• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.225-229
• /
• 2003

When hot strip is trimmed in the side trimming process at the entry side of tandem cold rolling mill, due to bad quality of trimming face and burr, product quality(saw ear)becomes so bad that it causes drop of yield and claim from customers. Therefore, it was examined that applying ultrasonic vibration is an effective method to improve quality of strip trimming face and decrease burr magnitude by decreasing shear force acting between strip trimming face and knife in side trimming process of cold rolling.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.425-427
• /
• 2006

In this paper, an automatic side-view inspection algorithm for LCD modules is proposed. Until now, most parts of inspection is performed by human inspectors, which means very high product costs. So inspection automation is the very hot issue in the LCD industries. However, it is not easy problem to replace the human by computer vision system. In the many inspections which are based on the human eyes, side-view inspection is most hard problem to solve. In this paper, an image morphing algorithm is developed, which will help to enable the automation of the side-view inspection process.

• The Journal of Fisheries Business Administration
• /
• v.26 no.2
• /
• pp.93-118
• /
• 1995

The import quantity of the fishing products is very rapidly increasing in the Korea. In the result, the inspection problems are caused to important issues in the fishing products import managements. The major problems of the Korean fishing products inspection are in the system side and structure side. The important improvement schemes are the changement to positive system in the system side, and the unitary in the structure side.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.250-254
• /
• 2002

In this paper, we design an optimized planar array structure with triangular lattice for side-lobe reduction using a genetic algorithm. A constraint optimization is implemented by optimally removing some outer array elements far from the array center. It is shown that only the proper array shape without optimizing the magnitudes and phases of each array antenna can give low side-lobe level with a slight main beam broadening.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.695-701
• /
• 2009

Side Buffer with Anti-Climber is absorber and anti climber during impact. The Overload Protection Device protects the car underframe from being damaged in case of release of the overload protection. In case of heavy impacts(60 ton), the load is converted into deformation energy by plastic deformation of the tear-off bolts This paper describes a study on this function applied for Side Buffer and Overload Protection Device.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.65-67
• /
• 2003

This paper proposes the cost analysis on the energy efficient equipment when this equipment is participated in the demand-side bidding. Conventional demand-side bidding is exercised through load re-distribution. However if this load reduction is exercised by the use of high efficient equipment, its effect will be assumed to be more economical. This paper analyses this cost-benefit effect of high efficient equipment in the demand-side bidding.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.36-37
• /
• 2013

This paper presents high voltage operation sensing boost converter with high side current. Proposed topology has three functions which are high voltage driving, high side current sensing and low voltage boost controller. High voltage gate driving block provides LED dimming function and switch function such as a load switch of LED driver. To protect abnormal fault and burn out of LED bar, it is applied high side current sensing method with high voltage driver. This proposed configuration of boost converter shows the effectiveness capability to LED driver through measurement results.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.53-56
• /
• 2004

In this letter, we propose a novel design scheme for an optimal non-uniform planar array geometry in view of maximum side-lobe reduction. This is implemented by a thinned array using a genetic algorithm. We show that the proposed method can maintain a low side-lobe level without pattern distortion during beam steering.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.405-406
• /
• 2008

In this paper, we will discuss the spectral characteristics of fiber Bragg gratings (FBGs) inscribed in two different types of polarization-maintaining fibers with side holes. One showed high signal-to-noise ratio (SNR), narrow bandwidth and high bending sensitivity, while the other one showed insensitivity to bending due to the small size of the side holes.

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.343-353
• /
• 2002

This study was designed to investigate the stress distribution of alveolar bone in case of on masse retraction with lingual K-loop archwire using the 3-dimensional photoelastic stress analysis followed by stress freezing process. Lingual K-loop archwire which had loop in 15mm height was used and activated by retraction force of 350gm per each side. The results were as follows 1. Central incisor : As the closer side to crown, the larger tensile stress was distributed at both mesial and labial surfaces and the larger compressive stress was distributed at distal surface. As the closer side to root apex, the larger compressive stress was distributed at lingual surface. The compressive stress was distributed at root apex. 2. Lateral incisor : The tensile stress was distributed at the coronal side of mesial surface. The compressive stress was distributed at distal surface. As the closer side to crown, the larger tensile stress was distributed at labial surface. The tensile stress was distributed at coronal side and the compressive stress was distributed at apical side of lingual surface. The compressive stress was distributed at root apex. 3. Canine The tensile stress was distributed at coronal side and the compressive stress was distributed at apical side of mesial surface. The tensile stress was distributed at distal surface. As the closer side to crown, the larger tensile stress was distributed at both mesial and distal surfaces. The compressive stress was distributed at root apex. 4. Second premolar : The tensile stress was distributed at mesial surface. The compressive stress was distributed at coronal side and the tensile stress was distributed at apical side of distal surface. The compressive stress was distributed at coronal side of buccal surface. As the closer side to crown, the larger tensile stress was distributed at lingual surface. The compressive stress was distributed at root apex. 5. First molar . As the closer side to crown, the larger tensile stress was distributed at both mesial and distal surfaces. No stress was distributed at buccal surface and palatal root apex. As the closer side to crown, the larger tensile stress was distributed at both lingual surfaces. The compressive stress was distributed a4 buccal root apexes. 6. Second molar The compressive stress was distributed at all root apexes. As the closer side to crown, the larger compressive stress was distributed at both mesial and lingual surfaces, and the larger tensile stress at both distal and buccal surfaces. Transverse bowing effect was observed in on-masse retraction with lingual K-loop archwire, however vertical towing effect was not. Rather, reverse vortical bowing effect was developed.