• Computers and Concrete
• /
• v.20 no.6
• /
• pp.705-710
• /
• 2017

The effectiveness of mineral additives in suppressing alkali-silica reactivity has been studied in this work. Experimentation has been performed in accordance with the procedures prescribed in ASTM C 1567. In the scope of the investigation, a quarry aggregate which was reactive according to ASTM C 1260 was tested. In the experimental program, prismatic mortar specimens measuring $25{\times}25{\times}285mm$ were produced. Ten sets of production, three specimens for each set, were made. Length changes were measured at the end of 3, 7, 14 and 28 days and then expansions in percentage have been calculated. Fly ash, silica fume, and metakaolin have been used as cement replacement in different ratios for the testing of the alkali-silicate reactivity of the aggregate. In the mixes performed, the replacement ratios were 20%, 40%, and 60% for the fly ash, and 5%, 10%, and 15% for the silica fume, and 5%, 10%, and 15% for the metakaolin. Mixes without mineral additives were also produced for comparison. The beneficial effect in suppressing alkali-silica reactivity is highly noticeable as the replacement ratios of the mineral additives increase regardless of the type of the mineral additive used. Being more concise, the optimum concentrations of using silica fume and metakaolin in mortar in suppressing ASR is 10%, respectively, while it is 20% for fly ash.

• Computers and Concrete
• /
• v.13 no.1
• /
• pp.97-115
• /
• 2014

Silica fume is a by-product of induction arc furnaces and has long been used as a mineral admixture to produce high-strength, high-performance concrete. Due to the pozzolanic reaction between calcium hydroxide and silica fume, compared with that of Portland cement, the hydration of concrete containing silica fume is much more complex. In this paper, by considering the production of calcium hydroxide in cement hydration and its consumption in the pozzolanic reaction, a numerical model is proposed to simulate the hydration of concrete containing silica fume. The heat evolution rate of silica fume concrete is determined from the contribution of cement hydration and the pozzolanic reaction. Furthermore, the temperature distribution and temperature history in hardening blended concrete are evaluated based on the degree of hydration of the cement and the mineral admixtures. The proposed model is verified through experimental data on concrete with different water-to-cement ratios and mineral admixture substitution ratios.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.3
• /
• pp.191-197
• /
• 2009

It is very important to raise the purity of silica for manufacturing metallurgical-grade silicon because the purification of silicon in the smelting process is very difficult. In present study, the silica sand which is obtained from Vietnam was mineralogically analyzed. Based on the results, a novel process to separate impurities from the silica sand was developed, which consisted of classification, specific gravity and magnetic separation steps. Using the developed process, high-grade silica sand concentrate containing over 99.8 wt% $SiO_2$ was prepared, being suitable for manufacturing the metallurgical-grade silicon.

• The Korean Journal of Quaternary Research
• /
• v.22 no.1
• /
• pp.23-27
• /
• 2008

Paleoenvironmental evolution in South Korea is investigated on the basis of fluctuations in biogenic silica content in sediments from Cheollipo coast on western shore. The biogenic silica measurement was done by alkaline extraction technique. The concentration of the biogenic silica in the Cheollipo coastal sediments is generally low, with an average of 1.2 %. The proxy of biogenic silica records in Cheollipo sediments implies the significant difference of bio-productivity on Korean Peninsula in comparison with those in lacustrine sediments in interior terrestrial continent of the Eurasia.

• International Journal of Concrete Structures and Materials
• /
• v.18 no.1E
• /
• pp.63-70
• /
• 2006

This study tested the alkali-silica reactivity of various types of crushed stones, following the specifications of ASTM C 227 and C 1260, and the results obtained from the tests were compared. This study also analyzed the effects of particle size and grading of reactive aggregate based on the expansion of mortar-bar due to an alkali-silica. The effect of mineral admixtures to reduce the detrimental expansion caused by the alkali-silica reaction was investigated based on the method specified by ASTM C 1260. The mineral admixtures used in this study were fly ash, silica fume, metakaolin and ground granulated blast furnace slag. The replacement ratios of 0, 5, 10, 15, 25 and 35% were uniformly applied to all the mineral admixtures, and the replacement ratios of 45 and 55% were additionally applied for the admixtures that could sustain the workability at these ratios. The results indicate that replacement ratios of 25% for fly ash, 10% for silica fume, 25% for metakaolin and 35% for ground granulated blast furnace slag were the most effective in reducing the expansion due to the alkali-silica reaction under the experimental conditions of this study.

• Resources Recycling
• /
• v.18 no.6
• /
• pp.30-37
• /
• 2009

Silica sol was prepared from the mixture of sodium silicate solution and oxidized silicate solution in which sodium had been removed by sol-gel process. The properties of sodium silicate solution and silicate solution thus prepared were characterized by yellow silicomolydate method. Moreover, the formation and growth of silica sol from sodium silicate solution was investigated. Sodium silicate solution with 2% of $SiO_2$ contains 95% of reactive silicate, and 50% of reactive silicate participates sol-gel reaction. From the results of FT-IR analysis, it was found that the intensity of silanol bond decreased and the intensity of siloxane bond increased with increasing reaction temperature. Zeta potential of silica sol prepared at each condition was -40~-60 mV and it could be known that silica sol in this study was well dispersed. The silica sol with 5~10 nm size could be prepared by heating the mixed solution of sodium silicate and silicate solution. And the silica sol grew into about 20 nm as silicate solution was added to silica sol solution.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.10
• /
• pp.4883-4888
• /
• 2012

In materials science, one of the new concerns in the construction industry, it is well established that mineral dust from rocks (stones) has adverse effects on human health. For instance, it is suspected that some mineral dusts in particular leads to occupational diseases, including lung cancer. The present research concerned the relationship between cancer and those workers who work in Turkish construction industry and quarries and are exposed to silica mineral dust from natural stones. One focus was cancer prevention methods applied in-site. In mining and construction industry where stone dust is widely used, silicosis induced lung cancer is frequently seen. Cancer cases which are seen across the regions mostly affected by silica containing dust in Turkey were identified and a survey was conducted of the methods to protect workers in the construction industry from exposure to silica dust.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.98-103
• /
• 2004

Shotcrete needs the enough durability without deterioration for life time. But shotcrete is being deteriorated according to aging like concrete by internal causes whithin itself and by external causes which can be physical, chemical, or mechanical. Durable shotcrete can be made by incresing the cement content, adding chemical and mineral admixtures and so on. So, in this study, chloride ion penetration test, freeze and thaw test, neutralization test were conducted to examine the durability characteristice of shotcrete with mineral admixtures such as silica fume, blast-furnace slag and fly ash. These results indicate that shotcrete with silica fume is durable. Therefore, the present study provides a firm base to make high performance shtcrete.

• Nuclear Engineering and Technology
• /
• v.38 no.5
• /
• pp.423-426
• /
• 2006

A developed neutron activation analysis(NAA) and gamma-spectrometry were applied to improve the analytical sensitivity and precision of impurities in electronic-circuit raw materials. It is well known that soft errors in high precision electronic circuits can be induced by alpha particles emitted from naturally occurring radioactive impurities such as U and Th. As electronic circuits have recently become smaller in dimension and higher in density, these alpha-particle emitting radioactive impurities must be strictly controlled. Therefore, new NAA methods have been established using a HTS(Hydraulic Transfer System) irradiation facility and a background reduction method. For eliminating or stabilizing fluctuated background caused by Rn-222 and its progeny nuclides in air, a nitrogen purging system is used. Using the developed NAA and gamma-spectrometry, ultra trace amounts of U(0.1ng/g) and Th(0.01ng/g) in an alumina ball and high purity silica used for an epoxy molding compound (EMC) could be determined.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.31-35
• /
• 2007

The formation of silica sol from sodium silicate solution and the growth of silica sols were investigated in this study. The $SiO_2$ content of 2% in sodium silicate solution was proper to oxidize sodium silicate with sulfuric acid. After the removal of sodium ions in sodium silicate solution, the pH of silicate solution had to be controlled above 9 for a stable silicate solution. The silica sol, which size is about 10 nm, could be prepared by heating the mixed solution of sodium silicate and silicate solution removed sodium ions at pH 10 and 80. And the silica sol grew into about 50 nm as silicate solution was added to silica sol solution.