much lower viscosity. The presence of shear thinning resulted in a rapid necking event post onset, a decrease in primary droplet size and, in some cases, an increase in the rate of drop production. The presence of elasticity during the extensional flow imposed by the necking event allowed for the extended maintenance of the filament, as observed previously for dilute solutions of linear polymers during drop break-up.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.3
• /
• pp.227-231
• /
• 2010

Among various make-up products, foundations are widely used to express clear and flawless skin. Foundations can be classified by its formula to 3 types, liquid foundation, powder foundation, and oil dispersion foundation. Powder foundations are easy to carry and use, so it is commonly possessed. In the R&D point of view, the developing method of powder foundations can be classified again to 3 types. Dry-process, baked-process, and the wet slurry-process. The fact that the wet slurry-process goes through either the back injection method or the front injection method is previously known. The front injection process is used as the main method in this study. We observed the quality dependence on the kind of solvent and the powder coating system. In brief, when water was used as the main solvent, the hardness increased than when volatile silicones or hydrocarbons were used. And the sensory results were shown to prefer volatile solvents (silicones or hydrocarbons) over water. Similarly, when the amino acid-coating system was applied, the hardness was shown to increase, when silicone-coating system shown no specific change. By these results, tailor-made powder foundations targeting specific customer grades can be easily produced.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.553-561
• /
• 2020

Water-soluble rubber asphalt-based waterproofing material, which is one of the waterproofing materials for building structures, is mainly used indoors (toilet, kitchen, balcony, etc.). In general, asphalt-based materials are used for non-exposed installation, rather than as exposed type as they do not deviate from their usual basic black pigmentation, and water-soluble rubber asphalt-based coating waterproofing materials are basically limited to indoors because of their low physical properties. Accordingly, in order to improve the tensile and elongation properties, a silane coupling agent, an inorganic filler, and a processor oil w ere added to improve the physical properties, and accordingly, the basic physical properties of the outdoor coating waterproofing material quality standard were analyzed. As a result, the water-soluble rubber asphalt coating waterproofing material compared with the exposure quality standard showed a result that exceeded the basic physical property quality standard of silicone rubber in all items under test evaluation, but the tensile strength and tear strength of the first class of urethane rubber were chloroprene. It was found that the performance compared to the quality standards of rubber-based tear strength was about 34.2% to about 40.8%.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.132-138
• /
• 2022

In this study, a basic study was performed to systematically compare the changes in surface properties according to the post-processing method of the stereolithography (SLA) printing method, which is a photocuring 3D printing method, and to provide information on the post-processing method suitable for the application. Although it was possible to improve some of the transparency of the SLA-type output by regularly changing the irregular microstructure of the surface through polishing, it was difficult to secure sufficient transparency like glass. The change in contact angle characteristics due to grinding showed a tendency to slightly increase as the grinding time increased and the particle size of the sandpaper used was small, but the variation between samples was large and the average contact angle was 77~90°, showing no statistically significant difference. Surface treatment methods other than polishing were tried, and it was confirmed that it was possible to easily and simply improve the transparency by applying a commercially available vehicle scratch remover or silicone oil. In addition, a method for securing high transparency such as glass by using a scratch remover after sequential grinding while reducing the particle size of the sandpaper was proposed. Finally, even after surface treatment through polishing and various methods, it was difficult to secure a contact angle of 90° or more.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.423-430
• /
• 2022

Pressure-dependent elastic behavior and chemical reaction of natural sepiolite (Mg₈Si₁₂O₃₀(OH)₄·12H₂O) was studied under two different pressure-transmitting medium (PTM) conditions using synchrotron X-ray powder diffraction. Under non pore-penetrating silicone oil PTM, we observed that the b-axis length increases up to ca. 3.6 GPa, marking an anisotropic compression region with negative linear compressibility of β^b= -0.0012 GPa^-1, which then decreases at 7.7 GPa. Under pore-penetrating water PTM, the anisotropic compression behavior is enhanced with doubled negative linear compressibility of β^b= -0.0025 GPa^-1 up to 3.2 GPa, where transformation into stevensite is observed upon ex-situ temperature treatment at 280 ℃ as confirmed via XRD and SEM. Derived bulk moduli (K₀) and linear compressibilities (β) were compared to other structurally and chemically related minerals.