• Journal of Ginseng Research
• /
• v.21 no.1
• /
• pp.13-18
• /
• 1997

Identification and changes of physiologically active substances during chilling storage of dehisced ginseng (Panax ginseng C. A. Meyer) seeds were analyzed using various preparatory separation methods and purification columns; Dowex 50W and silica gel columns. Seven components with Rf values of 0.20, 0.40, 0.58, 0.66, and 0.70 In solvent system, $CHCl_3$:MeOH=3:1 (v/v), Rf values of 0. 63 and 0.74 in solvent system, $CHCl_3$:MeOH:$H_2O$:=7:3:1 (v/v) were obtained through Dowex 50W and silica gel column chromatographies. Two components with Rf values of 0.20 and 0.63 in the all chilling treatments were detected in the extract obtained through both chromatographies, and only the former component was gradually increased till 4 weeks of chilling storage and then rapidly decreased from 8 to 16 weeks. UV spectra of Rf values of 0.66 and 0.56 were similar to that of cytokinin, but their physiological activities were not found. Rf values of 0.20 showed activity by radish cotyledon expansion bioassay. The component with Rf value of 0.20 was revealed to have a naphthalene in the proposed chemical structure by various NMR techniques.

• Applied Biological Chemistry
• /
• v.38 no.6
• /
• pp.577-580
• /
• 1995

During the screening for the antimicrobial agents against multidrug-resistant Staphylococcus aureus, we isolated an active compound produced by strain CNU30122. The active compound was purified from culture broth by HP-20 column chromatography, ethylacetate extraction. silica gel column and Sephadex LH-20 column chromatographies and HPLC. Based on various NMR studies including $^1H-^1H\;COSY$, $^1H-^{13}C\;COSY$ and HMBC experiments. the active compound was identified as fusidic acid.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.231-234
• /
• 2003

CS와 실란의 반응시 생성된 실란올들이 동종간의 반응에 비하여 실리카 표면과의 반응이 진행되는 효과에 따라서, 그리고 실란들의 종류에 따라 경화밀도와 재료특성이 상당히 달라지게 된다. 본 논문에서는 CS/MTMS 졸반응에서 CS의 종류, CS/MTMS의 함량비, 졸의 반응시간 등을 인자로 하여 졸들을 합성하고 겔화된 도막의 물성들을 조사하였다. 그 결과 MTMS의 함량과 비례하여 친수성은 증가하고 표면조도는 나아지는 것을 알 수 있었고 반응시간에 비례하여 친수성은 감소하고 표면조도는 안 좋아지는 것을 알 수 있었다. 그리고 내열성은 MTMS의 함량이 적을수록 좋은 결과를 나타내었다.

• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.111-116
• /
• 2007

Polyurethane modified acrylate $(PUA)/SiO_2$ hybrid films were prepared by ultraviolet curing and their surface properties were investigated by hardness and adhesion test. The films were examined by the manipulation of mole-ratio of organic to inorganic components. Under the silica content controlled, highly desirable films were achieved and scratch resistance and hardness property of film were also enhanced, which indicates that the crosslinked silica particles are homogeneously dispersed within PUA film.

• The Korean Journal of Rheology
• /
• v.10 no.1
• /
• pp.24-30
• /
• 1998

솔젤법을 이용하여 단분산의 실리카 입자를 제조하고 농도변화에 따른 실리카 분산 액의 유변학적 거동을 해석하였다. 단분산 실리카 입자의 제조는 솔젤법을 이용한 액상반으 으로 제조하였고 입자의 안정화를 위하여 입자표면에 실란커플링제를 코팅하여 유기용매에 서 안정성을 갖도록 하였다. 분산액의 농도에 따른 유변학적 거동을 조사하기 위하여 부피 분율( )이 0.05인 희박 분산계로부터 =0.55의 고농도 분산계를 제조하였다. 솔젤법을 통하 여 단분산 실리카 입자를 성공적으로 제조하였으며 실란커플링제인 ${\gamma}$-methacryloxypropyl triethoxysilane로 입자의 표면을 화학적 방법으로 처리하여 유기용매 상에서 알킬기의 작용 에 의한 hard-sphere'특성을 나타내도록 하였으며 동시에 분산안정성을 유지할수 있었다. 입자 분산계는 =0.25이하의 부피농도에서는 분산용매와 같은 뉴톤거동을 보여주었으며 이 이이상의 농도에서는 비뉴톤거동인 전단담화(shear thinning)현상과 high shear limiting viscosity를 나타내었다. 이결과는 Krieger-Dougherty 식을 따름이 확인되었으며 부피분율 =0.50정도까지도 이식이 잘적용됨을 확인하였다. 부피분율 =0.50 이상의 고농도 입자 분산계 는 급격한 점도의 증가와 함께 전단담화와 전단탁화(shear thickening)현상이 모두 관찰되었 다. 특히 전단탁화를 일으키는 특헝전단변형률(cr)이하의 전단변형률에서는 안정되고 빠른 점성반응(viscous response)을 보여주었으나 특성 전단변형률 부근과 이상의 전단변형률 영 역에서는 매우 불안한 거동이 보여짐을 확인하였다. 그러나 이러한 점도 거동은 가역적이며 전단변형률을 증가시킬때와 감소시킬 때의 유변학적 거동이 거의 일치하였다.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.10
• /
• pp.1085-1089
• /
• 1997

A new HPLC chiral stationary phase (CSP 3) has been prepared by connecting N-phenyl N-propyl amide of (S)-naproxen to silica gel through the 6-methoxy-2-naphthyl group of (S)-naproxen. The new CSP has been applied in resolving a homologous series of N-(3,5-dinitrobenzoyl)-α-amino acid esters and a homologous series of N-(3,5-dinitrobenzoyl)-α-(4-alkylphenyl)alkylamines. The separation factors, α, for resolving a homologous series of N-(3,5-dinitrobenzoyl)-α-amino esters and a homologous series of N-(3,5-dinitrobenzoyl)-α-(4-alkylphenyl)alkylamines on the new CSP have been found to remain almost constant throughout the wide range of the length of the alkyl substituent of the analytes while those on the previously reported CSPs (CSP 1 and 2) which were prepared by connecting N-phenyl N-propyl amide of (S)-naproxen to silica gel through the N-propyl group increase or decrease continuously. These results are concluded to support the chiral recognition models which utilize the intercalation of the alkyl substituent of the racemic analytes between the adjacent strands of CSP 1 or 2 to rationalize the increasing or decreasing trends of separation factors.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.8
• /
• pp.457-463
• /
• 2013

Nowadays, adsorption chillers have been receiving considerable attention, as they are energy saving and environmentally benign systems. A fin tube type heat exchanger in which adsorption/desorption takes place is required with more compact size. The adsorption chiller is expected to have high energy efficiency in utilizing the waste heat exhausted from a process. The objectives of this paper are to scrutinize the effect of design parameters on the adsorption performance, especially the fin pitch of the fin tube, and to develop an optimal design fin tube heat exchanger in a silica gel/water adsorption chiller. From the numerical results, the fin pitch of 2.5 mm shows the highest adsorption rate, compared to other fin pitches, such as 5 mm, 7.5 mm and 10mm. Also, the adsorption rate is affected by the cooling water and hot water temperature.

• Earthquakes and Structures
• /
• v.25 no.2
• /
• pp.113-123
• /
• 2023

A novel type of buckling restrained brace with built-up angle steel was developed. The core segment was formed by welding angle steel, and the middle section was reduced by cutting technology to solve the problem that the end of BRB was easy to buckle. The experimental program has been undertaken to study the performance of BRBs with different unbonded materials (silica gel, kraft paper) and different filler materials (ordinary concrete, full light-weight concrete). Four specimens were designed and fabricated for low cycle reciprocating load tests to simulate horizontal seismic action. The failure mode, hysteretic curves, tension-compression unbalance coefficient and other mechanical parameters were compared and analyzed. The finite element software ABAQUS was used to conduct numerical simulation, and the simulation results were compared with the experimental phenomena. The test results indicated that the hysteretic curve of each specimen was plump. Sustaining cumulative strains of each specimen was greater than the minimum value of 200 required by the code, which indicated the ductility of BRB was relatively good. The energy dissipation coefficient of the specimen with silica gel as unbonded material was about 13% higher than that with kraft paper. The experimental results were in good agreement with the simulation results.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.30 no.1
• /
• pp.43-51
• /
• 2024

The addition of oxygen scavengers to food products helps to reduce oxygen exposure, thereby mitigating deterioration, including changes in taste, odor, and color, as well as inhibiting microbial growth. Despite the advantages of the existing non-metallic oxygen removal materials in terms of safety for the human body and suitability for use in microwave ovens, their utilization has been limited due to their slow reaction initiation speed. Therefore, in the current study, sodium metabisulfite was impregnated into various porous media, including halloysite nanoclay, activated carbon, montmorillonite, and silica gel. The oxygen scavenger, produced by impregnating silica gel with sodium metabisulfite, demonstrated a 425% improvement in the initial oxygen removal rate compared to pure sodium metabisulfite. Additionally, sachets containing an oxygen-removing composition with an enhanced oxygen removal rate effectively decreased the oxygen concentration to less than 0.5% on the third day of storage in apple packaging, without elevating carbon dioxide levels. Moreover, it proved effective in preventing the browning of the apple surface. Therefore, the SM/SG oxygen-removal composition can be effectively applied to active food packaging by controlling the oxygen concentration within the packaging.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_2
• /
• pp.981-989
• /
• 2024

In recent years, there has been a growing focus on preserving the global environment and utilizing resources efficiently. The significance of energy conservation has led to the development of systems that recycle waste heat from factories and use eco-friendly refrigerants. This study aims to enhance the performance of adsorption-desorption systems using thermoelectric devices, which are known for their ability to convert temperature differences into electrical energy. The research focuses on improving the efficiency of these systems by integrating thermoelectric modules to cool the adsorption side and heat the desorption side, thus enhancing overall system performance. The experiments utilized a typical thermoelectric device and silica gel as the adsorbent. Key experimental parameters included varying the inlet air temperature and relative humidity on the desorption side. The results indicated that increasing the relative humidity of the inlet air on the desorption side significantly enhanced the overall mass transfer coefficient while reducing the completion time of the process. Similarly, higher inlet air temperatures led to an increase in the mass transfer coefficient and a decrease in process completion time. These findings suggest that optimizing the operational conditions of thermoelectric devices can substantially improve the performance of adsorption-desorption systems, offering potential benefits for applications in ventilation systems and other related fields.