• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1175-1184
• /
• 2022

The pore structure of uranium-bearing sandstone is one of the critical factors that affect the uranium leaching performance. In this article, uranium-bearing sandstone from the Yili Basin, Xinjiang, China, was taken as the research object. The fractal characteristics of the pore structure of the uranium-bearing sandstone were studied using mercury intrusion experiments and fractal theory, and the fractal dimension of the uranium-bearing sandstone was calculated. In addition, the effect of the fractal characteristics of the pore structure of the uranium-bearing sandstone on the uranium leaching kinetics was studied. Then, the kinetics was analyzed using a shrinking nuclear model, and it was determined that the rate of uranium leaching is mainly controlled by the diffusion reaction, and the dissolution rate constant (K) is linearly related to the pore specific surface fractal dimension (D_S) and the pore volume fractal dimension (D_V). Eventually, fractal kinetic models for predicting the in-situ leaching kinetics were established using the unreacted shrinking core model, and the linear relationship between the fractal dimension of the sample's pore structure and the dissolution rate during the leaching was fitted.

• Journal of the Korean Society of Combustion
• /
• v.13 no.4
• /
• pp.26-36
• /
• 2008

Experimental study is conducted to identify the existence of a shrinking flame disk and to clarify its flame characteristics through the inspection of critical mole fraction at flame extinction and edge flame oscillation at low strain rate flames. Experiments are made as varying global strain rate, velocity ratio, and burner distance. The transition from a shrinking flame disk to a flame hole is verified through gradient measurements of maximum flame temperature. The evidence of edge flame oscillation in flame disk is also provided through numerical simulation in microgravity. It is found at low strain rate flame disks in normal gravity that buoyancy effects are importantly contributing to lateral heat loss to burner rim, and is proven through critical mole fraction at flame extinction, edge flame oscillation, and measurements of flame temperature gradient along flame disk surface.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.16-19
• /
• 2010

Devolatilization characteristics of municipal wood waste were measured by using an isothermal thermogravimetric analyzer(TGA) and discussed. Volatile matter was mainly released at temperatures between $250^{\circ}C$ and $350^{\circ}C$. The volatile content increased with an increase of temperature but levelled off at temperatures ${\geq}527^{\circ}C$. The rate of devolatilization could be expressed by a shrinking particle model which was ruled by the reaction rate. The activation energy ranged from 13.1 to 18.5 kJ/g mol.

• Journal of the Korean Regional Science Association
• /
• v.35 no.4
• /
• pp.33-45
• /
• 2019

Due to the global low growth trend, urban shrinkage is a major issue of urban policy in major industrialized countries. According to the research results of the KRIHS(Korea Research Institute for Human Settlements, 2016), 23 out of 77 cities in Korea were diagnosed as continuous or temporary shrinking cities. However, the criterion for diagnosing shrinking cities remain on the simple demographic side, and the spatial shrinkage pattern of the city is not considered. Therefore, this study diagnosed urban shrinkage phenomenon considering the characteristics of Yeong-ju, a poly-centric city, by using the population gradient curve, which is one of the urban spatial structure analysis methods. As a result of the diagnosis, Yeong-ju turned out to be a shrinking city with the population density and the slope of population density increasing. In the case of area of Dong, a sprawl phenomenon in which the population density of the CBD and the slope of the population density were decreased was shown. And in the case of Punggi-eup, a simple shrinkage phenomenon in which only the population density of the CBD was decreased was shown. The results show that even within a city, the pattern of spatial change can be different for each centers. In the case of a city with a poly-centric structure, the implications for the individual diagnosis of not only the entire city but also the detailed area were drawn.

• Research in Plant Disease
• /
• v.10 no.2
• /
• pp.145-149
• /
• 2004

'Hongro' is one of the most important apple cultivars whose growing area is increasing because of its good quality. Recently fruit shrinking symptom causing decrease of fruit size, juice, and quality, appears in some commercial 'Hongro' orchards. The average frequency of occurrence of fruit shrinking symptom was 12 % of total trees investigated and Apple chlorotic leaf spot virus (ACLSV) was detected from all the trees showing fruit shrinking symptom by ELISA. A typical virus infection symptom of leaf epinasty and stem necrosis appeared on woody indicators, Spy227 and Virginia crab grafted with infected trees and all the grafted trees showed positive reaction to ACLSV antiserum by ELISA. It was proved that ACLSV can be easily transmitted by grafting. ACLSV was also isolated from the leaves of C. quinoa inoculated with sprouting leaf sap of infected trees. To prove that the fruit shrinking symptom was caused by ACLSV infection, ACLSV-infected scion was grafted on virus-free 'Hongro/M9' and the fruit characteristics were investigated. Consequently the same symptoms of fruit size and juice decreasing were observed from the trees grafted with ACLSV-infected scion. Therefore, it is suggested that the fruit shrinking symptom is caused by ACLSV infection and 'Hongro' can be classified as sensitive cultivar to ACLSV.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.68-75
• /
• 2000

In this study, polyester DTY faille(yoryu) and N/NP microfiber fabrics were pretreated (desizing, scouring and shrinking) by Continuous Scouring and Shringking Equipment with rota-drum and conveyor type in which types were different with retaining method. The results were as follows. The shrinkage ratio of wp/wf direction of DTY fabrics scoured by conveyor type was 1.5/23% higher than those by rota-drum type at $97^\circ{C}$ with 10min. treatment. In this case, The shrinkage ratio of wp/wf direction by those types was about 15/27%, respectively. The shrinkage ratio of wp/wf direction of N/NP microfiber fabrics scoured by conveyor type was 1.5/23% higher than that by rota-drum type at $97^\circ{C}$ with 10min. treatment. The size add-on of DTY fabrics scoured at $97^\circ{C}$ with 10min. treatment by conveyor type and by rota-drum type were 0.15% and 0.42%, respectively. The size add-on of DTY fabric treated by rota-drum type decreased until 9min. of treated time, but increased after 9min. The size add-on of N/NP microfiber fabrics treated by conveyor type was decreased by increasing temperature and treated time, while the size add-on of that treated by rota-drum type was decreased until 6min. treated time and increased after 6min. The size add-on of N/NP microfiber fabrics treated by conveyor type at $97^\circ{C}$ for 10min. was 0.3% lower than that by rota-drum type.

• Journal of the Korean Society of Combustion
• /
• v.15 no.2
• /
• pp.41-49
• /
• 2010

Various coals from many countries around the world have been used for pulverized coal boiler in power plants in Korea. In this study, the gasification reactivities of various coal chars with $CO_2$ were investigated. Carbon conversion was measured using a real time gas analyzer with NDIR CO/$CO_2$ sensor. In a lab scale furnace, each coal sample was devolatilized at $950^{\circ}C$ in nitrogen atmosphere and became coal char and then further heated up to reach to a desired temperature. Each char was then gasified with $CO_2$ under isothermal conditions. The reactivities of coal chars were investigated at different temperatures. The shrinking core model (SCM) and volume reaction model(VRM) were used to interpret the experiment data. It was found that the SCM and VRM could describe well the experimental results within the carbon conversion of 0-0.98. The gasification rates for various coals were very different. The gasification rate for any coal increased as the volatile matter content increased.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.136-141
• /
• 2023

The continuous shrinking of transistors in integrated circuits leads to difficulties in improving performance, resulting in the emerging transistors such as nanosheet field-effect transistors. In this paper, we propose a TCAD-machine learning framework of nanosheet FETs to model the current-voltage characteristics. Sentaurus TCAD simulations of nanosheet FETs are performed to obtain a large amount of device data. A machine learning model of I-V characteristics is trained using the multi-layer perceptron from these TCAD data. The weights and biases obtained from multi-layer perceptron are implemented in a PSPICE netlist to verify the accuracy of I-V and the DC transfer characteristics of a CMOS inverter. It is found that the proposed machine learning model is applicable to the prediction of nanosheet field-effect transistors device and circuit performance.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.175-176
• /
• 2016

In this study, research is in order to prevent the defects that occur when the polished tiles construction. For material to be used when the polishing tile construction, trying to evaluate the shrinkage characteristics when the environmental conditions change. Depending on the material used for the shrinkage characteristics evaluation results, the difference between the change values of the length of the drying shrinkage becomes large. Therefore, there is a need for the construction method with consideration of the characteristics of the materials used.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.103.2-108
• /
• 2003

The purpose of this study is to understand the Physical characteristics of cement mortar about humidity control on indoors and wall crack restraint. Experiments were conducted on the strength, water absorption coefficient, drying-shrinking crack, length change, cracks of mortar plaster bases according to mixture rate by mixing cellulose fiber and diatomite into cement mortar. The excellent tensile & bending reinforcement efficiency of cellulose fiber and void filling ability of diatomite proved to be suppressing cracks of cement. And diatomite seems to improve moisture-protection efficiency of cement mortar because of its high water absorption ratio and slow drying speed.