• 제목/요약/키워드: short-range radio device

검색결과 10건 처리시간 0.023초

FHSS 및 DSSS 방식 소출력 무선기기간 간섭분석에 관한 연구 (A study on interference analysis between FHSS atd DSSS short range radio devices)

  • 최재혁;구성완;정규일;김진영
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2009년도 정보통신설비 학술대회
    • /
    • pp.242-247
    • /
    • 2009
  • In this paper, we investigate interference between short-range radiocommunication devices (SRDs) with frequency hopping spread spectrum (FHSS) and direct sequence spread spectrum (DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-Carlo (MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate (BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than bandwidth does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

  • PDF

FHSS 및 DSSS 방식 소출력 무선기기간 간섭 분석에 관한 연구 (A Study on Interference Analysis between FHSS and DSSS Short Range Radio Devices)

  • 김진영;김은철;양재수;류충상;오성택
    • 한국전자파학회논문지
    • /
    • 제19권2호
    • /
    • pp.271-279
    • /
    • 2008
  • 본 논문에서는 FHSS 방식의 소출력 무선기기와 DSSS 방식의 소출력 무선기기가 동일 주파수 대역에 존재하는 경우 업무간 간섭을 분석하였다. 분석 방법은 몬테 카를로 방법을 이용하여 DSSS 방식의 소출력 무선기기의 불요 방사가 FHSS 방식의 소출력 무선기기에 미치는 영향을 간섭 확률 측면에서 계산하였다. 간섭 시뮬레이션은 DSSS 방식의 소출력 무선기기의 대역폭과 충격 계수에 따른 간섭량을 계산하였고, 전파 모델은 자유 공간으로 가정하였다. 그리고 간섭원과 피간섭원 사이의 거리에 따른 영향을 수신기에서의 BER 측면에서 분석하였다. 간섭 분석 결과, 간섭원의 대역폭보다는 충격 계수가 시스템 양립성에 많은 영향을 주는 것을 확인할 수 있었고, 단일 간섭원과 다중 간섭원이 존재하는 경우 BER 기준을 만족하는 이격 거리를 확인할 수 있었다.

소출력 무선설비 관리제도 개선 방향

  • 여경진;윤세정;염호선;류충상
    • 한국전자파학회지:전자파기술
    • /
    • 제12권4호
    • /
    • pp.13-23
    • /
    • 2001
  • 최근, 디지털 통신 기술의 발전과 더불어 소출력 무선설비의 신뢰성이 향상되고, 이동성을 기반으로 한 무선 정보통신 수요가 급증함에 따라 소출력 무선설비의 수요가 폭발적으로 증가하고 있다. 본 연구에서는 국내 소출력무선설비 관리제도를 조명해 보고, 새로운 통신서비스와 기술을 수용하는데 필요한 제도개선 방안을 제시하였다. 주파수 자원 연구, 전파 환경 연구 등 일부 연구가 수반되어야 하는 부분도 있지만, 본 연구에서 논의한 소출력 무선설비 관리제도상의 개선방향이 전파관리 측면에서나 전파 이용기술 개발 및 근거리 전파통신 활성화 측면에서 그 기대를 만족시킬 수 있으리라 기대된다.

  • PDF

효율적인 원거리 데이터 전송을 위한 Zigbee 노드들의 그룹화 알고리즘 (Grouping Algorithms of Zigbee Nodes for Efficient Data Transmission to Long Range)

  • 우성제;신복덕
    • 전기학회논문지
    • /
    • 제61권4호
    • /
    • pp.632-638
    • /
    • 2012
  • ZigBee network, based on PHY, MAC layer provides a specification for a suite of high level communication protocols using small, low-power digital radio based on an IEEE 802.15.4 standard. Meshing is a type of daisy chaining from one device to another. This technique allows the short range of an individual node to be expanded and multiplied, covering a much larger area. Each wireless technology that makes it to market serves a special purpose or function. Zigbee provides short-range connectivity in what is called a personal-area network (PAN). Within ZigBee PAN coordinator as manages an entire ZigBee network, the short range of frequency band was only selected because the technology allows typically less than 100 kbp or ZigBee troubles in retransmission processing and delaying data tranmission works to create unproductive condition of work. This research was proposed the method, based on short range frequency of zigBee nodes enable to long range of remote data transmission with specific algorithm tools.

블루투스 기술기준과 발전방향

  • 황준식;여경진;류충상;왕진원
    • 한국전자파학회지:전자파기술
    • /
    • 제12권4호
    • /
    • pp.3-12
    • /
    • 2001
  • 블루투스는 정보, 가전 및 산전기기 등의 복잡한 통신 케이블 대체용으로 개발된 무선통신 규격 또는 그 규격을 사용한 제품을 말하는 것으로 무선통신의 이동성과 간편성에 힘입어 여러 근거리 통신 응용분야에서 많은 변화를 불러 올 것으로 기대되었다. 하지만, 최근 블루투스 본연의 기능에 충실하기보다는 이동통신 대체수단으로 기획됨에 따라 이의 실효성에 의문점이 시사되고 있으며, 이에 대한 장기적인 발전 전망이 요구되는 시점이다. 본 연구에서는 블루투스 기술기준을 충심으로 블루투스의 현황을 점검하고 향후 블루투스의 발전방향을 예측, 기술기준적 측면에서 제도적 지원방향을 제안하였다.

  • PDF

블루투스를 이용한 무선 헤드셋 구현 (Implementation of the wireless headset using Bluetooth)

  • 이병로
    • 한국정보통신학회논문지
    • /
    • 제7권6호
    • /
    • pp.1138-1145
    • /
    • 2003
  • 블루투스 기술은 휴대용 장치와 전자제품 사이에 저전력, 저비용, 근거리 무선 연결을 위한 근거리 무선 통신을 위한 새로운 표준이다. 이 기술은 장치들 사이에 복잡스러운 케이블, 케넥터 그리고 혼란스러운 통신 프로토콜을 제거 할 수 있다. 휴대폰, 페이져, 랩탑, PDA, 디지털 카메라 그리고 더 많은 장치들은 생산과정에서 통신을 위한 공통된 구조를 갖게 된다. 본 논문에서는 휴대폰과 헤드셋 사이의 통신을 위한 블루투스 프로토콜 스택과 헤드셋 프로파일을 나타낸다. 그리고 나서 블루투스 프로토콜 스택에 의해서 응용을 조작하는 장치에 내장되어 있는 응용 소프트웨어를 구성한다. 다음으로 실제 동작 시스템을 사용하지 않고 MSP430을 사용하여 무선 헤드셋을 구현한다.

Design of a bluetooth-based interactive control network

  • Kwak, Jae-Hyuk;Lim, Joon-Hong
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.922-925
    • /
    • 2004
  • Bluetooth technology is essentially a method for wireless connection of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments. The bluetooth system supports both point-to-point connection and point-to-multipoint connections. In point-to-multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There is one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The Bluetooth standard has been suggested that Bluetooth equipments can be used in the short-range, maximum 100 meters . It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

  • PDF

이동 시스템 제어를 위한 블루투스 네트워크 (Bluetooth Network for Mobile System Control)

  • 임준홍;곽재혁
    • 제어로봇시스템학회논문지
    • /
    • 제10권11호
    • /
    • pp.1052-1057
    • /
    • 2004
  • Bluetooth technology is essentially a method for wireless connectivity of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments, The bluetooth system both point-to point connection and point-to multipoint connection. In point-to multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The bluetooth standard ha s been suggested that bluetooth equipments can be used in the short-range, maximum 100 meters. It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

저압화학증착을 이용한 실리콘-게르마늄 이종접합구조의 에피성장과 소자제작 기술 개발 (Development of SiGe Heterostructure Epitaxial Growth and Device Fabrication Technology using Reduced Pressure Chemical Vapor Deposition)

  • 심규환;김상훈;송영주;이내응;임정욱;강진영
    • 한국전기전자재료학회논문지
    • /
    • 제18권4호
    • /
    • pp.285-296
    • /
    • 2005
  • Reduced pressure chemical vapor deposition technology has been used to study SiGe heterostructure epitaxy and device issues, including SiGe relaxed buffers, proper control of Ge component and crystalline defects, two dimensional delta doping, and their influence on electrical properties of devices. From experiments, 2D profiles of B and P presented FWHM of 5 nm and 20 nm, respectively, and doses in 5×10/sup 11/ ∼ 3×10/sup 14/ ㎝/sup -2/ range. The results could be employed to fabricate SiGe/Si heterostructure field effect transistors with both Schottky contact and MOS structure for gate electrodes. I-V characteristics of 2D P-doped HFETs revealed normal behavior except the detrimental effect of crystalline defects created at SiGe/Si interfaces due to stress relaxation. On the contrary, sharp B-doping technology resulted in significant improvement in DC performance by 20-30 % in transconductance and short channel effect of SiGe HMOS. High peak concentration and mobility in 2D-doped SiGe heterostructures accompanied by remarkable improvements of electrical property illustrate feasible use for nano-sale FETs and integrated circuits for radio frequency wireless communication in particular.

WPAN용 디지털 음향기기 및 통신기기간 스펙트럼 상호운용을 위한 채널 할당기술에 관한 연구 (Common Spectrum Assignment for low power Devices for Wireless Audio Microphone)

  • 김성권;차재상
    • 한국지능시스템학회논문지
    • /
    • 제18권5호
    • /
    • pp.724-729
    • /
    • 2008
  • 본 논문에서는 WPAN(Wireless Personal Area Network) 기반의 디지털 음향기기 및 소출력 무선 통신기기를 운용함에 있어서, 한정된 주파수 자원을 효율적으로 할당하기 위한 공유 주파수 대역폭의 산출법을 제시한다. WPAN 기반의 디지털 음향기기 및 통신기기로서는 Digital Cordless Phone (DCP)과 Bluetooth를 비롯하여, RFID와 ZigBee기술을 고려하였다. 또한, 본 논문에서는 상기 WPAN 기반의 디지털 음향기기 및 통신기기간의 스펙트럼 운용 측면에 따른 적용 방식을 DCP, RFID, Bluetooth는 FH (Frequency Hopping) 방식으로, ZigBee는 LBT(Listen Before Talk) 방식으로 분류한 후 대기행렬 이론에 근거한 스펙트럼 상호운용을 위한 채널할당기법을 제시하였다. 본 논문에서는 대기행렬이론 (queuing theory)을 WPAN 기반의 디지털 음향기기 및 통신기기간의 스펙트럼 운용기법에 적용하기 위하여, FH 시스템과 LBT 시스템을 모델링하였고, 컴퓨터 시뮬레이션을 통하여 소요대역폭 산출을 수행했다. 채널수 별 user의 통신시도에 따른 throughput을 분석한 결과, throughput 84% 이상의 조건에서 FH 및 LBT 방식을 사용하는 250mW WPAN 기반의 디지털 음향기기 및 통신기기들이 공존하는 공유주파수대역의 적정 채널수는 35개를 가지며, 총 소요대역폭은 각각의 WPAN기반의 디지털 음향기기 및 통신기기들의 채널수와 채널대역폭의 곱으로 산출이 가능함을 보였다.