• BMB Reports
• /
• v.31 no.3
• /
• pp.264-268
• /
• 1998

Dopamine (DA) acts on swimming motor neurons (SMNs) of Polyorchis penicillatus as an inhibitory neurotransmitter by hyperpolarizing their membrane potentials, which results from the activation of voltagesensitive potassium channels mediated through a $D_2-type$ receptor. In addition, DA, and not the hyperpolarized membrane potential, directly decreased the input resistance of SMNs by ca. 50% from 1.42 to 0.68 $G{\Omega}$. It strongly indicates that DA can shunt other excitatory synaptic signals onto SMNs where DA usually elicited much greater responses in their neurites than soma. All these evidences suggest that DA may operate in this primitive nervous system in dual modes as an inhibitory neurotransmitter and neuromodulator as well.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.385-390
• /
• 2000

In this study we propose the computational model for the coronary circulation. The bypass from left ventricle is also considered. Lumped parameter model with three compartments in the coronary circulation is implemented in this study. We connected the coronary artery compartment with left ventricle to explain the bypass procedure from left ventricle. The asymmetric resistance is assumed in the bypass line from left ventricle. The present numerical method is tested for normal coronary circulation and the results are compared with the existing computational work. The bypass simulation is conducted and the flow pattern is delineated. The effect of shunt resistance and coronary compliance to circulation is investigated for the better design of the bypass shunt.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.7
• /
• pp.327-334
• /
• 2003

We have investigated the quench behavior of the series connection of resistive type superconducting fault current limiter (SFCL) components based on YBCO films. Equal shunt resistors $R_s$ across individual SFCL components successfully produced simultaneous Quenches for 5 components in series, resulting in equal application of voltage to all components. If the two components having the highest and the lowest critical currents ($I_c$) quench safely, others quench altogether The highest shunt resistance is to guarantee the safe quenches of all components, leading to the equal voltage applications within the first half cycle after a fault in the short circuit test. The highest $R_s$ was found to be 28 ［$\Omega$］ for the components in the given quench environment. Considering the safe quenches and protection coordination, the optimal $R_s$ was suggested to be approximately a half of the highest $R_s$,, allowing wide selection of $R_s$ and $I_c$'s. This design provides a practical wav of connecting small SFCL components in series for high voltage application.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.6
• /
• pp.376-380
• /
• 2017

In this paper, we prepared a metal alloy resistor with stable thermal electro motive force (thermal EMF) as well as a low temperature coefficient of resistance (TCR) by adjusting the manganese proportion from 3 to 12 wt% in the Cu-Mn-Ni alloy. Composition of the fabricated metal alloy was investigated using energy dispersive X-ray (EDX) analysis. The TCR of each sample was measured as 44.56, 40.54, 35.60, and 31.56 ppm for Cu-3Mn-2Ni, Cu-5Mn-2Ni, Cu-10Mn-2Ni, and Cu-12Mn-2Ni, respectively. All the resistor samples were available for the F grade (${\pm}1%$ of the allowable error of resistance) high-precision resistor. All the samples satisfied the baseline of high thermal EMF (under 3 mV at $60^{\circ}C$); however, Cu-3Mn-2Ni and Cu-5Mn-2Ni satisfied the baseline of low thermal EMF (under 0.3 mV at $25^{\circ}C$). We were thus able to design and fabricate the metal alloy resistor of Cu-3Mn-2Ni and Cu-5Mn-2Ni to have low TCR and stable thermal EMF at the same time.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.55-60
• /
• 2020

The PERC photovoltaic (PV) modules installed in PV power plant are still reports potential-induced degradation (PID) degradation due to high voltage potential differences. This is because Na+ ions in the cover glass of PV modules go through the encapsulant (EVA) and transferred to the surface of solar cells. As positive charges are accumulated at the ARC (SiOx/SiNx) interface where many defects are distributed, shunt-resistance (Rsh) is reduced. As a result, the leakage current is increased, and decrease in solar cell's power output. In this study, to prevent of this phenomenon, a Moth-eye nanostructure was deposited on the rear surface of an optical film using Nano-Imprint Lithography method, and a solar mini-module was constructed by inserting it between the cover glass and the EVA. To analyze the PID phenomenon, a cell-level PID acceleration test based on IEC 62804-1 standard was conducted. Also analyzed power output (Pmax), efficiency, and shunt resistance through Light I-V and Dark I-V. As a result, conventional solar cells were decreased by 6.3% from the initial efficiency of 19.76%, but the improved solar cells with the Moth-eye nanostructured optical film only decreased 0.6%, thereby preventing the PID phenomenon. As of Moth-eye nanostructured optical film, the transmittance was improved by 4%, and the solar module output was improved by 2.5%.

• Journal of Chest Surgery
• /
• v.38 no.4 s.249
• /
• pp.277-283
• /
• 2005

Arterial oxygen saturation $(SaO_2)$ instability frequently takes place after systemic-pulmonary shunt without shunt occlusion. We analyzed actual incidence and risk factors for $SaO_2$ instability after shunt operations, and possible mechanisms were speculated on. Material and Method: Ninety three patients, who underwent modified Blalock-Taussig shunt from January 1996 to December 2000, were enrolled in this study. Adequacy of shunt was verified in all patients, either by ensuing one ventricle or biventricular repair later on or by appropriate pulmonary artery growth on postoperative angiogram. Age, body weight, hemoglobin level at operation were 3 day to 36 years (median: 1.8 months), 2.5kg to 51kg (median: 4.1kg) and $10.7\~24.3$ gm/dL (median: 15.2 gm/dL) respectively. Preoperative diagnoses were functional single ventricle with pulmonary stenosis or atresia in 39, tetralogy of Fallot in 38 and pulmonary atresia with intact ventricular septum in 16. Pulmonary blood flow (PBF) was maintained pre-operatively by patent ductus or previous shunt in 64 and by forward flow through stenotic right ventricular outflow tract (RVOT) in 29. $SaO_2$ instability was defined as $SaO_2$ less than $50\%$ for more than 1 hour with neither anatomic obstruction of shunt nor respiratory problem. Result: 10 patients $(10.7\%)$ showed $SaO_2$ instability after shunt operation. After shunt occlusion was ruled out by echocardiogram, they received measures to lower pulmonary vascular resistance (PVR), which worked within a few hours in all patients. Risk factors for $SaO_2$ instability included older age at operation (p=0.039), lower preoperative $SaO_2$ (p=0.0001) and emergency operation (p=0.001). PBF through stenotic RVOT showed marginal statistical significance (p=0.065). Conclusion: $SaO_2$ instability occurs frequently after shunt operation, especially in patients with severe hypoxia pre-operatively or unstable clinical condition necessitating emergency operation. Temporary elevation of pulmonary vascular resistance is a possible mechanism in this specific clinical setting.

• Proceedings of the KWS Conference
• /
• 2000.04a
• /
• pp.303-306
• /
• 2000

Quality estimation of the weld has been one of the important issues in RSW which is a main process of the sheep metal fabrication in auto-body industry, It was well known that among the various welding process variables, dynamic resistance has a close relation with nugget formation. With this variable, it is possible to estimate the weld quality in real time. In this study, a new quality estimation algorithm is developed with the primary dynamic resistance measured at welding machine timer. For this, feature recognition method of Hopfield neural network is used. Primary resistance patterns are vectorized and classified with five patterns. The network trained by these patterns recognizes the dynamic resistance pattern and estimates the weld quality Because the process variable monitored at the primary circuit is used, it is possible to apply this system to real time application without any consideration of electrode wear or shunt effect.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.4
• /
• pp.1-6
• /
• 2009

This paper estimates numerically cells the electrical characteristics of the PV module with environmental changes such as shunt resistance, series resistance, temperature, irradiance. Series resistance $R_s$ including diode characteristic resistance $r_d$ is derived from the p-n junction diode model. I-V characteristics of this model with series resistance $R_s$ are simulated on Matlab. Finally, theoretical I-V characteristics are compared with those of solar simulator. Those results agreed well within the manufacturer's maximum error range 3%

• Journal of Microbiology and Biotechnology
• /
• v.33 no.7
• /
• pp.857-863
• /
• 2023

Pathogenic bacteria that colonize the human intestinal tract have evolved strategies to overcome acidic conditions when they pass through the gastrointestinal tract. Amino acid-mediated acid resistance systems are effective survival strategies in a stomach that is full of amino acid substrate. The amino acid antiporter, amino acid decarboxylase, and ClC chloride antiporter are all engaged in these systems, and each one plays a role in protecting against or adapting to the acidic environment. The ClC chloride antiporter, a member of the ClC channel family, eliminates negatively charged intracellular chloride ions to avoid inner membrane hyperpolarization as an electrical shunt of the acid resistance system. In this review, we will discuss the structure and function of the prokaryotic ClC chloride antiporter of amino acid-mediated acid resistance system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.235-236
• /
• 2007

변압기형 전류제한기는 1차측이 선로와 연결되어 있고 2차측은 고온 초전도 소자가 연결되어 있다. 사고 시 고온 초전도 소자의 부담을 줄이고자 2차측에 무유도 션트 저항을 연결하여 특성을 분석하였다. 션트가 없을 때 선로전류 제한율은 좋은나 2차측에 있는 초전도 소자가 부담해야하는 전력은 크다. 션트가 있을 때는 선로전류 제한율은 감소하는 반면 초전도 소자가 부당해야하는 전력은 크게 줄어들었다. 이때 2차측의 전압과 전류 중 전압의 감소 폭이 더 컸으며 션트저항 값이 작을수록 전압의 크기는 더 작아졌다. 결론적으로 션트저항의 연결에 따라 제한율은 낮아지지만 소자가 부담해야하는 전력은 크게 줄어든다.