• 접착 및 계면
• /
• 제23권3호
• /
• pp.94-99
• /
• 2022

졸-겔 공정 및 용액 블렌딩 공정을 이용하여 삼성분계(그래핀/실리카/EVOH) 나노 복합 코팅 물질을 제조하였다. SEM 관찰 및 XRD 분석을 통하여 제조된 산화 그래핀의 삽입/박리 구조뿐만 아니라 나노 복합 물질 내에서의 그래핀 나노 판상체와 실리카 입자의 박리 구조 및 분산 상태를 확인하였다. 삼성분계 나노 복합 물질로 코팅된 BOPP의 산소 차단성은 산화 그래핀 및 실리카 입자를 일정 수준의 함량으로 첨가했을 때 이성분계(실리카/EVOH) 나노 복합 코팅 필름에 비해 뚜렷하게 향상되었나, 그 이상의 함량으로 첨가하면 불완전한 박리 및 그래핀 적층체의 분산과 실리카 클러스터의 미세 크랙 발생으로 인하여 차단성이 거의 일정하거나 또는 그 증가 폭이 매우 작은 것으로 나타났다. 또한 나노 복합 코팅 필름의 투명성은 그래핀 함량에 따른 필름의 광투과율을 측정함으로써 확인하였으며, 이러한 결과로부터 식품 포장 필름으로의 적용 가능성을 제시할 수 있었다.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.282-289
• /
• 2010

In preparation of silica aerogel-based hybrid coating materials, the combination of hydrophobic aerogel with organic polar binder material is shown to be very limited due to dissimilar surface property between two materials. Accordingly, the surface modification of the aerogel would be required to obtain compatibilized hybrid coating sols with homogeneous dispersion. In this study, the surface of silica aerogel particles was modified by using both surfactant adsorption and heat treatment methods. Four types of surfactants with different molecular weights and HLB values were used to examine the effect of chain length and hydrophilicity. The surface property of the modified aerogel was evaluated in terms of visible observation for aerogel dispersion in water, water contact angle measurement, and FT-IR analysis. In surface modification using surfactants, the effects of surfactant type and content, and mixing time as process parameter on the degree of hydrophilicity for the modified aerogel. In addition, the temperature condition in modification process via heat treatment was revealed to be significant factor to prepare aerogel with highly hydrophilic property.

• 접착 및 계면
• /
• 제13권4호
• /
• pp.151-155
• /
• 2012

본 연구에서는 중공형 나노 입자의 구조체가 되는 구형 폴리스티렌을 조절된 유화중합법으로 여러 크기의 구형 폴리스티렌을 제조하는 연구를 수행하였다. 유화중합에 사용되는 유화제의 농도를 조절하여 구형 폴리스티렌의 크기를 임의로 조절하였다. 이 폴리스티렌을 구조체로 이용하여 중공형 중간세공 실리카를 합성하였으며, 합성 과정 시 반응속도의 조절을 위해 에탄올을 넣어 실리카 전구체의 가수분해 속도를 조절하고, 실리카 전구체의 투여량을 조절하여 중공형 중간세공 실리카의 벽 두께를 조절하였다.

• Corrosion Science and Technology
• /
• 제22권2호
• /
• pp.99-107
• /
• 2023

Layered silicate clay montmorillonite (MMT) has been used in nanocomposite coating to improve corrosion protection by reinforcing the barrier property. The better dispersion of MMT in the coating produces a higher barrier effect. Pretreatment with MMT could favor the delamination of clay platelets, facilitating MMT dispersion in the coating. In the present work, a montmorillonite/silica (MMT/Si) composite was prepared by the in situ sol-gel method. x-ray diffraction measurements and field-emission scanning electron microscopy observations showed silica crystal formation and increased basal spacing between the MMT platelets. Composite MMT/Si particles were introduced in an epoxy resin to reinforce the corrosion protection of the coating applied on the AA2024 surface. Electrochemical impedance spectroscopy (EIS) was performed to characterize the protective property of the coating. The results demonstrated the high barrier effect of the coating containing 5 wt% of MMT/Si. Adhesion evaluation after a salt spray test exhibited a high adherence to the epoxy coating containing MMT/Si.

• Macromolecular Research
• /
• 제9권2호
• /
• pp.92-99
• /
• 2001

Silica-filled rubber compounds have slower cure characteristics than carbon black-filled ones due to the adsorption of curatives on the silica surface. Fatty acid was used as a cure activator along with zinc oxide in a sulfur cure system. Poly(ethylene glycol), PEG, was used in silica-filled rubber compounds to prevent adsorption of the curatives on the silica surface. In this study, influence of the size of fatty acid and PEG on properties of silica-filled NR compounds was investigated. It was found that the size of fatty acid and PEG affected the curt: characteristics and physical properties. The cure rate becomes faster as the PEG size increases. By increasing the size of fatty acid or PEG, the delta torque of the compound decreases while the Mooney viscosity increases. The modulus of the vulcanizate decreases with increasing the molecular weight of fatty acid or PEG. The experimental results were explained by the filler dispersion and by the prevention of the curative-adsorption on the silica surface.

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.98-101
• /
• 2011

A 10 nm nano-silica was introduced to a conventional 3 ${\mu}M$ micro-silica composite to develop an eco-friendly new electric insulation material for heavy electric equipment. Thermal and mechanical properties, such as glass transition temperature (Tg), dynamic mechanical analysis, tensile and flexural strength, were studied. The mechanical results were estimated by comparing scale and shape parameters in Weibull statistical analysis. The thermal and mechanical properties of conventional epoxy/micro-silica composite were improved by the addition of nano-silica. This was due to the increment of the compaction via the even dispersion of the nano-silica among the micro-silica particles.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.242-248
• /
• 2017

Wet masterbatch (WMB) technology is studied to develop high-content and highly disperse silica-filled compounds. This technology refers to the solidification of surface-modified silica with a rubber solution or latex. Until now, researchs based on styrene butadiene rubber (SBR)/silica WMB has been mainly performed. However, the blending of SBR/silica WMB and BR is not known and is currently under research and development. Therefore, in this study, the BR blending method suitable for emulsion (ESBR)/silica WMB is investigated by measuring their cure characteristics and the mechanical and dynamic viscoelastic properties. As a result, it was confirmed that the blending of ESBR/silica WMB and BR/silica dry masterbatch is most appropriate. However, it showed a disadvantage compared with the conventional mixing method, which was due to the surfactant remained and the sulfuric acid used as the coagulant.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.272-277
• /
• 2004

The primary aim of this study is to investigate new semi-abrasive free slurry including acid colloidal silica and hydrogen peroxide for copper chemical-mechanical planarization (CMP). In general, slurry for copper CMP consists of colloidal silica as an abrasive, organic acid as a complex-forming agent, hydrogen peroxide as an oxidizing agent, a film forming agent, a pH control agent and several additives. We developed new semi-abrasive free slurry (SAFS) including below 0.5％ acid colloidal silica. We evaluated additives as stabilizers for hydrogen peroxide as well as accelerators in tantalum nitride CMP process. We also estimated dispersion stability and Zeta potential of the acid colloidal silica with additives. The extent of enhancement in tantalum nitride CMP was verified through anelectrochemical test. This approach may be useful for the application of single and first step copper CMP slurry with one package system.

• Transactions on Electrical and Electronic Materials
• /
• 제14권2호
• /
• pp.101-104
• /
• 2013

The effect of the mixing ratio of spherical silica on the electrical insulation breakdown strength in an epoxy/silica composite was studied. Spherical silicas with two average particle sizes of $5{\mu}m$ and $20{\mu}m$ were mixed in different mixing ratios, and their total filling content was fixed at 60 wt%. In order to observe the dispersion of the silicas and the interfacial morphology between silica and epoxy matrix, scanning electron microscopy (SEM) was used. The electrical insulation breakdown strength was estimated in sphere-sphere electrodes with different insulation thicknesses of 1, 2, and 3 mm. Electrical insulation breakdown strength decreased with increasing mixing ratio of $5/20{\mu}m$ and the thickness dependence of the breakdown strength was also observed.

• Elastomers and Composites
• /
• 제37권1호
• /
• pp.14-20
• /
• 2002

실리카로 보강된 고무 배합물은 보강제의 분산이 나쁘기 때문에 카본 블랙으로 보강된 배합물에 비해 더 긴 배합 시간이 필요하다. 실리카와 카본 블랙으로 보강된 천연 고무 배합물에서 배합 공정이 물성에 미치는 영향을 연구하였다. 마스터뱃치(MB) 배합물의 최종 온도를 $150^{\circ}C$로 하였을 때, 실리카와 카본 블랙을 따로 투입하는 경우가 함께 투입하는 공정보다 배합 시간을 더 길게 가질 수 있었다. 실리카를 먼저 투입하는 것이 카본 블랙을 먼저 투입하는 것보다 배합 시간이 길었다. MB 배합 공정을 한 단계로 구성한 배합물과 두단계로 구성한 배합물을 비교하였다. 두 단계 공정으로 배합한 배합물의 스코치 시간이 한 단계 공정으로 만든 배합물의 스코치 시간보다 길었고 bound rubber 함량은 작았다. 두단계 공정으로 만든 가황물은 한단계 공정으로 만든 것에 비해 신율이 높고 인장 강도도 강하고 피로 특성도 우수한 것으로 나타났다.