• 한국산학기술학회논문지
• /
• 제3권3호
• /
• pp.203-209
• /
• 2002

국내 벤처산업은 정부 주도의 벤처육성정책, 정보·통신 기술의 발달, KOSDAQ시장의 활황 등으로 인하여 급격한 성장을 하였다. 그러나 최근 국내 벤처산업은 정부의 인위적인 정책과 지원으로 인한 압축성장에 따른 많은 폐해에 직면하고 있으며 장기 침체상태로 빠져들 가능성이 있어 보인다. 이것은 국내 벤처산업이 선진국에서 볼 수 있는 벤처캐피탈시장에 바탕을 둔 자생적 성장을 하지 못했기 때문이다. 본 논문은 향후 국내 벤처산업의 지속적인 발전에 관건이 될 벤처캐피탈시장의 현황을 분석하고 개선방안을 모색하였다. 또한 본 논문은 국내 벤처캐피탈시장을 활성화시키기 위한 방안으로 투자조합의 규모 증대 및 해외 벤처캐피탈의 유입 등을 통한 자금조달인의 확대, 지분참여 투자형태로의 자금운용, 코스닥시장의 활성화 등을 제시하였다.

• Journal of Ginseng Research
• /
• 제6권2호
• /
• pp.168-203
• /
• 1982

Effects of soil moisture on growth of Panax ginseng, of various factors on soil moisture, and of moisture on nutrition, quality, physiological disorder, diseases and insect damage were reviewed. Optimum soil moisture was 32% of field capacity with sand during seed dehiscence, and 55-65% for plant growth in the fields. Optimum soil moisture content for growth was higher for aerial part than for root and higher for width than for length. Soil factors for high yield in ginseng fields appeared to be organic matter, silt, clay, agreggation, and porosity that contributed more to water holding capacity than rain fall did, and to drainage. Most practices for field preparation aimed to control soil moisture rather than nutrients and pathogens. Light intensity was a primary factor affecting soil moisture content through evaporation. Straw mulching was best for the increase of soil moisture especially in rear side of bed. Translocation to aerial part was inhibited by water stress in order of Mg, p, Ca, N an Mn while accelerated in order of Fe, Zn and K. Most physiological disorders(leaf yellowing, early leaf fall, papery leaf spot, root reddening, root scab, root cracking, root dormancy) and quality factors were mainly related to water stress. Most critical diseases were due to stress, excess and variation of soil water, and heavy rain fall. The role of water should be studied in multidiciplinary, especially in physiology and pathology.

• 영어영문학
• /
• 제56권1호
• /
• pp.157-178
• /
• 2010

A critique on Freud's remembering taken place in the 80's and 90s has a significant impact on a paradigm shift: from the discursive constructivism to the neo-empiricism. Along with Marx and Nietzsche, Freud was one of the main intellectual sources in formulating the Cultural Studies, known as the political corrections in the later period of Post-modern era. In the wake of feminism, there was a social happening, namely, a memory restoration, when a woman therapist helped a woman patient to restore the past and come up with her father as the cause of her trauma. Finally, 'the false memory syndrome' brought up a hot issue firing on the controversy about Freudian remembering. Freud as a clinical therapist began to be a sole target to be criticized. Strangely enough, however, Freud was continually utilized by such theorists as Julia Kristeva, Homi Bhabah, and Žižek, while having dissenters like Deleuze, Quattari, and Butler. Of those intellectual claims, this paper focuses on the debates by the dissenters not from the discursive theorists but from the clinical studies: Sulloway, Grunbaum, and Crews. My argument directs to the empirical side of Freud for the conclusion that the dispute on him was a seed of a paradigm shift towards the neo-empiricism, after one century's flourishing of constructivism.

• The Korean Journal of Ecology
• /
• 제13권3호
• /
• pp.225-236
• /
• 1990

We studied that seeds of wild radish with different size of weight can be obtained for the purpose of differentiation and growth of these seeds by total growth periods. This study is practised a view of plant eco-physiological side and dry-matter production. Through whole growth periods, we knowthat seed weight of L plots was higher than that of M and S plots. In the 33th day after day after germination, growth values of L, M and S plots were 13.93, 7.77, and 4.61 g/plant, respectively. Growth of shoot (cotyledon and leaf) area and shoot weight were shown the similar trends with individual plant dry-amtter weight. In the 33th day after germination, shoot area of L, M and S plots were 21.55, 11.81 and 8.75 $cm^3$/plant and shoot dry weight of L, M and S plots were 10.83, 6.03, 3.50 g/plant, respectively. In the early stage of growth (the 10-14th day after germination), the values of RGR of seed weight of L, M, S plots were 0.2887, 0.2807 and 0.2365 g/g/day, in the late stage of growth, those values of RGR of L, M, S plote were 0.2721, 0.1716, 0.1727 g/g/day, respectively. In the early stage of growth (the 14th day after germination), the values of NAR or L, M and S plots were 0.1513, 0.1373, and 0.1094 g/$cm^2$/day, respectively. It is thought that seed weights were influenced seriously effect in the early stage of growth. The NAR value, in the late stage of growth (the-28-33th day after germination), of L, M and S plots were not large different as 0.1086, 0.1097 and 0.112 g/$cm^2$/day, respectively. The LAR values of M and S (2.0396, 2.1520 $m^2$/g) plots, in the early stage of growth, were higher than L (1.9037 $m^2$/g) plots. In the late stage of growth, the value of LAR of L plots were nearly same as M plots, but the value of S plots were higher than that of L and M plots (0.0458 $m^2$/g). And, in the early stage of growth, the values of SLA of L, M and S plots were 2.2123, 2.2107 and 2.8448 $m^2$/g, respectively. We measured the photosynthetic rates and the respiratory rates as the physiological characteristics of wild radish. In the early stage of growth, the photosynthetic rates of L, M and S plots were 12.4, 14.4, 9.8 $\mu$mol /$m^2$/sec and 9.4, 11.4, 9.8 $\mu$mol/$m^2$ /sec in the late stage of growth, respectively. In this result, it could be informed that photosynthetic rates in the late stage of growth were lower than the early stage. In the middle stage of growth, the respiratory rates were 0.793, $\mu$mol/$m^2$/min in shoot, and 3.28 $\mu$mol/$m^2$/min in root without relation to seed weight. The growth analysis of plants was used by Hunt & Parson s computer program (1974, 1981) and its results used this program were good. Therefore, in this sense, it could be expected that the computer program used and developed largely in researches of plant growth.

• 한국작물학회지
• /
• 제57권2호
• /
• pp.127-131
• /
• 2012

본 연구는 흑미의 종자 발달에 따른 색소발현 현상을 조사하여 품종육성 및 재배법의 기초자료를 제공하기 위해 최초 어느 시기에 색소가 발현하고, 이러한 색소의 발현순서와 종자 내에서 색깔의 차이가 나타나는 부위에 대해 시험한 결과는 다음과 같다. 최초 색소발현은 개화 후 5일경에 종자의 정단에서 연한적자색을 관찰 하였으며, 이때 색소가 발현된 정도는 종자의 총 단면적 대비 0.08%였다. 색소발현 순서는 종자의 정단에서 기부로, 그리고 배면에서 마지막에는 복면 순이었으며, 색소가 종자 전체에 발현된 시점은 개화 후 25일 경이었다. 그 이후는 색이 적자색에서 흑자색으로 진해지는 시기였다. 수확 후 가시적인 종자 간 및 종자 내 색소발현이 불균일한 것을 골라 조사한 결과, 종자 내 복면부위가 다른 부위에 비해 상대적으로 연한 적자색을 띠었으며, 종자의 색소발현이 불균일한 부위는 복면 부위였다.

• The Korean Journal of Ecology
• /
• 제25권1호
• /
• pp.9-17
• /
• 2002

Human activities greatly affect the environment causing its degradation. Urban development and road networks construction cause main impacts on ecosystems and particularly on vegetation cover: road constructions induce complete degradation of the vegetation cover and often leaves a hare land, sometimes without even a soil cover. Reconstitution of vegetation cover is necessary to limit superficial erosion and land slipping on the road, towards a reintegration of the site in the neighbouring landscape. Many approaches have been studied over the last 30 years aiming at this reconstitution of vegetation cover. At frost, the main purpose of land reclamation was to create a new ecosystem. At this time, the environment created was rather a "garden" with a new soil adapted to the plantation of "decorative" species. Then, in early 90′s many studies on the restoration ecology concept rather focused on adapting the vegetation to the existing conditions on the site, as in a side road embankment for example. Nowadays, we notice a large tendency towards the use of such adapted native species instead of industrially produced seeds. In southern France, our team have led research on the potentials of those local species for their use in revegetation processes with hydro-seeding. We therefore developed an approach combining the use of different types of species: Industrially produced, native and wild cultivated species. This method integrates the benefits of using available low costing seeds that are already used on large scale projects with better adapted species, issued form the cultivation of native species and seed production for their use on smaller scale and more costly but more effective results. The use of wild cultivated species seeds was developed in order to limit the cost and reduce harsh natural seed withdrawal in the natural environment In the case of the use of native species. Besides, the use of such seeds allowed a larger geographical scale of use than with local native seeds. In addition, our team began two years ago a research project in Lebanon aiming at the Introduction and development of the revegetation techniques in Lebanon. In fact, this country bared since 20 years the consequences of urban pressure on its environment especially by the development of quarries and road networks. Therefore, pioneer work is necessary to aim at the adaptation of these techniques to the local environment.

• 마이크로전자및패키징학회지
• /
• 제17권3호
• /
• pp.79-84
• /
• 2010

3차원 Si 칩 패키징 공정을 위한 비아 홀(TSV: Through-Si-Via) 및 Au 시드층 형성, 전기 도금을 이용한 Cu 충전기술과 범핑 공정 단순화에 관하여 연구하였다. 비아 홀 형성을 위하여 $SF_6$ 와 $C_4F_8$ 플라즈마를 교대로 사용하는 DRIE(Deep Reactive Ion Etching) 법을 사용하여 Si 웨이퍼를 에칭하였다. 1.92 ks동안 에칭하여 직경 40 ${\mu}m$, 깊이 80 ${\mu}m$의 비아 홀을 형성하였다. 비아 홀의 옆면에는 열습식 산화법으로 $SiO_2$ 절연층을, 스퍼터링 방법으로 Ti 접합층과 Au 시드층을 형성하였다. 펄스 DC 전기도금법에 의해 비아 홀에 Cu를 충전하였으며, 1000 mA/$dm^2$ 의 정펄스 전류에서 5 s 동안, 190 mA/$dm^2$의 역펄스 조건에서 25 s 동안 인가하는 조건으로 총 57.6 ks 동안 전기도금하였다. Si 다이 상의 Cu plugs 위에 리소그라피 공정 없이 전기도금을 실시하여 Sn 범프를 형성할 수 있었으며, 심각한 결함이 없는 범프를 성공적으로 제조할 수 있었다.

• 한국작물학회지
• /
• 제38권6호
• /
• pp.489-494
• /
• 1993

6개 자식계통 옥수수에 의한 이면교배 조합들 (역교배 포함 30조합)에 대하여 찰옥수수의 식미를 좌우하는 과피두께에 관한 유전분석을 한 결과 다음과 같은 결과를 얻었다. 1. 자식계통 가운데서 옥수수 과피의 두께가 가장 얇았던 것은 제원계통이었다. 2. 교잡종 중에서 과피의 두께가 가장 얇았던 것은 제원을 화분친으로 하여 교배된 교잡종들이었다. 3. 자식계통 가운데 칠보와 당진 계통도 과피가 얇은 편이었는데 이들이 교배된 조합들 역시 과피두께가 않았다. 4. 과피두께가 가장 두터웠던 자식계통은 단양계통이었는데, 이를 양친으로 이용된 교배조합들이 비교적 과피두께가 두터웠다. 5. 옥수수립의 과피두께는 옥수수립의 부위에 따라 차이가 있어 옥수수의 배 부위의 과피가 않았고, 옥수수립의 측면에서는 큰 차이를 찾아 볼수 없었으나 다른 부위보다는 비교적 두꺼웠다. 6. 옥수수립의 상, 하 부위에 따른 과피 두께도 교잡종에 따라 차이가 있었으나 입의 하위부분보다 상위부위의 두께가 좀 더 않았다. 7. 옥수수입의 두께에 미치는 유전적 효과를 보면 일반조합능력의 효과에 의한 영향이 보다 켰고, 특정조합능력의 효과는 분산의 크기에 있어서 일반조합능력의 효과보다 적 었다. 8. 양친 계통의 일반조합능력 효과에 있어서도 제원계통의 효과와 단양계통에 의한 효과가 대조적으로 큰 차이가 있어서 계통효과(line of fects)가 켰음을 확인하였다. 9. 과피두께에 관여하는 유전인자의 효과는 비교적 단순하면서도 과피두께를 얇게 하는 유전인자 효과는 과피를 두껍게 하는 유전인자의 효과보다 우성적으로 작용하는 것으로 추정되었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.140-140
• /
• 2018

The 3D interconnect technologies have been appeared, as the density of Integrated Circuit (IC) devices increases. Through Silicon Via (TSV) process is an important technology in the 3D interconnect technologies. And the process is used to form a vertically electrical connection through silicon dies. This TSV process has some advantages that short length of interconnection, high interconnection density, low electrical resistance, and low power consumption. Because of these advantages, TSVs could improve the device performance higher. The fabrication process of TSV has several steps such as TSV etching, insulator deposition, seed layer deposition, metallization, planarization, and assembly. Among them, TSV metallization (i.e. TSV filling) was core process in the fabrication process of TSV because TSV metallization determines the performance and reliability of the TSV interconnect. TSVs were commonly filled with metals by using the simple electrochemical deposition method. However, since the aspect ratio of TSVs was become a higher, it was easy to occur voids and copper filling of TSVs became more difficult. Using some additives like an accelerator, suppressor and leveler for the void-free filling of TSVs, deposition rate of bottom could be fast whereas deposition of side walls could be inhibited. The suppressor was adsorbed surface of via easily because of its higher molecular weight than the accelerator. However, for high aspect ratio TSV fillers, the growth of the top of via can be accelerated because the suppressor is replaced by an accelerator. The substitution of the accelerator and the suppressor caused the side wall growth and defect generation. The suppressor was used as Single additive electrodeposition of TSV to overcome the constraints. At the electrochemical deposition of high aspect ratio of TSVs, the suppressor as single additive could effectively suppress the growth of the top surface and the void-free bottom-up filling became possible. Generally, copper was used to fill TSVs since its low resistivity could reduce the RC delay of the interconnection. However, because of the large Coefficients of Thermal Expansion (CTE) mismatch between silicon and copper, stress was induced to the silicon around the TSVs at the annealing process. The Keep Out Zone (KOZ), the stressed area in the silicon, could affect carrier mobility and could cause degradation of the device performance. Cobalt can be used as an alternative material because the CTE of cobalt was lower than that of copper. Therefore, using cobalt could reduce KOZ and improve device performance. In this study, high-aspect ratio TSVs were filled with cobalt using the electrochemical deposition. And the filling performance was enhanced by using the suppressor as single additive. Electrochemical analysis explains the effect of suppressor in the cobalt filling bath and the effect of filling behavior at condition such as current type was investigated.

• 한국결정성장학회지
• /
• 제24권2호
• /
• pp.47-53
• /
• 2014

태양전지용 규소에는 단결정, 다결정, mono-like의 세 가지 재료가 사용 중에 있다. 첫 번째로, 단결정은 수율향상의 과제에 집중되고 있으며, 이것은 고액 계면의 형상이 주요 요인으로 알려지고 있다. 이에 대한 연구가 전산모사 등으로 집중되고 있다. 또한 결정과 도가니의 회전 속도가 고액 계면의 형상에 영향을 미치는 것이 확인 되었다. 다결정의 경우에는 결정립계의 역할이 매우 중요하므로 이에 대한 연구가 진행되는데, 이들을 특히 전기적으로 비활성적인 쌍정 입계로 전환하는 연구가 진행되고 있다. 성장 조건을 변경시켜 쌍정 입계로 바꾸어서 재료의 전기적 성질을 향상시키는 결과를 확인하였다. 또한 성장 공정에서 발생될 수 있는 오염을 줄이기 위한 노력은 상부의 Ar 가스의 흐름을 상향 조절하여 불순물의 용입을 줄임이 확인되었다. 다음으로 mono-like인 경우에는 측면으로부터 성장 되어 들어오는 다결정이 단결정의 분율을 저하 시키는 주요 요인이 되고 있다. 이에 대한 해결책으로 하부의 냉각 속도를 높이고 상부와 측면에 단열재를 보강하는 방안이 제시되고 있고, 하부에 놓는 seed의 orientation을 조절하여 측면으로부터 성장 되어 들어오는 다결정을 억제하는 방안이 효과가 있음이 확인 되고 있다.