• Journal of Korean Neurosurgical Society
• /
• 제61권4호
• /
• pp.434-440
• /
• 2018

Objective : The purpose of this study was to find an optimal delivery route for clinical trials of intrathecal cell therapy for spinal cord injury in preclinical stage. Methods : We compared in vivo distribution of Cy5.5 fluorescent dye in the spinal cord region at various time points utilizing in vivo optical imaging techniques, which was injected into the lateral ventricle (LV) or cisterna magna (CM) of rats. Results : Although CM locates nearer to the spinal cord than the LV, significantly higher signal of Cy5.5 was detected in the thoracic and lumbar spinal cord region at all time points tested when Cy5.5 was injected into the LV. In the LV injection Cy5.5 signal in the thoracic and lumbar spinal cord was observed within 12 hours after injection, which was maintained until 72 hours after injection. In contrast, Cy5.5 signal was concentrated at the injection site in the CM injection at all time points. Conclusion : These data suggested that the LV might be suitable for preclinical injection route of therapeutics targeting the spinal cord to test their treatment efficacy and biosafety for spinal cord diseases in small animal models.

• 한국해양공학회지
• /
• 제13권3B호
• /
• pp.38-46
• /
• 1999

Increasing stringent emissions legislation and requirement of more effective energy used for diesel engine demand the fine control of the fuel injection system. Recently, the electromagnetic fuel injection control system for diesel engine is tried to realize the optimum diesel combustion by the feel back sensing as optical signal of combustion flame. The photo detectors were made for the feed back signal of electromagnetic fuel injection control for small DI diesel engine. Their abilities to detect defining combustion events were examined. By evaluating test results, it was shown that the wider acceptable optical range design of optical probe window face, and selection of installation position and installation method of detector were important point for improving sensing ability. The detector was shown to detect start and end of diffused combustion and maximum point of flame intensity impossible for pressure sensor, and also shown that the maximum point of flame intensity was 75% of accumulated heat release point within the experimental conditions.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.81-85
• /
• 2006

In this study, we have been examined nano Injection Molding process which can improve transcription of 100nm-level pattern. We changed the various parameter (temperature of injection mold, clamp force, temperature of nozzle) which can be influence for improving transcription. And we measured and analyzed shapes of 100nm-level pattern by Automic Force Microscope for proving transcription. We made the Blu-ray Disc sample for proving transcription. And we measured HF-Signal and jitter. As a result, when the temperature of mold is more than $120^{\circ}C$ and the clamp force is more than 10 ton, We reached over 95 percent of transcription compared with stamper pattern. And we reached in-spec. value for HF-Signal and Jitter. Then we reached over 95 percent of transcription compared with stamper pattern.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.134-144
• /
• 1995

The solenoid actuated hydrogen injector and the capacitive peak-hold type driving circuit were designed and made, and the hydrogen supply system for in-cylinder injection was constructed with these. The performance of the injector was investigated through measuring the pintle lift profiles and the injection quantities, and the performance of the hydrogen supply system was confirmed through the experiments at the single cylinder engine. The injection quantity increased linearly as the duration of driving signal increased. At the single cylinder engine, the hydrogen injector was operated stably. The hydrogen flow rate of the injector with the peak-hold type driving circuit could be controlled precisely at high engine speed or low load condition only with the variation of signal duration.

• 한국통신학회논문지
• /
• 제22권8호
• /
• pp.1622-1631
• /
• 1997

A 3-stages Active Microstrip Phased Array Antenn(AMPAA) is implemented using Injection-Locking Coupled Oscillators(ILCO). The AMPAA is a beam scanning active antenna with capability of electrical scanning by frequency varation of ILCO. The synchronization of resonance frequencies in array elements is occured by ILCO, and the ILCO amplifies the injection signal and functions as a phase shifter. The microstrip ptch is operated as a radiation element. The unilateral amplifier is a mutual coupling element of AMPAA, eliminates the reverse locking signal and controls the locking bandwidth of ILCO. The possibility of Monolithic Microwave Integrated Circuits(MMIC) of T/R module is proposed by simplified and integrated fabrication process of AMPAA. The 0.75.$lambda_{0}$ is fixed for a mutual coupling space to wide the scanning angle and minimize the multi-mode. The AMPAA has beam scanning angle of 31.4.deg., HPBW(Half Power Beam Widths) of 26.deg., directive gain of 13.64dB and side lobe of -16.5dB were measured, respectively.

• Investigative Magnetic Resonance Imaging
• /
• 제6권2호
• /
• pp.158-165
• /
• 2002

목적: 체내에 주입된 Gd-DTPA가 뇌의 확산강조 자기공명영상 신호강도 및 현성확산계수에 미치는 영향을 알아보았다. 대상 및 방법 : 성숙한 잡견 5마리에 대하여 동맥내 도관삽입에 의한 좌측 내경동맥 색전방법을 이용하여 초급성 뇌경색 동물모델을 만들었다. 색전 후 1시간째 확산강조영상을 시행하고, Gd-DTPA를 주입한 다음 다시 90분까지 11회의 추가 확산강조영상을 얻었다. 관심영역을 설정하여 측정한 초급성 뇌경색부위와 반대측 정상부위의 확산강조영상 신호강도 및 현성확산계수를 분석하였다. 결과: 뇌경색은 색전 후 1시간에 시행한 확산강조 자기공명영상에서 잡견 5마리 모두에서 발견되었다. 확산강조영상에서 초급성 뇌경색부위의 신호강도는 Gd-DTPA 주입 여부와 관계없이 시간이 경과함에 따라 증가하였으나, 관류가 유지된 정상부위의 신호강 도는 Gd-DTPA 주입 후 2분에 시행한 첫 검사에서 오히려 저하된 후, 시간경과에 따라 다시 증가하였다. 현성확산계수는 초급성 뇌경색부위에서 Gd-DTPA주입여부에 관계없이 시간 이 경과함에 따라 지속적으로 감소되었으나, 관류가 유지된 반대측 정상부위에서는 변화하지 않았다. 결론: 체내에 주입된 Gd-DTPA는 초급성 뇌경색부위 및 정상부위의 현성확산계수에 영향을 미치지 않으나, 정상부위에서는 조영제 주입 직후 초기의 자화율효과에 의해 확산강조영상의 신호 강도를 저하시켰다. 조영제 주입 후 시행한 확산강조영상 신호 강도의 정량적인 측정이 필요한 연구 혹은 임상 증례에 대하여는 현성확산계수를 측정함으로써 Gd-DTPA의 자화율효과에 의한 영향을 배제하여야 할 것이다.

• 한국전자파학회논문지
• /
• 제10권5호
• /
• pp.653-662
• /
• 1999

본 논문에서는 부고조파를 이용한 주입 동기 발진기를 설계, 제작하였다. 발진기는 Two Signal Method ( (TSM)의 방법을 사용하여 직렬 궤환회로로 설계하였다. 발진기의 발진주파수 9.4 GHz에서 출력전력 6dBm으 로 free-running하고 었고, 입력선호가 들어가연 주파수가 체배되어 locking되었다. 이때 원하는 출력 파형의 크 기는 다른 부고조파 신호에 비해 최소 40dB 이상이며, 2차 부고조파를 이용한 경우 locking range는 최대 220 MHz 정도이고,4차 부고조파를 이용한 경우 10 MHz이었다 이때의 위상잡음은 각각 100 KHz offset에서 -111dBe/Hz, - 104 dBelHz 정도의 특성을 나타내었다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권5호
• /
• pp.338-344
• /
• 2000

This paper proposes a field-oriented control strategy without speed sensor in overall speed range. At low speed region including zero speed, the electrical saliency which is due to the main flux saturation is used in order to estimate an instantaneous flux position. This electrical saliency can be obtained from the difference of high frequency impedance by the high frequency signal injection. This method enables the stable operation at zero speed or stator frequency even under heavily loaded condition. However, because of the high frequency signal injection the loss and noise in motor increase and the voltage margin is reduced as the motor speed increases. Therefore, this algorithm must be supplemented with the algorithm based on the electrical model of motor, which is conventionally used in the region except the low speed. This paper proposes the combination algorithm between the high frequency signal infection method and the adaptive observer, in which the rotor flux and motor speed can be simultaneously estimated by the adaptive control theory. This combination algorithm enables the stable operation of field-oriented speed control without speed sensor in overall speed range. This is verified by experimental results.

• 대한전자공학회논문지TC
• /
• 제47권8호
• /
• pp.99-107
• /
• 2010

ATSC (Advanced Television Systems Committee) 방식의 지상파 디지털 TV 방송 시스템은 단일주파수망을 구성하기 위하여 송신기들 및 중계기들이 단일 주파수를 사용할 경우 수신기에서 다중 송신기 및 중계기 신호들이 수신되어 간섭을 초래할 수 있다. 이러한 간섭 문제를 해소하고자 ATSC 기술권고 (recommended practice)에서는 RF 워터마크 (watermark) 방식의 고유한 송신기 식별 코드 (transmitter identification: TxID)를 각 송신기 및 중계기에 할당한 후 이를 송신 및 중계 신호에 부가하여 전송하고 TxID 신호분석기를 통하여 각 송신기 및 중계기에서 송출된 신호가 겪는 채널 환경을 검출하여 송신기와 중계기의 송출전력 및 상대적인 송출시간을 조정함으로써 간섭 문제를 해결하도록 하고 있다. 본 논문에서는 가산 백색 가우시안 잡음 (additive white Gaussian noise: AWGN) 및 다중경로 채널 하에서 TxID 신호가 부가된 지상파 디지털 TV 방송신호의 역호환성을 분석한다. 전산 실험 및 실험실 테스트, 그리고 필드 테스트를 통하여 상용 디지털 TV 수신기의 threshold of visibility (TOV) 증가량은 AWGN 채널에 비해 다중경로 채널환경에서 더 높게 나타났으나 TxID 신호가 기존 디지털 TV 신호에 비해 30 dB 낮게 부가되어 전송될 경우 상용 디지털 TV 수신기의 평균 TOV 증가량은 0.2 dB 이하로 관찰되었다. 이러한 실험 및 테스트 결과는 RF 워터마크 방식의 TxID 신호가 상용 디지털 TV 수신기에 거의 영향을 주지 않음을 보여준다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.24-24
• /
• 2000

This paper proposes a design method of sliding mode observer for SISO linear systems with a disturbance input. We first construct an observer with a constant gain matrix, a feedforward injection map and an external feedforward compensation signal input. Using the second Lyapunov method, we present a sufficient condition for the existence of sliding mode observer. The proposed observer guarantees that the state error trajectories enter a certain region in finite time and remain inside thereafter.