• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.12
• /
• pp.1-9
• /
• 1997

The signaling protocol for B-ISDN should support variety of services including point-to-pont single-connection call, point-to-point multi-connection call and point-to-multipoint connection call. an efficient signaling protocol for point-to-point multi-connection call based on ITU-T Recommendation Q.298X is presented in this paper. Sequential establishment of madatory and optional connections and common routing scheme for synchronization, along with separation of information elements for establishement of multi-connection call are included in the proposed signaling protocol. Limited network resources can be used more efficiently by proposed sequential establishement of mandartory and optional connection for point-to-point multi-connection call which can provide multimedia services. And common routing can be provided effectively by proposed common routing scheme for connectios requiring synchronization like as video-phone and video-conference.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11B
• /
• pp.945-952
• /
• 2006

In hierarchical mobile IPv6 networks, when an inter-domain handover occurs, mobile nodes suffer from excessive signaling traffic and long handover latency, resulting in possible disruption of ongoing connections. Further, the selection of MAP and its load status critically affect the overall system performance. Therefore, we propose a dynamic MAP selection scheme that seeks to distribute load among MAPs as well as reduces inter-domain handovers. Performance is evaluated from not only an analytic model of average signaling cost but also simulation. The analytical and simulation results show that our proposed scheme improves load distributedness and reduces inter-domain handovers and signaling cost compared to another existing IETF based approach.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.84-90
• /
• 2011

Handling paging mechanism at the IP layer (i.e., IP paging) makes it possible to support heterogeneous wireless access technologies, providing energy-saving and reduced location registration signaling overhead over IP-based mobile networks. However, IP paging may rather cause adverse effects under active communication environments because of significant paging signaling overhead and frequent paging delay. Therefore, in order to solve these problems, a cost-effective IP paging scheme is proposed in this paper, which enables a mobile node to perform selective registration and paging based on its profile information. Numerical results indicate that the proposed scheme has apparent potential to mitigate considerable paging signaling overhead and frequent paging delay in IP-based hierarchical mobile networks.

• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.215-221
• /
• 2003

It is expected that per-user customized services are widely used in next generation Personal Communication Network. To provide personalized services for each call, per-user service profiles are frequently referenced and signaling traffic is considerably large. Since the service calls are requested from the places where user stays, we can expect that the traffic is localized. In this paper, we propose a new service profile replication scheme, named Follow-Me Replication with local Anchor (FMRA). By replicating user's service profile in a user-specific location area, local anchor of each region, the signaling traffic for call and mobility can be distributed to local network. We compared the performance of the FMRA with two typical schemes: Intelligent Network-based !Central scheme and IMT-2000 based full replication scheme, as we refer it to Follow-Me Replication Unconditional (FMRU). Performance results indicate that FMRA lies between Central and FMRU schemes according to call to mobility ratio, and we identified the efficient ranges of CMR for FMRA depending on the various network parameters.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.65-80
• /
• 2012

Mobile IP is a simple and scalable global mobility solution. However, it may cause excessive signaling traffic and long signaling delay. So MN (Mobile Node) to the home network in order to reduce the number of location update signaling is necessary to reduce the delay. In this paper, the signaling overhead to be distributed evenly on the boundary of the regional network, each MN's dynamic mobility and traffic load is adjusted according to the PMIPv6 (Proxy Mobile IPv6) networks in the proposed dynamic regional mobility management scheme (dMMS). Each user in a distributed network system that offers the least amount of signaling traffic is tailored to the optimized system configuration. Signaling cost function in order to propose a new discrete analytical model is proposed, MN's mobility and packet arrival patterns. Location update and packet delivery costs to calculate the total average, the optimized area to determine the size of the network is proposed. The results of mathematical analysis, the proposed technique dMMS in terms of reducing the cost of the entire signaling were found to be excellent performance.

• Journal of Korea Multimedia Society
• /
• v.15 no.12
• /
• pp.1492-1498
• /
• 2012

One of the major issues in current internet architecture is that it was not designed to support the user mobility. In order to overcome this restriction, in this paper, we propose an identifier/locator separation architecture which contain the overlay mapping system to store the identifier-to-locator mapping record. In addition, we design the mobility management scheme base on Identifier/Locator separation above for Furture Internet architecture. We then devise the analysis model to evaluate the signaling cost of our scheme. By conducting the simulation. we show that our scheme can operate with lower signaling cost than other schemes.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.684-690
• /
• 2008

LRT System Application Project is performed for the purpose of technical advancement and stabilization of K-AGT system from the viewpoint of practical use and commercialization. For those purpose, the performance test and evaluation procedure for signaling system have been developed, including the scheme of verifying the performance and function of signaling system under driverless multiple train operation environment. In this paper, multiple train operation scheme in K-AGT test line is presented. Test schemes for maintaining the safety distance between trains, operation scenario considering shunting and turning of train, and dia operation schemes in test line are reviewed while researching test vehicle features, route condition and running pattern. Additional equipments for testing each scheme are also reviewed.

• The Korean Journal of Financial Studies
• /
• v.2 no.1
• /
• pp.189-214
• /
• 1995

We examine the existence of the investment signaling equilibrium without assuming a specific utility function for the managers of the corporations. We assume the managers have the initial holdings of their own corporations as a form of the executive compensation. Under the different financing schemes to finance the investment, the new equity financing and the risky debt financing, we derive the investment signaling equilibrium and compare the the investment signaling equilibrium under each financing scheme. We show that the investment signaling equilibrium with each financing will obtain with the underinvestment of the high quality firm and that the investment signaling equilibrium with the risky debt financing will dominate the investment signaling equilibrium with the new equity financing.

• Journal of the Korean Society for Railway
• /
• v.6 no.2
• /
• pp.135-141
• /
• 2003

According to the computerization of railway signaling systems, the interface link between these signaling equipment is also replaced by digital communication channel, expecially communication link for interface between EIS and LDTS, but there are some problems in the present state of railway signaling. First of all, different communication protocol is applied to interface between above two signaling equipment although they have same functions. The other is that the communication protocol currently used in railway field has some unreasonable points such as structure, formation of byte, error correction scheme and etc. To solve these problems, the standard communication protocol for railway signaling is designed. The structure of designed communication protocol and the results of performance analyses are represented in this paper. It will be expected the increase of safety, reliability and efficiency of maintenance of signaling system by using of the designed communication protocol for railway signaling.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.61-68
• /
• 2010

In this paper, we investigate the performance of ARQ-aided Time Switched Transmit Diversity (ARQ-TSTD) applying the multi-level control signaling in the WCDMA LCR-TDD system. Proposed ARQ-TSTD system applies the multi-level control signaling scheme in which the receiver sends the response signal (ACK or NACK signal) to the transmitter and defines NACK2 signal for multi-level control. Transmitter utilize the NACK2 control signal to the postponement of transmission and multi-user scheduling scheme proposed by this paper. Simulation results demonstrate that the proposed postponement of transmission and multi-user scheduling scheme yield about 1.3dB, 1.4dB performance gain respectively, compared with the conventional ARQ-TSTD with antenna switching scheme in tenn of the frame error rate (FER) for mobile speed of 3km/h and FER value of 10%. In addition, 14% and 11.5% of throughput gain respectively is shown when Eb/N0=-3dB.