• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1654-1659
• /
• 2017

The boundary layer of a two-dimensional forced convective flow along a persistent moving horizontal needle in an electrically conducting magnetohydrodynamic dissipative nanofluid was numerically investigated. The energy equation was constructed with Joule heating, viscous dissipation, uneven heat source/sink, and thermal radiation effects. We analyzed the boundary layer behavior of a continuously moving needle in Blasius (moving fluid) and Sakiadis (quiescent fluid) flows. We considered Cu nanoparticles embedded in methanol. The reduced system of governing Partial differential equations (PDEs) was solved by employing the Runge-Kutta-based shooting process. Computational outcomes of the rate of heat transfer and friction factors were tabulated and discussed. Velocity and temperature descriptions were examined with the assistance of graphical illustrations. Increasing the needle size did not have a significant influence on the Blasius flow. The heat transfer rate in the Sakiadis flow was high compared with that in the Blasius flow.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.6
• /
• pp.329-334
• /
• 1995

Transformation system of rolC gene, dwarf gene in Lycium chinenese Mill. established by using system. Pin-punctured leaves induced numerous adventious buds in abaxial side when cultured on 3/2 MS medium containing 2.0 mg/L zeatin. Survival rate and shoot regeneration frequency of leaf explants decreased as kanamycin sulfate level increased. Shoot buds were not regenerated on 3/2 MS medium containing 10 mg/L kanamycin sulfate and 2.0 mg/L zeaein. Of the level tested, 10 mg/L of kanamycin sulfate was optimum in selection of kanamycin sulfate resistant plant. Co-culture time of bacteria and leaf explants was affected at the frequency of shoot regeneration and survival of leaf explants. Leaf explants co-cultivated during above 48hr severely decreased survival rate and shooting rate. Best result on survival rate and shooting rate were obtained when exposed for 24 h. 80 explants of 105 leaf explants survived on 3/2 MS medium containing 2.0 mg/L zeatin and 10 mg/L kanamycin sulfate, and 15 shoots was regenerated on the same medium. To select kanamycin sulfate resistant plant, regenerate as cultured on 3/2 MS medium containing 10 mg/L kanamycin sulfate, and obtained 5 kanamycin resistant plants. Southern blot analysis conformed that the rolC gene was incorporated into the genomic DNA of kanamycin resistant plants.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.4
• /
• pp.294-299
• /
• 2003

The seeds of naturally growing Heteropappus hispidus (Thunb.) were treated by nine different doses (0, 10, 20, 40, 80, 120, 160, 200, 300, 400 Gy) of gamma rays to investigate their germination rate and to quantity the characteristics of their germinated plants as like as leaf appearance and length, the formation rate of anthocyanin color in stem 30 days after germination, the formation rate of rosette leaf and multi-shoot, the flowering and seed-bearing, and shoot length. The germination rate at least up to 120Gy was not greatly affected but was rapidly decreased at over 160Gy. It seemed that lethal dose ($LD_{50}$) of germination was 160Gy. The leaf appearance and growth was also inhibited, but the formation rate of anthocyanin color in the flower stem was enhanced up to 30% with dose. The rosette plants were observed in plants irradiated with higher than 40Gy. Multi-shoots were developed over 80Gy. For a short shoot length and bundle of thin stem, it was considered that they can be selected as the potential pot flower plants, through genetic fixation. In particular, it was suggested that the formation of anthocyanin color in flower stem, rosette and multi-shoot plants induced by the high dose of gamma rays could be utilized as the morphological markers for the mutant selection of Heteropappus hispidus (Thunb.).

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.1
• /
• pp.1-7
• /
• 2013

This study is aimed to investigate the association between anaerobic-aerobic exercise intensity and hand steadiness. Hand steadiness is the decisive contributor to affecting the job performance just as in the rifle shooting and archery in sports and the microscope-related jobs requiring hand steadiness in industries. In anaerobic exercise condition hand steadiness is measured through hand steadiness tester having 9 different diameter holes after each subject exerts 25%, 50%, 75%, and 100% of maximum back strength. In aerobic exercise occasion it is evaluated at each time heart rate reaches 115%, 130%, and 145% of reference heart rate measured in no task condition after they do jumping jack. The results indicate that an increased intensity in both types of exercise reduces hand steadiness, but hand steadiness at 25% of maximum back strength and 115% of reference heart rate is rather greater than at no exercise. Just as the relation between cognitive stress and job performance has upside-down U form, so does the association of physical loading to hand steadiness, which means that a little exercise tends to improve hand steadiness in comparison with no exercise.

• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.615-621
• /
• 2021

In the medical field, radiation provides information for the diagnosis and treatment of diseases. As the use of radiation increases and the risk of exposure increases, interest in radiation protection is also rapidly increasing. Lead shielding material is mainly used, which has a risk of lead poisoning and absorption into the body. Tungsten mixed filament shielding sheets were fabricated with a size of 70 × 70 mm and a thickness of 1, 2, and 4 mm by using a 3D printer. In the general shooting experiment, the thickness of the shielding sheet is 1 ~ 5mm, the tube voltage is 60, 80, 100, 120 kVp and the tube current is 20, 40 mAs. In general photography, Tungsten showed better shielding rate compared to Brass, Copper, and Lead protective tools under all irradiation conditions, and in particular, Tungsten 5 mm showed 100% shielding rate. The 3D-printed tungsten mixed filament shielding is expected to be used as a new shield that can replace the existing lead protection tools as it shows a better shielding rate than the existing lead protection tools in Radiography.

• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.2
• /
• pp.5-9
• /
• 2007

As developing the medical treatment image portion with the change of these times, PACS, which is able to digitalize image portion data, has a lot of data-based image data. Applying this PACS, we would like to settle down RNSXI(real-name shooting X -ray of inspector) system. We interviewed with P ACS's operators of university hospitals which is using PACS in Seoul about the present conditions whether using of RNSXI or not. And we inquired the RNSXI equipments, applying PACS database, and Interface conditions undertook to do in our hospital. All university hospitals in Seoul are set up the P ACS system. But no hospital use the RNSXI. In our hospital, we can check inspector' name or initials who exposure x-ray with the PACS Viewer by looking over equipments(CR, DR, US, MG, MR, CT) and Interface of the DICOM Header data. However, some equipments like RF and Angio can not check inspector' name or initials. Under the Film/System environment, RNSXI system has been used frequently like that inspector's signature or initial added to a patient data. Though the digital medical treatment was developed, RNSXI system was declined. It is necessary to using RNSXI system in order to improving radiologists' rights, even if it is not under the application of the medical treatment image laws. If RNSXI system use, radiologists should specialize in their major and the Repeat rate should be reduced. In environment of PACS, RNSXI system can be used by linking both the equipments and the Interface with a production enterprise of P ACS. Therefore RNSXI system applying the P ACS datebase should settle down in our medical system for being provided lots of data.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.19 no.1
• /
• pp.19-25
• /
• 2024

This paper proposes an artificial intelligence-based personal information area object detection optimization method in an embedded system to de-identify personal information in video data. As an object detection optimization method, first, in order to increase the detection rate for personal information areas when detecting objects, a gyro sensor is used to collect the shooting angle of the image data when acquiring the image, and the image data is converted into a horizontal image through the collected shooting angle. Based on this, each learning model was created according to changes in the size of the image resolution of the learning data and changes in the learning method of the learning engine, and the effectiveness of the optimal learning model was selected and evaluated through an experimental method. As a de-identification method, a shuffling-based masking method was used, and double-key-based encryption of the masking information was used to prevent restoration by others. In order to reuse the original image, the original image could be restored through a security key. Through this, we were able to secure security for high personal information areas and improve usability through original image restoration. The research results of this paper are expected to contribute to industrial use of data without personal information leakage and to reducing the cost of personal information protection in industrial fields using video through de-identification of personal information areas included in video data.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.130-139
• /
• 2021

In this study, size of the fruit of Japanese apricot (plum) was estimated through a plum recognition and size estimation program using 3D images in order to control the Eurytoma maslovskii that causes the most damage to plum in a timely manner. In 2018, night shooting was carried out using a Kinect 2.0 Camera. For night shooting in 2019, a RealSense Depth Camera D415 was used. Based on the acquired images, a plum recognition and estimation program consisting of four stages of image preprocessing, sizeable plum extraction, RGB and depth image matching and plum size estimation was implemented using MATLAB R2018a. The results obtained by running the program on 10 images produced an average plum recognition error rate of 61.9%, an average plum recognition error rate of 0.5% and an average size measurement error rate of 3.6%. The continued development of these plum recognition and size estimation programs is expected to enable accurate fruit size monitoring in the future and the development of timely control systems for Eurytoma maslovskii.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.9 no.2
• /
• pp.45-53
• /
• 2005

This paper investigates the influence of thermal conductivity and variable viscosity on the problem of micropolar fluid in the presence of suction or injection. The fluid viscosity is assumed to vary as an exponential function of temperature and the thermal conductivity is assumed to vary as a linear function of temperature. The governing fundamental equations are approximated by a system of nonlinear ordinary differential equations and are solved numerically by using shooting method. Numerical results are presented for the distribution of velocity, microrotation and temperature profiles within the boundary layer. Results for the details of the velocity, angular velocity and temperature fields as well as the friction coefficient, couple stress and heat transfer rate have been presented.

• Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.330-336
• /
• 2016

The present work is concerned with heat and mass transfer of an electrically conducting second grade MHD fluid past a semi-infinite stretching sheet with convective surface heat flux. The analysis accounts for thermophoresis and thermal radiation. A similarity transformations is used to reduce the governing equations into a dimensionless form. The local similarity equations are derived and solved using Nachtsheim-Swigert shooting iteration technique together with Runge-Kutta sixth order integration scheme. Results for various flow characteristics are presented through graphs and tables delineating the effect of various parameters characterizing the flow. Our analysis explores that the rate of heat transfer enhances with increasing the values of the surface convection parameter. Also the fluid velocity and temperature in the boundary layer region rise significantly for increasing the values of thermal radiation parameter.