• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.123-127
• /
• 1986

The use of vibration signal for fault detection inside a machine (or its part) is not new, and a number of signal processing techniques are available at the moment. A common problem for all such techniques is the high level of background signals which often made it very difficult to distinguish the desired signals. We developed a new algorithm to detect the minute faults of rotating part based on spectral histogram analysis. The technique has subsequently been applied to the bearings and has proved to be useful.

• 한국소음진동공학회논문집
• /
• 제23권2호
• /
• pp.152-159
• /
• 2013

A structural health monitoring(SHM) technique for locating impact position in a composite plate is presented in this paper. The technique employs a single sensor and spatial focusing properties of time reversal(TR) and inverse filtering(IF). We first examine the focusing effect of back-propagated signal at the impact position and its surroundings through simulation. Impact experiments are then carried out and the localization images are found using the TR and IF signal processing, respectively. Both techniques provide accurate impact location results. Compared to existing techniques for locating impact or acoustic emission source, the proposed methods have the benefits of using a single sensor and not requiring knowledge of material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in the SHM of plate-like structures.

• 한국측량학회지
• /
• 제32권6호
• /
• pp.599-606
• /
• 2014

Since the accuracy of Global Positioning System (GPS)-based vehicle positioning system is significantly degraded or does not work appropriately in the urban canyon, the integration techniques of GPS with Inertial Navigation System (INS) have intensively been developed to improve the continuity and reliability of positioning. However, its accuracy is degraded as INS errors are not properly corrected due to the GPS signal blockage. Recently, the image-based positioning techniques have been started to apply for the vehicle positioning for the advanced in processing techniques as well as the increased the number of cars installing the camera. In this study, Single Photo Resection (SPR), which calculates the camera exterior orientation parameters using the Ground Control Points (GCPs,) has been integrated with the INS/GPS for continuous and stable positioning. The INS/GPS/SPR integration was implemented in both of a loosely and a tightly coupled modes, based on the Extended Kalman Filter (EKF). In order to analyze the performance of INS/SPR integration during the GPS outage, the simulation tests were conducted with a consideration of factors affecting SPR performance. The results demonstrate that the accuracy of INS/SPR integration is depended on magnitudes of the GCP errors and SPR processing intervals. Additionally, the simulation results suggest some required conditions to achieve accurate and continuous positioning, used the INS/SPR integration.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.163-169
• /
• 1997

The simulation of target-scattered echo with the moving sonar platform and target in 3-dimensional ocean environment is essential to validate and evaluate the performance of a sonar system. This paper presents the improved target signal simulation on the basis of the highlight(HL) model and its realtime algorithm. In order to simulate the scattering highlight, the highlight is represented as a directional scatterer. The realtime generation algorithm of the target signal is realized by use of DSP chip, TMS320C40, where the 40 channels are equally separated to form a parallel processing task in 4 processors. The presented realtime-version of target signal simulation can be used as a target signal simulator in the development of ACM(Acoustic Counter Measure) and advanced sonar signal processing techniques.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.925-928
• /
• 2008

현대 사회의 정보처리 기술은 디지털 기술을 기반으로 하여 빠르게 성장하고 있다. 이러한 디지털 처리기술은 신호를-음성 및 영상처리- 전달하고 해석하는 과정에서 다양한 방법을 사용하여 신호를 획득, 저장하고 있다. 효과적인 신호처리를 위해 다양한 필터가 사용되고 있으며 대표적인 디지털 필터로써는 FIR 필터와 IIR 필터가 있다. 디지털 FIR 필터는 IIR 필터에 비해 안정적이며, 선형위상 응답특성을 갖고 있다. 하지만, 디지털 FIR 필터의 불연속 구간에서의 깁스현상이 발생하는 문제점을 가지며 이것을 극복하는 것이 주요한 관건이라 하겠다. 따라서 본 논문에서는 창함수를 이용한 FIR 필터를 제시하였으며, 기존에 사용한 창함수와 비교를 통하여 성능의 우수함을 나타내었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.721-726
• /
• 2008

Community Noise has been great concerned in public. A road traffic noise has affected too much damage on quiet living environment. In this paper, About measured from the measure point noise and the noise signal processing techniques applied to the occurrence of the noise source with a path to reach this measure point to the measured data to determine signal processor for Complex Cepstrum Analysis of how to apply for research.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.868-871
• /
• 2002

Nowadays, zerotrees based digital watermarking techniques are considered to be an efficient watermarking technique used for multimedia data in a compressed form. This paper presents a technique for watermarking an image, by employing zerotrees derived from the wavelet packet coefficients of the transformed image to carry the watermark signal. By setting a proper threshold in zerotrees determining process, the watermark signal can be recovered without the need of original image. With our proposed technique, more amount of watermark signal can be embedded within the image, compared to ordinary wavelet transform based techniques. The experimental results show the improved performance in both qualities of the resultant watermarked image and robustness of the embedded watermark signal against common signal processing such as brightness/contrast enhancement, high-pass filtering, Gaussian noise adding and JPEG compression scheme

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.381-384
• /
• 2002

In speech signal processing, it Is very important to detect the pitch exactly in speech recognition, synthesis and analysis. but, it is very difficult to pitch detection from speech signal because of formant and transition amplitude affect. therefore, in this paper, we proposed a pitch detection using the spectrum flattening techniques. Spectrum flattening is to eliminate the formant and transition amplitude affect. In time domain, positive center clipping is process in order to emphasize pitch period with a glottal component of removed vocal tract characteristic. And rough formant envelope is computed through peak-fitting spectrum of original speech signal in frequency domain. As a results, well get the flattened harmonics waveform with the algebra difference between spectrum of original speech signal and smoothed formant envelope. After all, we obtain residual signal which is removed vocal tract element The performance was compared with LPC and Cepstrum, ACF 0wing to this algorithm, we have obtained the pitch information improved the accuracy of pitch detection and gross error rate is reduced in voice speech region and in transition region of changing the phoneme.

• ETRI Journal
• /
• 제17권4호
• /
• pp.25-35
• /
• 1996

This paper derives the symbol error probability for quadrature amplitude modulation(QAM) with L-fold space diversity in Rayleigh fading channels. Two combining techniques, maximal ratio combining(MRC) and selection combining(SC), are considered. The formula for MRC space diversity is obtained by averaging the symbol error probability of M-ary QAM in an additive white Gaussian noise(AWGN) channel over a chi-square distribution with 2L degrees of freedom. The obtained formula overcomes the limitations of the earlier work, which has been limited only to deriving the symbol error rate(SER) of QAM with two branch MRC space diversity. The formula for SC space diversity is obtained by averaging the symbol error probability of M-ary QAM in an AWGN channel over the distribution of the maximum signal-to noise ratio among all of the diversity channels for SC space diversity has been reported yet. Analytical results show that the probability of error decreases with the order of diversity gain per additional branch decreases as the number of branches becomes larger. On the other hand, the performance of 16 QAM with MRC becomes much better than that of SC as the number of branches becomes larger. By giving the order of diversity, L, and the number of signal points, M, we have been able to obtain the SER performance of QAM with general space diversity. These results can be used to determine the order of diversity to achieve the desired SER in land mobile communication system employing QAM modulation.

• Structural Engineering and Mechanics
• /
• 제71권1호
• /
• pp.57-63
• /
• 2019

During the last two decades, much joint research regarding vibration based methods has been done, leading to developing various algorithms and techniques. These algorithms and techniques can be divided into modal methods and signal methods. Although modal methods have been widely used for health monitoring and damage detection, signal methods due to higher efficiency have received considerable attention in various fields, including aerospace, mechanical and civil engineering. Signal-based methods are derived directly from the recorded responses through signal processing algorithms to detect damage. According to different signal processing techniques, signal-based methods can be divided into three categories including time domain methods, frequency domain methods, and time-frequency domain methods. The frequency domain methods are well-known and interest in using them has increased in recent years. To determine dynamic behaviours, to identify systems and to detect damages of bridges, different methods and algorithms have been proposed by researchers. In this study, a new algorithm to detect seismic damage in the bridge's piers is suggested. To evaluate the algorithm, an analytical model of a bridge with simple spans is used. Based on the algorithm, before and after damage, the bridge is excited by a sine force, and the piers' responses are measured. The dynamic specifications of the bridge are extracted by Power Spectral Density function. In addition, the Least Square Method is used to detect damage in the bridge's piers. The results indicate that the proposed algorithm can identify the seismic damage effectively. The algorithm is output-only method and measuring the excitation force is not needed. Moreover, the proposed approach does not need numerical models.