• Korean Journal of Food Science and Technology
• /
• v.7 no.3
• /
• pp.159-167
• /
• 1975

Present work was conducted to investigate the combined effects of gamma-radiation and chemical treatment on the inhibition of sprouting and decay of potato tubers. Irish Cobbler, Apollo and Shimabara potato tubers were immersed in 1000, 2000 and 3000 ppm solution of salicylic acid for 2 minutes, and then irradiated at doses of 5, 10, and 15 krad using an indoor gamma room of approximately 10,000 Ci of $^{60}Co$. Treated tubers were stored for 8 months at room temperature. The results of this work are summarized as follows: 1. Moisture content of irradiated potato tubers was changed less than the control, and decreased gradually along with an extended storage period. Ascorbic acid content was remarkably decreased by gamma-radiation and an extended storage period. 2. Reducing sugar content of irradiated potato tubers tended to increase greatly compared with unirradiated potato tubers, however, starch content of irradiated potato tubers decreased compared with the control. Reducing sugar and starch content of all groups also decreased gradually along with an extended storage period. 3. The storageability of Irish Cobbler variety was best among three varieties and Shimabara variety was worst among them when gamma-radiation is treated singly or in combination with the chemical. Sprouting of potato tubers was more suppressed in combination treatment than single treatment. 4. Decay of potato tubers was more reduced in combination treatment than single treatment. Chemical treatment or gamma-radiation followed by chemical treatment had no influence on decay or spronting of potato tubers. 5. Weight loss of potato tubers was considerably increased as storage period became extended. Shrinkage was, more serious in Shimabara than in rish Cobbler.

• Journal of Bio-Environment Control
• /
• v.6 no.4
• /
• pp.250-257
• /
• 1997

Stem diameter and shoot fresh weight of tomato grown in greenhouse were measured non-destructively at 10 minutes interval from 1 to 16 July, 1996 with displacement detector using strain gauges and with suspension-type load cell, respectively, and simultaneously were measured soil water potential, transpiration and solar radiation. Ample water was irrigated before experiment, and thereafter, irrigations were made on the next morning when visual symptoms of wilting appeared. Shoot fresh weight and stem diameter showed very similar patterns in diurnal changes which are characterized by predawn maximum and afternoon minimum and in long- term evolutions, suggesting that stem diameter shrinkage and expansion are closely related to plant water content and growth, respectively, Shoot weight and stem diameter reached minimum values a little later than the time on which transpiration showed maximum. The daily net gains of fresh weight(DG) and stem diameter(DI) showed significantly Positive correlations with solar radiation in those days on which plants were not water-stressed. However, Dl and DG on those days of water stress showed much lower values than expected from the relationships between solar radiation and them. Transpiration was much lower than the expected potential transpiration on 10 July, implying that plants were water-stressed. In this case water stress was not detected from visual symptom of wilting and/or soil water potential, but was able to be identified by the lower DI and DG than the expected. The maximum contraction of stem diameter(MC) and the maximum loss of fresh weight(ML) during daytime showed significantly positive correlations with solar radiation in those days on which plants were not water-stressed and were observed greater than expected from the relationships on severely water-stressed days. But mild water stress could not be discernable by ML and MC. It would be concluded that the daily net gains of fresh weight and/or stem diameter could be used as criteria for diagnosing the water status of tomato and for triggoring the onset of irrigation in automatic system.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.55-62
• /
• 2006

Transverse cracks in continuously reinforced concrete pavement (CRCP) occur at early ages due to temperature and moisture variations. The width and spacing of transverse cracks have a significant effect on pavement performance such as load transfer efficiency and punchout development. Also, crack widths in CRCP depend on 'zero-stress temperature,' which is defined as a temperature where initial concrete stresses become zero, as well as drying shrinkage of concrete. For good long-term performance of CRCP, transverse cracks need to be kept tight. To keep the crack widths tight throughout the pavement life, zero-stress temperature must be as low as practically possible. Thus, temperature control at early ages is a key component In ensuring good CRCP performance. In this study, concrete temperatures were predicted using PavePro, a concrete temperature prediction program, for a CRCP construction project, and those values were compared with actual measured temperatures obtained from field testing. The cracks were also surveyed for 12 days after concrete placement. Findings from this study can be summarized as follows. First, the actual maximum temperatures are greater than the predicted maximum temperature in the ranges of 0.2 to 4.5$^{\circ}C$. For accurate temperature predictions, hydration properties of cementitious materials such as activation energy and adiabatic constants, should be evaluated and accurate values be obtained for use as input values. Second, within 24 hours of concrete placement, temperatures of concrete placed in the morning are higher than those placed in the afternoon, and the maximum concrete temperature occurred in the concrete placed at noon. Finally, from the 12 days of condition survey, it was noted that the rate of crack occurrence in the morning placed section was 25 percent greater than that in the afternoon placed section. Based on these findings, it is concluded that maximum concrete temperature has a significant effect on crack development, and boner concrete temperature control is needed to ensure adequate CRCP performance.

• Food Science and Preservation
• /
• v.9 no.3
• /
• pp.271-276
• /
• 2002

To develop a wrapping film, which suppresses the microbial decay through the storage and prolongs the selflife of fruits and vegetables, the antimicrobial packaging films were prepared and applied to the preservation of strtwberries and cucumbers. Low density polyethylene(LDPE) film of 50㎛ thickness was faricated with 1% of Scutellariae baicalensis extract. The LDPE film impregnated with Scutellariae baicalensis extract showed antimicrobial activity on the disk test against Bacillus cereus, Escherchia coli and Fusarium sp.. The antimicrobial film changed the color and light transmittance, but did not affect heat shrinkage, mechanical tensile strength and wattability. Strawberries and cucumbers were separately wrapped with packaging films in the state of closely-adhered packaging as well as modified atmosphere packaging(MAP). The wrapped strawberries and cucumbers were stored for 21 days at 5$\^{C}$ and for 40 days at l0$\^{C}$, respectively. For the packaged strawberries and cucumbers at 5$\^{C}$ and 10$\^{C}$, the LDPE film impregnated with Scutellariae baicalensis extract showed the reduced growth of total aerobic bacteria, molds and yeasts and did not give any negative effect on other quality attributes during storage in comparison with conttrol film without any additive.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1079-1085
• /
• 2003

Modified atmosphere packaging was applied to oyster mushrooms (Pleurotus ostreatus) to study the effect of storage temperatures and packaging materialso. Whole mushrooms (200g) were package with polyethylene film $(PE,\;60{\mu}m\;thickness)$, ethylene vinyl acetate (EVA), or ceramic film (containing 5% zeolite) and stored at 0, 5, 10 and $20^{\circ}C$. Weight loss, color, firmness, gas composition $(O_2,\;CO_2)$ inside the film package and ethanol content in the tissue of MA packaged mushrooms were examined. Mushroom that were packed unwrapped in a conventional hardboard box (2 kg) lost marketability at a very early stage of storage due to weight loss, shrinkage, browning, and spore formation. During storage, film packaging prevented or retarded the deterioration of the mushrooms in the aspects of appearance, texture, and discoloration. Firmness slightly decreased with storage time. Total color difference was much higher in the control than in the film-packaged mushroom and rapidly increased at the early of storage. Correlation analysis showed a high correlation between total color difference and b values. These results were characterized by the reduced respiration rate resulting from elevated carbon dioxide and reduced oxygen levels in the package. At all storage temperatures, ethanol content in the tissue increased slightly at the early part of storage and rose considerably towards the end of the storage period. Ethanol content in the oyster mushrooms was higher in the stipe than in pileus tissues. The shelf life of the oyster mushrooms was about $8{\sim}11$ days at $0^{\circ}C$, about $4{\sim}6$ day at $5^{\circ}C$, about $2{\sim}3$ days at $10^{\circ}C$, and about $1{\sim}2$ days at $20^{\circ}C$.

• Journal of Life Science
• /
• v.30 no.7
• /
• pp.606-613
• /
• 2020

This study investigated the effect of olive oil substitution ratio on physicochemical quality of pork patty. Five treatments were performed as follows: control (T0, 20% pork fat), T1 (pork fat 15% and olive oil gel 5%), T2 (pork fat 10% and olive oil gel 10%), T3 (pork fat 5% and olive oil gel 15%), and T4 (olive oil gel 20%). The moisture increased and fat amount was decreased in proportion to olive oil substitution ratio. The L^* and a^* values were highest levels in raw and cooked pork patty of T0, and the b^* value was highly enhanced in of cooked pork patty of T4. The water holding capacity, moisture and fat retention were significantly increased, and the cooking loss, diameter reduction and shrinkage ratio were decreased by olive oil substitution ratio. The hardness, springiness and chewiness showed the highest level in T4, and the cohesiveness and gumminess were highest in T0. The reduction ratio of cholesterol in T1, T2, T3 and T4 were 13.8%, 21.6%, 34.5% and 49.0%, respectively, indicating that the content was lowest level in T4. The palmitic acid was the most abundant saturated fatty acid, and the oleic acid was the most abundant unsaturated fatty acid. The unsaturated fatty acid of pork patty was increased in proportion to olive oil substitution ratio. Therefore, the olive oil gel substitution of low-fat pork patty results in a positive effect on the physicochemical qualities due to reduced cholesterol and saturated fatty acids.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.1
• /
• pp.163-170
• /
• 2006

Nardostachyos Rhizoma (N. Rhizoma) belonging to the family Valerianaceae has been anti-arrhythmic effect, and sedation to the central nerve and a smooth muscle. We reported that the water extract of N. Rhizoma induced apoptotic cell death and differentiation in human promyelocytic leukemia (HL-60) cells. Cytotoxicity of N. Rhizoma was detected only in HL-60 cells (IC50 is about 200 ${\mu}g/ml$). The cytotoxic activity of N. Rhizoma in HL-60 cells was increased in a dose-dependent manner. We used several measures of apoptosis to determine whether these processes were involved in N. Rhizoma-induced apoptotic cell death. The high-dose (200 ${\mu}g/ml$) treatment of N. Rhizoma to HL-60 cells showed cell shrinkage, cell membrane blobbing, apoptotic bodies, and the fragmentation of DNA, suggesting that these cells underwent apoptosis. Treatment of HL-60 cells with N. Rhizoma time-dependently induced activation of caspase-3, caspase-8, and caspase-9 and proteolytic cleavage of poly(ADP-ribose) polymerase. Also, we investigated the effect of N. Rhizoma on cellular differentiation and proliferation in HL-60 cells. Differentiation and proliferation of HL-60 cells was determined through expression of CD11b and CD14 surface antigens using flow cytometry and nitroblue tetrazolium (NBT) assay, and through analysis of cell cycle using propidium iodide assay, respectively. N. Rhizoma induced the differentiation of HL-60 at the low-dose (100 ${\mu}g/ml$) treatment, as shown by increased expression of differentiation surface antigen CD11b, but not CDl4 and increased reducing activity of NBT. When HL-60 cells were treated with N. Rhizoma at concentration of $50{\mu}g/ml\;and\;100{\mu}g/ml$, NBT-reducing activities induced approximately 1.5-fold and 20.0-fold as compared with the control. In contrast, HL-60 cells treated with the N. Rhizoma-ATRA combination showed markedly elevated levels of 26.3-fold at $50{\mu}g/ml$ N. Rhizoma-0.1 ${\mu}M$ ATRA combination and 27.5-fold at 50 ${\mu}g/ml$ N. Rhizoma-0.2 ${\mu}M$ ATRA combination than when treated with N. Rhizoma alone or ATRA alone. It may be that N. Rhizoma plays important roles in synergy with ATRA during differentiation of HL-60 cells. DNA flow-cytometry indicated that N. Rhizoma markedly induced a G1 phase arrest of HL-60 cells. N. Rhizoma-treated HL-60 cells increased the cell population in G1 phase from 32.71% to 42.26%, whereas cell population in G2/M and S phases decreased from 23.61% to 10.33% and from 37.78% to 33.98%, respectively. We examined the change in the $p21^{WAF1/Cip1}\;and\;p27^{Kip1}$ proteins, which are the CKIs related with the G1 phase arrest. The expression of the CDK inhibitor $p27^{Kip1},\;but\;not\;p21^{WAF1/Cip1}$ were markedly increased by N. Rhizoma. Taken together, these results demonstrated that N. Rhizoma induces apoptotic cell death through activation of caspase-3, and potently inhibits the proliferation of HL-60 cells via the G1 phase cell cycle arrest in association with $p27^{Kip1}$ and granulocytic differentiation induction .