• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.9-15
• /
• 2013

This paper presents a uniform analytical model by energy method and Fourier series expansion to analyze detent force in uneven magnetic field for permanent magnet linear synchronous motor (PMLSM). The model reveals that detent force in long-primary type is mainly influenced by non-ideal distribution of permanent magnet magnetic motive force, while nounified air-gap permeance makes a great impact on detent force of short-primary type. Hence, magnetic field similarity of motor design techniques referring rotary counterpart are adopted. For long-primary type novel method of splitting edge magnets is proposed to reduce end effects force, and optimal widths of edge tooth in short-primary type also verify the effectiveness of magnetic field similarity. The experimental results validate finite element analysis results.

• 치과방사선
• /
• 제22권1호
• /
• pp.87-94
• /
• 1992

The purpose of this study was to evaluate the effect of scatter radiation to dental x-ray film with long time-exposure in the different structures of the tooth, by using pinhole camera. For this study, pinhole camera, skull with tooth, and pocket dosimeter were used. The radiation with 70 and 90kVp and exposure time (minimum: 2.5 min., maximum 10 hrs.) was projected to the film in the pinhole camera. And density of the obtained x-ray film was measured with densitometer. In the intra-oral film taking, the amount of exposure of the scatter radiation affecting the thyroid gland area was measured with the dosimeter at the thyroid gland. The density of radiographs was compared in radiation projected with or without the metal cone of dental machine. The effect of the back scatter radiation to the film was also evaluated when the lead foil was removed. The obtained results were as follows: 1. A pinhole camera was a valuable device for locating the source of x-ray. 2. The scatter radiation affected the dental x-ray film when the radiation source was exposed. more than 5 hours'. In that case, the density of the scatter radiation could be observed visually. 3. The scatter radiation caused by short exposure of dental radiation didn't affect the diagnostic quality of the dental x-ray film. 4. The differences of densities between the tooth and the soft tissue according to exposure time showed 0.16 in 5 hours' exposure & 0.17 in 10 hours' exposure at 70 kVp & 0.12 in 5 hours' exposure & 0.13 in 10 hours' exposure at the 90kVp. 5. The differences of densities between the tooth and the soft tissue according to kVp showed no difference between 5 hours' exposure of tooth at 70 kVp and soft tissue at 90 kVp, but showed 0.05 high density in tooth when 10 hours' exposure at 90 kVp. 6. No difference of density was on radiographs taken with or without dental machine cone. 7. Back scatter radiation was recorded image of radiographs for only 3 min. 8. The amounts of the scatter radiation exposed to the thyroid gland in intraoral film taking were 1.12 mr in upper anterior, 0.55 mr in upper posterior, 2.75 mr in lower anterior, and 1.92 mr in lower posterior teeth.

• Applied Microscopy
• /
• 제38권4호
• /
• pp.375-382
• /
• 2008

삼차신경주감각핵에서 치수유래 일차들신경섬유의 종말과 그에 연접하는 연접이전신경종말에 함유된 연접소포들을 형태학적으로 비교하기 위하여 신경추적자(WGA-HRP)를 흰쥐 앞니의 치수강에 주입하여 치수 유래 일차들신경종말을 표식한 후, 투과형 전자현미경을 통한 미세구조적 정량 분석을 실시하였다. 표식된 치수유래 일차들신경종말은 직경이 $45{\sim}55\;nm$인 구형의 소포를 함유하고 있었으며, 일부 직경이 $80{\sim}120\;nm$ 큰 치밀소포가 관찰되기도 하였다. 또한 표식된 신경종말은 다형성 연접소포를 함유하고 있는 연접이전신경종말과 대칭연접을 이루고 있었다. 일차들신경종말의 연접소포들은 긴 지름에 대한 짧은 지름의 비율(form factor)이 $0.6{\sim}0.99$의 분포를 보인 반면, 연접이 전신경종말의 연접소포들은 $0.25{\sim}0.99$까지 다양하게 나타났다. 또한 대부분의 연접이전신경종말은 GABA에 대한 면역양성반응을 보였다. 이상의 결과는 표식된 신경종말과 그에 연접하는 연접이전신경종말의 연접소포는 서로 다른 형태를 보이고 있으며, 또한 그 연접이전신경종말이 억제성 신경전달물질인 GABA를 함유하고 있음을 나타낸다.

• Imaging Science in Dentistry
• /
• 제48권3호
• /
• pp.191-199
• /
• 2018

Purpose: This study classified alveolar arch forms and evaluated differences in alveolar bone thickness among arch forms in the anterior esthetic region using cone-beam computed tomography (CBCT) images. Materials and Methods: Axial views of 113 CBCT images were assessed at the level of 3 mm below the cementoenamel junction (CEJ) of the right and left canines. The root center points of teeth in the anterior esthetic region were used as reference points. Arch forms were classified according to their transverse dimensions and the intercanine width-to-depth ratio. The buccolingual alveolar bone thickness of each tooth was measured at 3 mm below the CEJ and at the mid-root level. Differences in the mean thicknesses among arch forms were analyzed. Results: Anterior maxillary arches could be classified as long narrow, short medium, long medium, and long wide arches. Significant differences in buccolingual alveolar bone thickness among the arch groups were found at both levels. The long wide arches presented the greatest bone thickness, followed by the long medium arches, while the long narrow and short medium arches were the thinnest. Conclusion: Arch forms were classified as long narrow, short medium, long medium, and long wide. The buccolingual alveolar bone thickness exhibited significant differences among the arch forms.

• 대한장애인치과학회지
• /
• 제11권1호
• /
• pp.5-8
• /
• 2015

다발성 우식증을 주소로 내원한 7세 1개월의 여자아이가 신경모세포종의 다각적 치료에 따른 치근 형성이상으로 인해 하악 영구절치의 중증도 동요도를 보여 mini-screw를 이용한 레진강선고정을 시행하였다. 이를 통해 동요도의 감소 및 교합안정을 이루었으며, 따라서 하악 영구절치의 치근 형성이상으로 인한 동요도 증가 시 선택적 치료법이 될 수 있을 것이라 생각한다.

• 구강회복응용과학지
• /
• 제30권2호
• /
• pp.170-175
• /
• 2014

성장장애는 두개안면부의 골격성장과 영구치의 조기상실에 영향을 미친다. 본 증례는 성장장애 환자에서 치아를 조기 상실한 부위에 무피판 술식으로 임플란트를 식립 시 컴퓨터 단층촬영(CT)을 통한 인접치아의 확인과 임플란트 가이드의 필요성을 살펴보았다. 특발성 저신장과 3급 정신지체의 20세의 여환에서 구치의 회복을 위해 임플란트 고정성 보철을 계획하였다. CT 영상에서 인접치가 심하게 협측으로 위치되어 있었고, 이를 반영하여 가이드를 제작후 임플란트를 식립하였다. 이상 위치된 인접치를 기준으로 임플란트를 식립할 경우 협측 골의 천공이 발생할 수 있다. 그러므로 성장장애 환자에서 치아 조기 상실부에 임플란트를 식립 시 CT를 통한 치아의 위치 확인과 가이드의 제작이 요구된다.

• 대한치과교정학회지
• /
• 제24권1호
• /
• pp.221-231
• /
• 1994

The short-term effects of plaque control instruction were studied in 42 adolescent orthodontic patients under active fixed treatment. At first visit, all the patients were received plaque control instruction using materials such as oral hygiene education slides, dentiform, disclosing agents, tooth brush and interdental brush. After that, Pateints were asked to perform the tooth brushing according to instructions. Such a procedure was repeated every week lot 3 weeks. Plaque index and bleeding index were scored once a week for 4 weeks and were compared according to ages, sex and duration with fixed appliance. The results were as follows: 1. Plaque control instruction was effective in reducing plaque accumulation and gingival inflammation of the orthodontic patients. 2. The effect of plaque control instruction was continued during 3 weeks among all groups of subjects, and it was prominent at the first week. 3. There was no statistically significant difference in the effects of the plaque control of instruction according to sex, ages, or duration with fixed appliances.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.13-18
• /
• 2011

This study deals with the effect of the honing in SCM420H planetary gears. The hardness, tooth profile, lead and roughness of the gear surface can be improved by honing. Therein, the honing techniques are welcomed especially as one of the physical surface improvement methods. As a result, gear honing reduces vibration and noise, and will increase the life of gear. And gear honing also changes the surface of gear tooth in a short time and price, so it is a very important method in manufacturing industry. But nowadays, it is hard to find the detail information of gear honing. The test gear is a planetary gear which is used in the automotive industry. It is manufactured by the hobbing, shaving, carburizing and honing. This study investigates the effect of honing in surface shape of SCM420H planetary gears, including fatigue strength test and characteristics of honing of SCM420H planetary gears.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.54-59
• /
• 2012

This study dealt with effect of the grinding in SCM420H planetary gears. The hardness, tooth profile, lead and roughness of the gear surface can be improved by grinding process. Therein, the grinding techniques are widely used especially as one of the physical surface improvement methods. As the results, the gear grinding process reduced vibration and noise, and increased the life of the gear. And the gear grinding improved the surface of gear tooth in a short time and low cost, thus, it is a very important process in manufacturing industry. But nowadays, it is hard to find the detail information of gear grinding process. The test piece is a planetary gear which is used in the industrial machine. The manufacture process of the test piece contains hobbing, shaving, carburizing and grinding. This study investigated the effect of the grinding process to the physiognomy and the fatigue strength of test piece which was made by SCM420H.

• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.107-126
• /
• 2002

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.