• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.4
• /
• pp.324-331
• /
• 2014

The sensor configuration of the magnetostrictive guided wave system can be described as a single continuous transducing element which makes it difficult to separate the individual modes from the reflected signal. In this work we develop the mode decomposition technique employing chirplet transform based on the maximum likelihood estimation, which is able to separate the individual modes from dispersive and multimodal waveform measured with the magnetostrictive sensor, and estimate the time-frequency centers and individual energies of the reflection, which would be used to locate and characterize defects. Simulation results on a carbon steel pipe are presented, which show the accurate mode separation and more discernible time-frequency representation could become enabled using the proposed technique.

• Wind and Structures
• /
• v.17 no.2
• /
• pp.135-162
• /
• 2013

The majority of experiments to characterize the turbulence in the surface layer have been performed in flat, open expanses. In order to characterize the turbulence in built-up terrain, two mobile towers were deployed during Hurricane Ike (2008) in close proximity, but downwind of different terrain conditions: suburban and open. Due to the significant non-stationarity of the data primarily caused by changes in wind direction, empirical mode decomposition was employed to de-trend the signal. Analysis of the data showed that the along-wind mean turbulence intensity of the suburban terrain was 37% higher than that of the open terrain. For the mean vertical turbulence intensity, the increase for the suburban terrain was as high as 74%, which may have important implications in structural engineering. The gust factor of the suburban terrain was also 16% higher than that of the open terrain. Compared to non-hurricane spectral models, the obtained spectra showed significantly higher energy in low frequencies especially for the open terrain.

• Journal of Biomedical Engineering Research
• /
• v.8 no.2
• /
• pp.171-176
• /
• 1987

Wiener filtering method was applied to the dual energy imaging procedure in digital radiography(D.R.). A linear scanning photodiode arrays with 1024 elements(0.6mm H 1.3mm pixel size) were used to obtain chest images in 0.7 sec. For high energy image acquisition, X-ray tube was set at 140KVp, 100mA with a rare-earth phosphor screen. Low energy image was obtained with X-ray tube setting at 70KVp, 150mA. These measured dual energy images are represented in the vector matrix notation as a linear discrete model including the additive random noise. Then, the object images are restored in the minimum mean square error sense using Wiener filtering method in the transformed domain. These restored high and low energy images are used for computation of the basis image decomposition. Then the basis images are linearly combined to produce bone or tissue selective images. Using this process, we could improve the signal to noise ratio characteristics in the material selective images.

• Journal of the Korean Magnetic Resonance Society
• /
• v.6 no.1
• /
• pp.12-19
• /
• 2002

A shift-averaged Haar wavelet transform was introduced as a new and excellent tool to distinguish real peaks from the noise contaminated NMR signals. It is based on Haar wavelet transform and translation-invariant denoising process. Donoho＇s universal threshold was newly introduced to the shift-averaged Haar wavelet transform for the purpose of automated noise suppression, and was quantitatively compared with the conventional uniform threshold method in terms or threshold and signal to noise ratio (SNR). New algorithm was combined with a routine to suppress a large solvent peak by singular value decomposition (SVD). Combined algorithm was applied to the real spectrum that containing large solvent peak.

• International Journal of Contents
• /
• v.12 no.3
• /
• pp.22-28
• /
• 2016

Tensor with missing or incomplete values is a ubiquitous problem in various fields such as biomedical signal processing, image processing, and social network analysis. In this paper, we considered how to reconstruct a dataset with missing values by using tensor form which is called tensor completion process. We applied Tucker factorization to solve tensor completion which was built base on optimization problem. We formulated the optimization objective function using components of Tucker model after decomposing. The weighted least square matric contained only known values of the tensor with low rank in its modes. A first order optimization method, namely Nonlinear Conjugated Gradient, was applied to solve the optimization problem. We demonstrated the effectiveness of the proposed method in EEG signals with about 70% missing entries compared to other algorithms. The relative error was proposed to compare the difference between original tensor and the process output.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1832-1833
• /
• 2006

This paper presents a design method of the wavelet neural network(WNN) controller based on a direct adaptive control scheme for the intelligent control of Autonomous Underwater Vehicle(AUV) steering systems. The neural network is constructed by the wavelet orthogonal decomposition to form a wavelet neural network that can overcome nonlinearities and uncertainty. In our control method, the control signals are directly obtained by minimizing the difference between the reference track and original signal of AUV model that is controlled through a wavelet neural network. The control process is a dynamic on-line process that uses the wavelet neural network trained by gradient-descent method. Through computer simulations, we demonstrate the effectiveness of the proposed control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2521-2525
• /
• 2005

In this paper, we presented a predictive control technique, which is based on wavelet neural network (WNN), for the control of chaotic systems whose precise mathematical models are not available. The WNN is motivated by both the multilayer feedforward neural network definition and wavelet decomposition. The wavelet theory improves the convergence of neural network. In order to design predictive controller effectively, the WNN is used as the predictor whose parameters are tuned by error between the output of actual plant and the output of WNN. Also the training method for the finding a good WNN model is the Extended Kalman algorithm which updates network parameters to converge to the reference signal during a few iterations. The benefit of EKF training method is that the WNN model can have better accuracy for the unknown plant. Finally, through computer simulations, we confirmed the performance of the proposed control method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.98-105
• /
• 1989

To characterize the biological tissue, the new method to measure the ultrasonic velocity is presented in this paper. The influence of the dispersion effect on the estimation of the ultrasonic velocity is mostly neglected. A more efficient method determining the minimum phase spectrum is developed to characterize the frequency dispersion form the spectral magnitude function. To eliminate the frequency dispersion, the signal-decomposition method is also proposed. Computer simulations are performed to verify the algorithms.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.346-349
• /
• 1993

A method for image compression based on decomposition is presented. We design the efficient coding technique for upper band image signals. This coding technique with directive 1-D DPCM is based on the statistical properties of upper bands. Lower band image signals is encoded using 2-D DPCM. The directive 1-D DPCM is performed, scanning upper bands according to edge direction. And then the predicted error signals of upper band sis coded using B1 and Huffman code, and the predicted error signals of lower band is coded using Huffman code. The proposed system shows improved performance when compared with other existing methods with respect to peak signal to noise ratio(PSMR) and human visual system(HVS) properties.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.510-517
• /
• 2016

Recent developments in the field of separation of mixed signals into music/voice components have attracted the attention of many researchers. Recently, iterative kernel back-fitting, also known as kernel additive modeling, was proposed to achieve good results for music/voice separation. To obtain minimum mean square error (MMSE) estimates of short-time Fourier transforms of sources, generalized spatial Wiener filtering (GW) is typically used. In this paper, we propose an advanced music/voice separation method that utilizes a generalized weighted ${\beta}$-order MMSE estimation (WbE) based on iterative kernel back-fitting (KBF). In the proposed method, WbE is used for the step of mixed music signal separation, while KBF permits kernel spectrogram model fitting at each iteration. Experimental results show that the proposed method achieves better separation performance than GW and existing Bayesian estimators.