• 한국해안·해양공학회논문집
• /
• 제29권2호
• /
• pp.121-127
• /
• 2017

구조물에 작용하는 실제 파랑은 다방향 불규칙파로써 장대 구조물의 경우 파의 위상차로 인해 파력의 감소효과가 발생한다. 본 연구에서는 이러한 효과가 파괴확률에 기여하는 정도를 파악하고 기존의 모듈형 방파제에 비해 어느 정도의 안정성이 확보되는지 확인하고자 기존 방파제 및 파력감소계수를 이용한 장대케이슨 방파제의 활동 파괴모드에 대해 신뢰성해석을 수행하였다. 그 결과 기존의 모듈형 케이슨 방파제보다 장대케이슨 방파제의 신뢰도지수가 더 높게 나타났고, 설계변수 중 유의파고가 가장 높은 영향을 미치는 것으로 확인되었다. 추가로 파력감소계수의 산정에 사용되는 변수들의 평균값 변화에 따른 신뢰성해석을 수행하였으며, 해석 결과 각 변수 값과 파력감소계수의 관계에서 확인된 경향이 평균값 변화에 따른 신뢰도지수 결과의 경향에 나타나는 것을 확인할 수 있었다.

• 한국해안해양공학회지
• /
• 제5권1호
• /
• pp.25-38
• /
• 1993

해양구조물의 케이블 반응 분석을 위한 다방향 파람 스펙트라의 수치모델이 조사되었다. 여러 형태의 전파모델을 파랑으로 인한 물입자의 흐름과 계류시스템을 예측하기 위해 사용하였다. 케이블에 작용하는 수동역학적 파력은 케이블의 경사에 평행한 방향과 접선방향에서의 항력과 관성력을 고려한 Morison 공식에 의해 평가되었다. 변위와 속도, 궤적, 위상면의 반응, 그리고 장력을 고려한 다방향 불규칙 파랑의 수치해석에 의하여 부체의 tether pc와 anchor point에서 계류시스템 케이블의 반응을 나타내었다. 서로 다른 항력 계수와 다양한 유의 파고, 그리고 선택된 파랑계수들이 이 분석에 고려되었다. 예제에서 고려된 특정 시스템을 통하여 파랑의 전파함수계수와 항력계수 뿐만 아니라 파랑의 주기와 높이가 케이블-부체시스템의 동적반응에 중요한 영향을 미침을 알 수 있었다.

• 식물병연구
• /
• 제20권1호
• /
• pp.1-7
• /
• 2014

Plant growth is considered the sum of cell proliferation and subsequent elongation of the cells. The continuous proliferation and elongation of plant cells are vital to the production of new organs, which have a significant impact on overall plant growth. Accordingly, the relationship between environmental stimuli, such as temperature, light, wind, and sound waves to plant growth is of great interest in studies of plant development. Sound waves can have negative or positive effects on plant growth. In this review paper we have summarized the relationship between sound waves and plant growth response. Sound waves with specific frequencies and intensities can have positive effects on various plant biological indices including seed germination, root elongation, plant height, callus growth, cell cycling, signaling transduction systems, enzymatic and hormonal activities, and gene expression.

• 대한조선학회지
• /
• 제11권2호
• /
• pp.7-14
• /
• 1974

Hydrodynamic moments produced by the rolling oscillation on the free surface and the associated swaying force were exactly calculated by Ursell-Tasai method for the cylinders with Kim's chine form sections($a_1,\;a_7$). The coefficient of the added moment of inertia $K_{\varphi^{\tau}}$, the progressive wave height ratio $\bar{A}$, the coefficient of swaying forces $K_{RS}$, ${\alpha}_{RS}$ of rolling oscillations are shown in the several figures. The results of the computation were compared with those of lewis form sections. It is concluded that the effect of the section form on the added moment of inertia is significant for the cylinder with the section of same beam-draft ratio and sectional area coefficient, on the other hand, a little effect appears on the wave damping.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권4호
• /
• pp.655-669
• /
• 2015

The Overall Motion Sickness Incidence is applied to the hull form optimization of a wave piercing high-speed catamaran vessel. Parametric hull modelling is applied to generate two families of derived hull forms, the former varying the prismatic coefficient and the position of longitudinal centre of buoyancy, the latter instead the demi-hull separation. Several heading angles are analysed in a seaway, considering all combinations of significant wave height and zero-crossing period under two operating scenarios. The optimum hull is generated and vertical accelerations at some critical points on main deck are compared with the parent ones. Finally a comparative analysis with the results obtained for a similarly sized monohull passenger ship is carried out, in order to quantify, by the OMSI, the relative goodness in terms of wellness onboard of monohulls and catamarans, as a function of sea states and operating scenarios.

• 한국해안해양공학회지
• /
• 제19권4호
• /
• pp.295-302
• /
• 2007

2006년 10월 $23{\sim}24$일 동해안 일대에서 발생한 이상 고파(高波)를 5개 지점에서 관측하고 기상청에서 제공하는 바람 자료를 함께 이용하여 고파의 특성을 분석하였다. 이번 이상 고파는 높은 너울이 동해안에 영향을 미치기 시작하는 시점에 동해상에 발달한 온대성 저기압의 영향으로 동해선풍이 지속적으로 강하게 불어서 발생하였다. 5개 관측 지점 중 가장 북쪽에 위치한 속초에서는 최대 순간풍속 63.7 m/s의 강풍과 최대 유의파고 9.69 m, 첨두주기 12.8 s의 고파가 관측되었다. 이처럼 높은 파가 발생한 이유는 강풍이 부는 동안 높은 너울이 지속적으로 유지되었고 강풍이 너울의 진행과 같은 방향으로 불어서 너울과 풍파의 중첩에 의한 파고 상승 효과가 극대화되었기 때문이다. 동해안에서는 겨울철에 이러한 돌발성 폭풍파가 발생할 가능성이 매우 높으므로 이를 고려하여 피해를 최소화하도록 대응 방침을 수립해야 할 것이다.

• Ocean Systems Engineering
• /
• 제11권1호
• /
• pp.83-97
• /
• 2021

The submerged U-shape breakwater interaction with the solitary wave is simulated by the Boussinesq equations using the finite-difference scheme. The wave reflection, transmission, and dissipation (RTD) coefficients are used to investigate the U-shape breakwater's performance for different crest width, Lc1, and indent breakwater height, du. The results show that the submerged breakwater performance for a set of U-shape breakwater with the same cross-section area is related to the length of submerged breakwater crest, Lc1, and the distance between the crests, Lc2 (or the height of du). The breakwater has the maximum performance when the crest length is larger, and at the same time, the distance between them increases. Changing the Lc1 and du of the U-shape breakwaters result in a significant change in the RTD coefficients. Comparison of the U-shape breakwater, having the best performance, with the averaged RTD values shows that the transmission coefficients, Kt, has a better performance of up to 4% in comparison to other breakwaters. Also, the reflection coefficients KR and the diffusion coefficients, Kd shows a better performance of about 30% and 55% on average, respectively. However, the model governing equations are non-dissipative. The non-energy conserving of the transmission and reflection coefficients due to wave and breakwater interaction results in dissipation type contribution. The U-shape breakwater with the best performance is compared with the rectangular breakwater with the same cross-section area to investigate the economic advantages of the U-shape breakwater. The transmission coefficients, Kt, of the U-shape breakwater shows a better performance of 5% higher than the rectangular one. The reflection coefficient, KR, is 60% lower for U-shape in comparison to rectangular one; however, the diffusion coefficients, Kd, of U-shape breakwater is 35% higher than the rectangular breakwater. Therefore, we could say that the U-shape breakwater has a better performance than the rectangular one.

• 한국해양공학회지
• /
• 제25권4호
• /
• pp.1-6
• /
• 2011

The installation of a topside structure can be categorized into the following stages: start, pre-lifting, lifting, lifted, rotating, positioning, lowering, mating, and end of installation. The transfer of the module onto the floating spar hull occurs in the last three stages, from lowering to the end. The coupled multi-body motions are calculated in both calm water and in irregular waves with a significant wave height (1.52m). The effects of the hydrodynamic interactions between the heavy lifting vessel and the spar hull during the lowering and mating stages are considered. The internal forces caused by the load transfer and ballasting are derived for the mating phases. The results of the internal forces for the calm water condition are compared with those in the irregular sea condition. Although the effect of the pitch motion on the relative vertical motion between the deck of the floating structure and the topside module is significant in the mating phases, the internal force induced pitch motion is too small to have this influence. However, the effect of the internal force on the wave-induced heave responses in the mating phases is noticeable in the irregular sea condition because transfer mass-induced draught changes for the floating structure are observed to have higher amplitudes than the external force induced responses. The impacts of the module on the spar hull in the mating phase are investigated.

• 한국해양공학회지
• /
• 제25권4호
• /
• pp.7-11
• /
• 2011

The installation phase for a topside module suggested can be divided into 9 stages, which include start, pre-lifting, lifting, lifted, rotating, positioning, lowering, mating, and end of installation. The transfer of the topside module from a transport barge to a crane vessel takes place in the first three stages, from start to lifting, while the transfer of the module onto a floating spar hull occurs in the last three stages, from lowering to the end. The coupled multi-body motions are calculated in both calm water and in irregular waves with significant wave height (1.52m), with suggested force equilibrium diagrams. The effects of the hydrodynamic interactions between the crane vessel and barge during the lifting stage have been considered. The internal forces caused by the load transfer and ballasting are derived for the lifting phases. The results of these internal forces for the calm water condition are compared with those in the irregular sea condition. Although the effect of pitch motion on the relative vertical motion between the deck of the floating structure and the topside module is significant in the lifting phases, the internal force induced pitch motion is too small to show its influence. However, the effect of the internal force on the wave-induced heave responses in the lifting phases is noticeable in the irregular sea condition because the transfer mass-induced draught changes in the floating structure are observed to have higher amplitudes than the external force induced responses.

• Ocean Systems Engineering
• /
• 제10권1호
• /
• pp.1-23
• /
• 2020

Hydrodynamic Drag of Surface combatants pose significant challenges with regard to fuel efficiency and exhaust emissions. Stern flaps have been used widely as an energy saving device, particularly by the US Navy (Hemanth et al. 2018a, Hemanth Kumar and Vijayakumar 2018b). In the present investigation the effect of flap turning angle on drag reduction is numerically and experimentally studied for a high-speed displacement surface combatant fitted with a stern flap in the Froude number range of 0.17-0.48. Parametric investigations are undertaken for constant chord length & span and varying turning angles of 5° 10° & 15°. Experimental resistance values in towing tank tests were validated with CFD. Investigations revealed that pressure increased as the flow velocity decreased with an increase in flap turning angle which was due to the centrifugal action of the flow caused by the induced concave curvature under the flap. There was no significant change in stern wave height but there was a gradual increase in the stern wave steepness with flap angle. Effective length of the vessel increased by lengthening of transom hollow. In low Froude number regime, flow was not influenced by flap curvature effects and pressure recovery was marginal. In the intermediate and high Froude number regimes pressure recovery increased with the flap turning angle and flow velocity.