• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.121-124
• /
• 2006

The arteries are very important in cardiovascular system and easily adapt to varying flow and pressure conditions by enlarging or shrinking to meet the given hemodynamic demands. The blood flow in arteries is dominated by unsteady flow phenomena due to heart beating. In certain circumstances, however, unusual hemodynamic conditions cause an abnormal biological response and often induce circulatory diseases such as atherosclerosis, thrombosis and inflammation. Therefore quantitative analysis of the unsteady pulsatile flow characteristics in the arterial blood vessels plays important roles in diagnosing these circulatory diseases. In order to verify the hemodynamic characteristics, in-vivo measurements of blood flow inside the extraembryonic arterial bifurcation cascade of chicken embryo were carried out using a micro-PIV technique. To analyze the unsteady pulsatile flow temporally, the (low images of RBCs were obtained using a high-speed CMOS camera at 250fps with a spatial resolution of $30{\mu}m\times30{\mu}m$ in the whole blood vessels. In this study, the unusual flow conditions such as flow separation or secondary flow were not observed in the arterial bifurcations. However, the vorticity has large values in the inner side of curvature of vessels. In addition, the mean velocity in the arterial blood vessel was decreased and pulsating frequency obtained by FFT analysis of velocity data extracted in front of the each bifurcation was also decreased as the bifurcation cascaded.

• 신재생에너지
• /
• 제4권2호
• /
• pp.12-20
• /
• 2008

Calculations for the dissolution behavior of liquid CO2 droplets released in the East Sea and the Clipperton Clarion from a moving ship and a fixed pipeline have been carried out in order to estimate the CO2 dissolution characteristics in the ocean. The results show that the injection of liquid CO2 from a moving ship in a high temperature point is an effective method for dissolution. Also, it is noted that the ultimate plume generated from CO2 bubbles repeatsand shrinking due to the peeling from a fixed pipeline, and the presence of hydrate layer on a liquid CO2 droplet acts as a resistant layer in dissolving liquid CO2.

• 한국인공지능학회지
• /
• 제7권1호
• /
• pp.13-16
• /
• 2019

While the Chinese banks have started the impact of foreign banks. At the same time, rising pressure on foreign exchange reserves and appreciation of the renminbi has prompted Chinese banks to go abroad and diversify their risks. The financial crisis of 2008 has caused the continued turbulence of the major financial markets around the world, and the valuation of foreign financial institutions has been drastically shrinking, providing opportunities for Chinese banks to carry out overseas M&A. Based on the overseas M&A status of Chinese commercial banks, this paper sums up the characteristics of the overseas M&A. Then taking a series of overseas M&A conducted by ICBC from 2006 to 2011 as an example, it analyzes the relationship between M&A and performance growth using grey incidence model. The test shows: there is a positive correlation between both overseas M&A and interest rate differential with performance growth of ICBC, and overseas M&A transactions role in promoting the performance growth is significantly higher than the interest rate differential.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.597-601
• /
• 2008

Calculations for the dissolution behavior of liquid $CO_2$ droplets released in the East Sea and the Clipperton Clarion from a moving ship and a fixed pipeline have been carried out in order to estimate the $CO_2$ dissolution characteristics in the ocean. The results show that the injection of liquid $CO_2$ from a moving ship in a high temperature point is an effective method for dissolution. Also, it is noted that the ultimate plume generated from $CO_2$ bubbles repeatsand shrinking due to the peeling from a fixed pipeline, and the presence of hydrate layer on a liquid $CO_2$ droplet acts as a resistant layer in dissolving liquid $CO_2$.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년 추계학술발표대회 논문집
• /
• pp.316-321
• /
• 2008

As people are aging, there are changes about biological psychological sociological. For these reasons, it will arise that changing body size, decreasing power of body, shrinking of living, becoming dull the senses, and feeling alienation loneliness sense of distance about society. Many studies have been done to give residential space supporting older adults' living. Recently many ubiquitous technologies are being development and applied to residential space. The purpose of this study was to classified ubiquitous services by housing supporting concept and older people's physical, psychological and social characteristics and to identify needs for ubiquitous services by older adults. The researches developed a survey instrument and collected the data from 260 people in July to August, 2008 who were more than 40 years old. The results of this study found that residents' current needs and suggested ubiquitous services in future residential environment for older adults.

• Journal of Pharmaceutical Investigation
• /
• 제12권4호
• /
• pp.112-125
• /
• 1982

Sulfamethoxazole particles were microencapsulated using the gelatin-acacia complex coacervation method. Micromeritic properties and dissolution characteristics of the microcapsules were studied. The particle size distribution followed log-normal form. As the hardening time increased, the particle size and wall thickness increased ($45.3-52.0\;{\mu}m$, $2.02-5.12\;{\mu}m$, respectively). This is considered to be due to the cross-linked wall structure of formalized microcapsules which prevents shrinking of gelatin during the dehydration and drying processes. An increase of hardening time clearly delayed the release rate. The in vitro 50% dissolution time $(t_{50})$ for unencapsulated sulfamethoxazole powder was less than 3 min.; for microcapsules hardened for 30 min, the $t_{50}$ was 20.1 min.; for those hardened for 60 min. the $t_{50}$ was 25.0 min.; for those hardened for 120 min., the $t_{50}$ was 35.8 min. The surface of the unhardened microcapsules was smooth and had no cracking or pore penetration. However, the surface of the hardened microcapsules was folded and invaginated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.306-310
• /
• 1996

In this paper a series of developing process for an insulator which can be employed in overhead distribution lines, using polymeric composite materials, is introduced. In order to design an insulator for heavily polluted area, weathershed of alternating type was adopted, which could have longer leakage distance. Modified EVA was used as surface material which has good electrical and mechanical characteristics as well as superior chemical stability. FRP core was covered with above surface material through heat shrinking process. By standardization of each process, higher productivity and lower production cost could be ensured. The developed insulator has been put under various tests including long-term field test and artificial aging test and satisfactory results were obtained.

• Korean Membrane Journal
• /
• 제10권1호
• /
• pp.39-45
• /
• 2008

Polyelectrolyte complex based on two anionic polysaccharides, composed of sodium alginate and carrageenan, were prepared by interacting with divalent calcium ions in solution. The effects of annealing on the structural deformation of polyelectrolyte complex and on their characteristics at removing water from a methanol mixture from the point of molecular sieve were investigated and discussed. The result showed that the structural deformation of the annealed polyelectrolyte complex has an effect on the free volume between these polymer chains and the chelate segments such a shrinking of the overall morphology, which act as a molecular sieve in the separation of methanol and water mixtures.

• Preventive Nutrition and Food Science
• /
• 제16권3호
• /
• pp.261-266
• /
• 2011

Supercritical $CO_2$ pretreatment before dehydration leads to a faster dehydration rate. The best supercritical $CO_2$ pretreatment conditions for the most effective dehydration were $45^{\circ}C$, 25 MPa and $55^{\circ}C$, 25 MPa. Increasing pressure of the supercritical $CO_2$ pretreatment system tended to accelerate the dehydration rate more than increasing temperature did. Samples pretreated at higher temperatures and pressures showed greater shrinking and pore distribution on scanning electron microscopy. Control samples maintained their cell walls, whereas samples pretreated at higher temperatures and pressures showed more cell disruption, and more pores were observed. Pore sizes of control and pretreated samples were about 100 and $70{\sim}80\;{\mu}m$, respectively. Samples pretreated at higher temperatures and pressures had smaller pores and a denser distribution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1510-1512
• /
• 2000

Due to the shrinking of the chip size and increasing of the complexity in the modern electronic devices. the defect of wafer are so important to decide the yield in the device process. The engineers has studied the wafer defects and the characteristics. They published lots of the experimental methods. I did an experiment the gettering effect of the defects due to the high temperature and the long time diffusion. Actually, As the thickness of the wafer backside polysilicon is thicker and the diffusion time is faster. the defects on the wafer are decreased. The polysilicon gram boundaries of the wafer backside played an important part as the defect gettering site.