• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.3
• /
• pp.275-282
• /
• 2009

Generally, the sinusoidal cavity dither is adopted to ring laser gyroscope for eliminating the lock-in which is non-linear effect at the small rotation input. Despite this method, there are some remained errors which are generated at the dither turnaround, and those errors produce random walk which is a general character of a ring laser gyroscope. As one of the numerous research results for compensating these errors, there is a special lock-in compensation method which is the method of error estimation and compensation by comparing the beat signal periods of before and after the dither turnarounds. In this paper, by ring laser gyroscope modeling and numerical analysis, we verified the theoretical validity and confirmed the effectiveness of this method in expectation of the possible beat signal measurement time resolution. As a result, we confirmed the random walk decreases from a-half to a-third by this lock-in compensation method. So, it is expected to be a remarkable method for reducing the INS alignment time.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.2
• /
• pp.67-73
• /
• 2005

Recently, the social requirement of personal identification techniques has been increasing. Fingerprint recognition is one of the biometries methods that has been widely used for this requirement. This paper proposes the fingerprint matching algorithm that uses the information of the ridge shapes of minutiae. In which, the data of the ridge shape are expressed in one-dimensional discrete-time signals. In our algorithm, we obtain one-dimensional discrete-time signals for ridge at every minutiae from input and registered fingerprints, and find pairs of minutia which have the similar ridge shape by comparing input fingerprint with registered fingerprint, thereafter we find candidates of rotation angle and moving displacement from the pairs of similar minutia, and obtain the final rotation angle and moving displacement value from those candidates set by using clustering method. After that, we align an input fingerprint by using obtained data, and calculate the matching rate by counting the number of corresponded pairs of minutia within the overlapped area of an input and registered fingerprints. As a result of experiment, false rejection rate(FRR) of $18.0\%$ at false acceptance rate(FAR) of $0.79\%$ is achieved.

• Fisheries and Aquatic Sciences
• /
• v.6 no.4
• /
• pp.180-186
• /
• 2003

The full-length cDNA encoding the pre-protein growth hormone (sfGH) from spotted flounder (Verasper variegatus) was amplified by the rapid amplification of cDNA ends (RACE) using degenerated oligonucleotide primers derived from conserved growth hormone sequences. It consists of 901 nucleotides in length, including the coding region of 609 nucleotides, 111 nucleotides of a 5' untranslated region, and 181 nucleotides of a 3' untranslated region. The conserved polyadenylation signal (AATAAA) lies 12 bases upstream from the poly (A) tail. The deduced amino acid sequence shows an open reading frame encoding a pre-protein of 203 amino acids and a putative signal peptide of 17 amino acids, suggesting that the mature hormone consists of 186 amino acids. The analyses of sfGH reveal some unique structural features. The repetitive sequences are located in the 5' untranslated region of sfGH cDNA and consist of tandem arrays of imperfect direct repeat monomers. Moreover, sfGH contains six Cys residues, as opposed to four or five in other GHs, and it is clearly distinguishable from olive flounder (Paralichthys olivaceus) GH, which lacks a region corresponding to residues 175-188 in alignment positions. It has important implications from an evolutionary standpoint, suggesting possible divergence among flatfishes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.97-105
• /
• 2015

This paper discusses the implementation of Bruun's FFT on a SIMD processor. FFT is an algorithm used in digital signal processing area and its effective processing is important in the enhancement of signal processing performance. Bruun's FFT algorithm is one of fast Fourier transform algorithms based on recursive factorization. Compared to popular Cooley-Tukey algorithm, it is advantageous in computations because most of its operations are based on real number multiplications instead of complex ones. However it shows more complicated data alignment patterns and requires a larger memory for storing coefficient data in its implementation on a SIMD processor. According to our experiment result, in the processing of the FFT with 1024 complex input data on a SIMD processor, The Bruun's algorithm shows approximately 1.2 times higher throughput but uses approximately 4 times more memory (20 Kbyte) than the Cooley-Tukey algorithm. Therefore, in the case with loose constraints on silicon area, the Bruun's algorithm is proper for the processing of FFT on a SIMD processor.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.583-590
• /
• 2004

The autofocus is one of the important processes in the automated vision inspection or measurements using optical microscopes, because it influences the measuring accuracy. In this paper, we used the confocal microscope configuration based on not a pinhole but a single-mode optical fiber. A single mode fiber has the functions of source and detector by applying the reciprocal scheme. As a result, we acquired a simple system configuration and easy alignment of the optical axis. Also, we embodied a fast autofocus system by acquiring the focus error signal through a source modulation technique. The source modulation technique can effectively reduce physical disturbances compared with objective lens modulation, and it is easily applicable to general optical microscopes. The focus error signal was measured with respect to the modulation amplitude, reflectance of the specimen and inclination angle of the measuring surface. The performance of the proposed autofocus system was verified through autofocusing flat mirror surface. In addition, we confirmed that source modulation rarely degrades the depth resolution by the comparison between the FWHMs of axial response curves.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.170-175
• /
• 2009

In this paper, we propose real time automatic speaker verification (ASV) system to protect personal information on personal digital assistant (PDA) device. Recently, the capacity of PDA has extended and been popular, especially for mobile environment such as mobile commerce (M-commerce). However, there still exist lots of difficulties for practical application of ASV utility to PDA device because it requires too much computational complexity. To solve this problem, we apply the method to relieve the computational burden by performing the preprocessing such as spectral subtraction and speech detection during the speech utterance. Also by applying the hidden Markov model (HMM) optimal state alignment and the sequential probability ratio test (SPRT), we can get much faster processing results. The whole system implementation is simple and compact enough to fit well with PDA device's limited memory and low CPU speed.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.7
• /
• pp.667-674
• /
• 2011

The gene for esterase (rEst1) was isolated from a new species of genus Rheinheimera by functional screening of E. coli cells transformed with the pSMART/HaeIII genomic library. E. coli cells harboring the esterase gene insert could grow and produce clear halo zones on tributyrin agar. The rEst1 ORF consisted of 1,029 bp, corresponding to 342 amino acid residues with a molecular mass of 37 kDa. The signal P program 3.0 revealed the presence of a signal peptide of 25 amino acids. Esterase activity, however, was associated with a homotrimeric form of molecular mass 95 kDa and not with the monomeric form. The deduced amino acid sequence showed only 54% sequence identity with the closest lipase from Cellvibrio japonicus strain Ueda 107. Conserved domain search and multiple sequence alignment revealed the presence of an esterase/ lipase conserved domain consisting of a GXSXG motif, HGGG motif (oxyanion hole) and HGF motif, typical of the class IV hormone sensitive lipase family. On the basis of the sequence comparison with known esterases/ lipases, REst1 represents a new esterase belonging to the class IV family. The purified enzyme worked optimally at $50^{\circ}C$ and pH 8, utilized pNP esters of short chain lengths, and showed best catalytic activity with p-nitrophenyl butyrate ($C_4$), indicating that it was an esterase. The enzyme was completely inhibited by PMSF and DEPC and showed moderate organotolerance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.271-271
• /
• 2019

Estimating ship motion is difficult because it take place in complex environments.. Estimating ship motion is an important factor in ensuring the safety of ship, so accurate estimates are needed. Existing motion-related studies compare the apparent motion of the model acquired and the reference model by experimenting with the ship motion on a particular alignment, making it difficult to intuitively estimate the hull motion. This study introduces the concept of estimating the characteristics of ship motion as a transfer function through pole-zero interpretation and frequency response analysis by applying the method of transfer function of Linear-Time Invariant system. Ship motion analysis model using Linear-Time Invariant system is consist with 1) wave as input signal 2) ship motion as output signal 3) hull defined as black box. This model can be defined by numericalizing the ship motion as a transfer function and is expected to facilitate the characterization of the ship motion through pole-zero analysis and frequency response analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.494-500
• /
• 2010

In this paper, we newly propose a wireless optical identification system and carried out experiments. A wireless optical identification system consists of a reader and a transponder. The configuration of a reader is the same as that of a transponder, which uses LED light as transmission media and detects the signal light with a solar cell. Optical alignment with a lens is not required because the absorption area of a solar cell is wide and flat, and it is very easy to attach a solar cell on the surface of an object. As the light wavelength does not interfere with radio frequency, a wireless optical identification system shows stable operation. In experiments, we realized a wireless optical identification system that automatically identifies the transponder data at a distance of 1 m using solar cells.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.8
• /
• pp.961-968
• /
• 1999

In this paper we handle a system that transform sensor data to sensor information. Sensor informations from redundant accelerometers are manipulated to represent the configuration of objects carrying sensors. Basic sensor unit of the proposed systme is composed of 3 accelerometers that are aligned along x-y-z coordination axes of motion. To refine the sensor information, at first the sensor data are fused by geometrical optimization to reduce the variance of sensor information. To overcome the error caused from inexact alignment of each sensor to the coordination system, we propose a calibration technique that identifies the transformation between the coordinate axes and real sensor axes. The calibration technique make the sensor information approach real value. Also, we propose a technique that decomposes the accelerometer data into motion acceleration component and gravity acceleration component so that we can get more exact configuration of objects than in the case of raw sensor data. A set of experimental results are given to show the usefulness of the proposed method as well as the experiments in which the proposed techniques are applied to human body motion capture.